Foam core composite sandwich plates and shells with variable stiffness: Effect of the curvilinear fiber path on the modal response

Abstract

This paper presents the free vibration analysis of composite sandwich plates and doubly curved shells with variable stiffness. The reinforcing fibers are located in the external skins of the sandwich structures according to curved paths. These curvilinear paths are described by a general expression that combines power-law, sinusoidal, exponential, Gaussian and ellipse-shaped functions. As a consequence, the reinforcing fibers are placed in these orthotropic layers in an arbitrary manner, in order to achieve the desired mechanical properties. The effect of this variable fiber orientation on the natural frequencies is investigated by means of several parametric studies. As far as the structural theory is concerned, an equivalent single layer approach based on the well-known Carrera Unified Formulation is employed. The Murakami’s function is added to the kinematic model to capture the zig-zag effect, when the soft-core effect is significant. Thus, several higher order shear deformation theories are taken into account in a unified manner. The differential geometry is employed to describe the reference surface of doubly curved shells and panels, which are characterized by variable radii of curvature. The numerical solution is obtained using the generalized differential quadrature method, due to its accuracy and stability features. The present solution is compared with the results available in the literature or obtained by finite element commercial codes.

Keywords

Composite sandwich plates and shells free vibration analysis curvilinear reinforcing fibers higher order equivalent single layer theories generalized differential quadrature

Get full access to this article

View all access options for this article.

References

Reddy

. Mechanics of laminated composite plates and shells, Boca Raton, FL, USA: CRC Press, 2004.

Tornabene

Fantuzzi

. Mechanics of laminated composite doubly-curved shell structures. The generalized differential quadrature method and the strong formulation finite Element method, Bologna, Italy: Esculapio, 2014.

Groh

RMJ

Weaver

. A computationally efficient 2D model for inherently equilibrated 3D stress predictions in heterogeneous laminated plates. Part I: model formulation. Compos Struct 2016; 156: 171–185.

Groh

RMJ

Weaver

. A computationally efficient 2D model for inherently equilibrated 3D stress predictions in heterogeneous laminated plates. Part II: model validation. Compos Struct 2015; 156: 186–217.

Groh

RMJ

Weaver

. Static inconsistencies in certain axiomatic higher-order shear deformation theories for beams, plates and shells. Compos Struct 2015; 120: 231–245.

Groh

RMJ

Weaver

. On displacement-based and mixed-variational equivalent single layer theories for modelling highly heterogeneous laminated beams. Int J Solids Struct 2015; 59: 147–170.

Camanho

Davila

De Moura

. Numerical simulation of mixed-mode progressive delamination in composite materials. J Compos Mater 2003; 37: 1415–1438.

Borrelli

Riccio

Sellitto

et al.

On the use of global-local kinematic coupling approaches for delamination growth simulation in stiffened composite panels. Compos Sci Technol 2015; 115: 43–51.

Borrelli

Caputo

Riccio

et al.

Kinematic approach for a global-local coupling: compressive behaviour of a delaminated panel. Adv Compos Lett 2011; 20: 150–156.

10.

Riccio

Damiano

Raimondo

et al.

A fast numerical procedure for the simulation of inter-laminar damage growth in stiffened composite panels. Compos Struct 2016; 145: 203–216.

11.

Carrera

. Theories and finite elements for multilayered, anisotropic, composite plates and shells. Arch Comput Methods Eng 2002; 9: 87–140.

12.

Viola

Tornabene

Fantuzzi

. General higher-order shear deformation theories for the free vibration analysis of completely doubly-curved laminated shells and panels. Compos Struct 2013; 95: 639–666.

13.

Tornabene

Reddy

. FGM and laminated doubly-curved and degenerate shells resting on nonlinear elastic foundations: a GDQ solution for static analysis with a posteriori stress and strain recovery. J Indian Inst Sci 2013; 93: 635–688.

14.

Tornabene

Viola

Fantuzzi

. General higher-order equivalent single layer theory for free vibrations of doubly-curved laminated composite shells and panels. Compos Struct 2013; 104: 94–117.

15.

Tornabene

Fantuzzi

Bacciocchi

et al.

A new approach for treating concentrated loads in doubly-curved composite deep shells with variable radii of curvature. Compos Struct 2015; 131: 433–452.

16.

Tornabene

Fantuzzi

Bacciocchi

et al.

Accurate inter-laminar recovery for plates and doubly-curved shells with variable radii of curvature using layer-wise theories. Compos Struct 2015; 124: 368–393.

17.

Tornabene

Fantuzzi

Bacciocchi

et al.

Dynamic analysis of thick and thin elliptic shell structures made of laminated composite materials. Compos Struct 2015; 133: 278–299.

18.

Tornabene

Fantuzzi

Bacciocchi

et al.

Free vibrations of composite oval and elliptic cylinders by the generalized differential quadrature method. Thin-Wall Struct 2015; 97: 114–129.

19.

Tornabene

Brischetto

Fantuzzi

et al.

Numerical and exact models for free vibration analysis of cylindrical and spherical shell panels. Compos Part B-Eng 2015; 81: 231–250.

20.

Tornabene

Fantuzzi

Viola

et al.

Stress and strain recovery for functionally graded free-form and doubly-curved sandwich shells using higher-order equivalent single layer theory. Compos Struct 2015; 119: 67–89.

21.

Fantuzzi

Bacciocchi

Tornabene

et al.

Radial basis functions based on differential quadrature method for the free vibration of laminated composite arbitrary shaped plates. Compos Part B-Eng 2015; 78: 65–78.

22.

Tornabene

Fantuzzi

Viola

. Inter-laminar stress recovery procedure for doubly-curved, singly-curved, revolution shells with variable radii of curvature and plates using generalized higher-order theories and the local GDQ method. Mech Adv Mater Struct 2016; 23: 1019–1045.

23.

Tornabene

. General higher order layer-wise theory for free vibrations of doubly-curved laminated composite shells and panels. Mech Adv Mater Struct 2016; 23: 1046–1067.

24.

Tornabene

Fantuzzi

Bacciocchi

et al.

Effect of agglomeration on the natural frequencies of functionally graded carbon nanotube-reinforced laminated composite doubly-curved shells. Compos Part B-Eng 2016; 89: 187–218.

25.

Tornabene

Fantuzzi

Bacciocchi

. The local GDQ method for the natural frequencies of doubly-curved shells with variable thickness: a general formulation. Compos Part B Eng 2016; 92: 265–289.

26.

Bacciocchi

Eisenberger

Fantuzzi

et al.

Vibration analysis of variable thickness plates and shells by the generalized differential quadrature method. Compos Struct 2016; 156: 218–237.

27.

Carrera

. A refined multi-layered finite-element model applied to linear and non-linear analysis of sandwich plates. Compos Sci Technol 1998; 58: 1553–1569.

28.

Saha

Kalamkarov

. Micromechanical thermoelastic model for sandwich composite shells made of generally orthotropic materials. J Sandw Struct Mater 2009; 11: 27–56.

29.

Brischetto

Carrera

Demasi

. Improved response of unsymmetrically laminated sandwich plates by using zig-zag functions. J Sandw Struct Mater 2009; 11: 257–267.

30.

Brischetto

. Hygrothermoelastic analysis of multilayered composite and sandwich shells. J Sandw Struct Mater 2013; 15: 168–202.

31.

Maturi

Ferreira

AJM

Zenkour

et al.

Analysis of laminated shells by Murakami’s zig-zag theory and radial basis functions collocation. J Appl Math 2013; 2013: 1–14.

32.

Carrera

. Historical review of zig-zag theories for multilayered plates and shells. Appl Mech Rev 2003; 56: 287–308.

33.

Carrera

. On the use of the Murakami’s zig-zag function in the modeling of layered plates and shells. Comput Struct 2004; 82: 541–554.

34.

Ribeiro

Akhavan

Teter

et al.

A review on the mechanical behaviour of curvilinear fibre composite laminated panels. J Compos Mater 2014; 48: 2761–2777.

35.

Waldhart C. Design of tow-placed, variable-stiffness laminates. Master of Science in Engineering Mechanics, Virginia Polytechnic Institute and State University, USA, 1996.

36.

Blom AW. Structural performance of fiber-placed, variable-stiffness composite conical and cylindrical shells. PhD Thesis, Delft University of Technology, 2010.

37.

Sendeckyj

. Longitudinal shear modulus of filamentary composite containing curvilinear fibers. Fibre Sci Technol 1970; 2: 211–222.

38.

Hyer

Charette

. Use of curvilinear fiber format in composite structure design. AIAA J 1991; 29: 1011–1015.

39.

Parnas

Oral

Ceyhan

. Optimum design of composite structures with curved fiber courses. Compos Sci Tech 2003; 63: 1071–1082.

40.

Blom

Setoodeh

Hol

JMAM

et al.

Design of variable-stiffness conical shells for maximum fundamental eigenfrequency. Comput Struct 2008; 86: 870–870.

41.

Blom

Tatting

Hol

JMAM

et al.

Fiber path definitions for elastically tailored conical shells. Compos Part B Eng 2009; 40: 77–84.

42.

Blom

Abdalla

Gürdal

. Optimization of course locations in fiber-placed panels for general fiber angle distributions. Compos Sci Technol 2010; 70: 564–570.

43.

Rouhi

Ghayoor

Hoa

et al.

Stiffness tailoring of elliptical composite cylinders for axial buckling performance. Compos Struct 2016; 150: 115–123.

44.

Coburn

Weaver

. Buckling analysis, design and optimisation of variable-stiffness sandwich panels. Int J Solids Struct 2016; 96: 217–228.

45.

Nik

Fayazbakhsh

Pasini

et al.

Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement. Compos Struct 2014; 107: 160–165.

46.

Akbarzadeh

Nik

Pasini

. The role of shear deformation in laminated plates with curvilinear fiber paths and embedded defects. Compos Struct 2015; 118: 217–227.

47.

Kim

Weaver

Potter

. Computer aided modelling of variable angle tow composites manufactured by continuous tow shearing. Compos Struct 2015; 129: 256–267.

48.

Groh

RMJ

Weaver

. Buckling analysis of variable angle tow, variable thickness panels with transverse shear effects. Compos Struct 2014; 107: 0 482–493.

49.

Coburn

Weaver

. Buckling analysis of stiffened variable angle tow panels. Compos Struct 2014; 111: 259–270.

50.

Zucco

Groh

RMJ

Madeo

et al.

Mixed shell element for static and buckling analysis of variable angle tow composite plates. Compos Struct 2016; 152: 324–338.

51.

Raju

Weaver

. Postbuckling analysis of variable angle tow plates using differential quadrature method. Compos Struct 2013; 106: 74–84.

52.

White

Raju

Weaver

. Initial post-buckling of variable-stiffness curved panels. J Mech Phys Solids 2014; 71: 132–155.

53.

Raju

Weaver

. Buckling and postbuckling of variable angle tow composite plates under in-plane shear loading. Int J Solids Struct 2015; 58: 270–287.

54.

White

Weaver

. Post-buckling analyses of variable-stiffness composite cylinders in axial compression. Compos Struct 2015; 123: 190–203.

55.

Akhavan

Ribeiro

. Natural modes of vibration of variable stiffness composite laminates with curvilinear fibers. Compos Struct 2011; 93: 3040–3047.

56.

Yazdani

Ribeiro

. A layerwise p-version finite element formulation for free vibration analysis of thick composite laminates with curvilinear fibres. Compos Struct 2015; 120: 531–542.

57.

Tornabene

Fantuzzi

Bacciocchi

et al.

Higher-order theories for the free vibration of doubly-curved laminated panels with curvilinear reinforcing fibers by means of a local version of the GDQ method. Compos Part B Eng 2015; 81: 196–230.

58.

Honda

Narita

. Natural frequencies and natural modes of laminated composite plates reinforced with arbitrary curvilinear fiber shape paths. J Sound Vib 2012; 331: 180–191.

59.

Akhavan

Ribeiro

. Free geometrically nonlinear oscillations of perfect and imperfect laminates with curved fibres by the shooting method. Nonlinear Dynam 2015; 81: 949–965.

60.

Akhavan

Ribeiro

. Non-linear forced periodic oscillations of laminates with curved fibres by the shooting method. Int J Nonlinear Mech 2015; 76: 176–189.

61.

Ribeiro

. Non-linear modes of vibration of thin cylindrical shells in composite laminates with curvilinear fibres. Compos Struct 2015; 122: 184–197.

62.

Diaz

Fagiano

Abdalla

et al.

A study of interlaminar stresses in variable stiffness plates. Compos Struct 2012; 94: 1192–1199.

63.

Akhavan

Ribeiro

De Moura

MFSF

. Large deflection and stresses in variable stiffness composite laminates with curvilinear fibres. Int J Mech Sci 2013; 73: 14–26.

64.

Yazdani

Ribeiro

. Geometrically non-linear static analysis of unsymmetric composite plates with curvilinear fibres: p-version layerwise approach. Compos Struct 2014; 118: 74–85.

65.

Yazdani

Ribeiro

Rodrigues

. A p-version layerwise model for large deflection of composite plates with curvilinear fibres. Compos Struct 2014; 108: 181–190.

66.

Tornabene

Fantuzzi

Bacciocchi

. Higher-order structural theories for the static analysis of doubly-curved laminated composite panels reinforced by curvilinear fibers. Thin-Wall Struct 2016; 102: 222–245.

67.

Vescovini

Dozio

. A variable-kinematic model for variable stiffness plates: vibration and buckling analysis. Compos Struct 2016; 142: 15–26.

68.

Shu

. Differential quadrature and its application in engineering, Berlin, Germany: Springer, 2000.

69.

Tornabene

Fantuzzi

Ubertini

et al.

Strong formulation finite element method based on differential quadrature: a survey. Appl Mech Rev 2015; 67: 020801–020801.

70.

Viola E, Tornabene F, Fantuzzi N, et al. DiQuMASPAB Software, DICAM Department, Alma Mater Studiorum – University of Bologna, http://software.dicam.unibo.it/diqumaspab-project (accessed 4 June 2017).