Experimental study on the flexural properties of 3D integrated woven spacer composites at room and subzero temperatures

Abstract

The flexural behavior of the 3D integrated woven spacer composites with carbon fiber-reinforced polymer face sheets are performed with epoxy and polyester matrix in the warp direction. The static loading of foam core carbon/epoxy and carbon/polyester composite sandwich panels in three-point flexural test was characterized at room temperature (23℃) and at liquid nitrogen temperature (−40℃). Macro-fracture morphology and progress have been examined to understand the deformation and failure mechanism. Significant increases in the flexural strength with brittle type core shear failure were observed at low temperatures as compared with the corresponding room temperature behavior. The performance of the epoxy-based composite is compared to the polyester one. Significant changes in the flexural properties of the composites have been found, first related to the temperature and then to the resin type. The flexural properties of the epoxy-based composites were affected greatly by temperature and exhibited higher flexural performance than polyester-based composites at low temperatures.

Keywords

3D integrated woven spacer composites subzero temperatures flexural epoxy polyester

Get full access to this article

View all access options for this article.

References

Daniel IM, Gdoutos EE and Rajapakse YDS. Major accomplishments in composite materials and sandwich structures. Netherlands: Springer, 2009, p.818.

Xiao

Zengand

et al.

Compression performance of integrated 3D composite sandwich structures. J Sandwich Struct Mater 2014; 16: 5–21.

Deng F. Acoustic emission applications to composite sandwich structures at room and low temperatures. USA: ProQuest, 2007, p.102.

Glenn

Hyer

. Bending behavior of low-cost sandwich plates. Compos Part A 2005; 36: 1449–1465.

Zhao

et al.

Experimental study on the compression properties and failure mechanism of 3D integrated woven spacer composites. Mater Des 2014; 56: 50–59.

Daniel IM. The influence of core properties on failure of composite sandwich Beams. In: Proceedings of the 8th international conference on sandwich structures (ICSS8), Porto, Portugal, 6–8 May 2008.

Gibson

Ashby

. Cellular solids: structure and properties, 2nd ed. Cambridge: Cambridge University Press, 1999. p.532.

Jiang

Huang

Liu

. Fracture analysis of facesheets in sandwich composites. Compos Part B 2004; 35: 551–556.

El Mahi

Farooq

Sahraoui

et al.

Modelling the flexural behaviour of sandwich composite materials under cyclic fatigue. Mater Des 2004; 25: 199–208.

10.

Davies

GAO

Hitchings

Besant

et al.

Compression after impact strength of composite sandwich panels. Compos Struct 2004; 63: 1–9.

11.

Zhao

Jiang

et al.

Fabrication, properties and failure of 3D integrated woven spacer composites with thickened face sheets. Mater Lett 2015; 148: 103–105.

12.

Aboudi

Cederbaum

. Analysis of viscoelastic laminated composite plates. Compos Struct 1989; 12: 243–256.

13.

Soni

Gibson

Ayorinde

. The influence of subzero temperatures on fatigue behavior of composite sandwich structures. Compos Sci Tech 2009; 69: 829–838.

14.

Sharma

Gibson

Ayorinde

. Fatigue of foam and honeycomb core composite sandwich structures: a tutorial. J Sandwich Struct Mater 2006; 8: 263–319.

15.

Asaro

. Designing sandwich polymer matrix composite panels for structural integrity in fire. Compos Struct 2009; 88: 461–467.

16.

Sadighi

Hosseini

. Finite element simulation and experimental study on mechanical behavior of 3D woven glass fiber composite sandwich panels. Compos Part B Eng 2013; 55: 158–166.

17.

Mountasir

Hoffmann

Cherif

et al.

Competitive manufacturing of 3D thermoplastic composite panels based on multi-layered woven structures for lightweight engineering. Compos Struct 2015; 133: 415–424.

18.

Karahan

Gül

Karahan

et al.

Static behavior of three-dimensional ıntegrated core sandwich composites subjected to three-point bending. J Rein Plast Compos 2013; 32: 664–678.

19.

ASTM Standard C393. Standard test method for core shear properties of sandwich constructions by beam flexure. West Conshohocken, PA: ASTM International, 2006.

20.

Hufenbach

Gude

Böhm

et al.

The effect of temperature on mechanical properties and failure behaviour of hybrid yarn textile-reinforced thermoplastics. Mater Des 2011; 32: 4278–4288.

21.

Kim

Kang

Kim

et al.

Tensile response of graphite/epoxy composites at low temperatures. Compos Struct 2007; 79: 84–89.

22.

Zhao

Jiang

et al.

Experimental study on the bending properties and failure mechanism of 3D integrated woven spacer composites at room and cryogenic temperature. Compos Struct 2014; 111: 56–65.

23.

Daniel IM and Liber T. Lamination residual stresses in multi-layered fiber composites. Interim report NASA CR-134826, TN D6146-I, February 1971. Washington, DC: National Aeronautics and Space Administration.

24.

Kichhannagari S. Effects of extreme low temperature on composite materials. University of New Orleans Theses and Dissertations, 2004, p.165.

25.

Koufopoulos

Theocaris

. Shrinkage stresses in two-phase materials. J Compos Mater 1969; 2: 308–320.

26.

Cormier L and Joncas S. Effects of cold temperature, moisture and freeze-thaw cycles on the mechanical properties of unidirectional glass fiber-epoxy composites. In: 51st AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference, Orlando, FL, 12 April 2010, pp.1–19. USA: AIAA.