Failure behaviour of grid-scored foam cored composite sandwich panels for wind turbine blades subjected to realistic multiaxial loading conditions

Abstract

The load response and failure behaviour of ‘grid-scored’ sandwich panels used in wind turbine blades have been investigated. This paper presents the results of a combined experimental and numerical investigation of the load response and failure behaviour of a specific grid-scored foam cored composite sandwich panel configuration subjected to multiaxial quasi-static loading conditions that are representative for realistic loading conditions present in wind turbine blades. From the experimental evidence a criterion based on fracture mechanics has been proposed for predicting the onset of fracture in the resin grid. The criterion can be applied directly in conjunction with finite element modelling based on 3D solid elements where the resin grid in situ the core is fully modelled. However, since most full-scale blade models are based on first-order shear deformation theory where the core properties normally are homogenised a strain-based failure criterion is also proposed. The input for this failure criterion is the allowable resin grid strain, which can be obtained from a simple uniaxial tension test of a grid-scored sandwich beam specimen. The predictions of the criteria have been compared with the experimental observations, and a good correlation has been found.

Keywords

Grid-scored sandwich structures wind turbine blades experimental characterisation multiaxial testing failure modeling

Get full access to this article

View all access options for this article.

References

Zenkert

. An introduction to sandwich construction, London: EMAS, 1997.

Trofka S. Effects of contour cuts on shear properties of ductile foam cores. In: Proceedings of the composites & polycon 2007 conference, Tampa, FL USA, 2007.

Fathi

Wolff-Fabris

Altstädt

. An investigation on the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing options. J Sandwich Struct Mater 2013; 15(5): 487–508.

Truxel

Avilés

Carlsson

. Influence of face/core interface on debond toughness of foam and balsa cored sandwich. J Sandwich Struct Mater 2006; 8: 237–258.

May-Pat

Avilés

Aguilar

. Mechanical properties of sandwich panels with perforated foam cores. J Sandwich Struct Mater 2011; 13: 427–444.

Johannes

Jakobsen

Thomsen

. Examination of the failure of sandwich beams with core junctions subjected to in-plane tensile loading. Compos Sci Technol 2009; 69(9): 1447–1457.

Johannes M and Thomsen OT. Localised effects in sandwich structures with internal core junctions: Modelling and experimental characterisation of load response, failure and fatigue. In: Daniel IM, Gdoutos EE and Rajapakse YDS. Major accomplishments in composite materials and sandwich structures. New York: Springer, 2010, pp. 229–277.

Laustsen S, Lund E, Kühlmeier L, et al. Development of a high-fidelity experimental substructure test rig for grid-scored sandwich panels in wind turbine blades. Strain - Int J Exp Mech 2013. DOI: 10.1111/str.12072.

Wisnom

. Size effects in the testing of fibre-composite materials. Compos Sci Technol 1999; 59(13): 1937–1957.

10.

Wisnom

Khan

Hallett

. Size effects in unnotched tensile strength of unidirectional and quasi-isotropic carbon/epoxy composites. Compos Struct 2008; 84(1): 21–28.

11.

Overgaard

LCT

Lund

. Structural collapse of a wind turbine blade. Part B: Progressive interlaminar failure models. Compos Part A: Appl Sci Manuf 2010; 41(2): 271–283.

12.

Overgaard

LCT

Lund

Thomsen

. Structural collapse of a wind turbine blade. Part A: Static test and equivalent single layered models. Compos Part A: Appl Sci Manuf 2010; 41(2): 257–270.

13.

Chu

Ranson

Sutton

. Applications of digital-image-correlation techniques to experimental mechanics. Exp Mech 1985; 25(3): 232–244.

14.

Sutton

Wolters

Peters

. Determination of displacements using an improved digital correlation method. Image Vis Comput 1983; 1(3): 133–139.

15.

Thomsen OT and Larsen J. Simplified rule of mixtures approach for the accurate estimation of the elastic properties of grid-scored polymer foam core sandwich plates. In: Proceedings of the 8th international conference on sandwich structures (ICSS-8), Porto, Portugal, 2008, pp. 261–274.

16.

Taher

Thomsen

Dulieu-Barton

. Determination of mechanical properties of PVC foam using a modified Arcan fixture. Compos Part A: Appl Sci Manuf 2011; 43: 1678–1708.

17.

Laustsen S, Lund E, Kühlmeier L, et al. Experimental characterisation of the progressive failure of grid-scored sandwich structures in wind turbine. In: Proceedings of the 19th international conference on composite materials (ICCM-19), Montreal, Canada, 2013, pp. 3344–3349.

18.

Grosse

Ohtsu

. Acoustic emission testing, New York: Springer, 2008.

19.

Christensen

. A comprehensive theory of yielding and failure for isotropic materials. J Eng Mater Technol 2007; 129(2): 173–173.

20.

Suo

. Tunneling cracks in constrained layers. J Appl Mech 1993; 60(4): 890–894.

21.

Saenz

Carlsson

Karlsson

. Characterization of fracture toughness (Gc) of PVC and PES foams. J Mater Sci 2011; 46(9): 3207–3215.

22.

Tada

Paris

Irwin

. The stress analysis of cracks handbook, St. Louis, MO: Del Research, 1985.

23.

Osswald

Menge

. Materials science of polymers for engineers, Munich: Carl Hanser Verlag, 2003.

24.

Christensen

Freeman

DeTeresa

. Failure criteria for isotropic materials, applications to low-density types. Int J Solids Struct 2002; 39(4): 973–982.

25.

Gdoutos

Daniel

Wang

. Multiaxial characterization and modeling of a PVC cellular foam. J Thermoplast Compos Mater 2001; 14(5): 365–373.