The mechanical properties of structural polymer foams are investigated after crushing in the rise direction (out-of-plane axis of a foam material block). The crushed foams are loaded in uniaxial compression, tension, or shear. All tests are performed in the plane of the foam block, i.e., perpendicular to the crushing direction. For comparison, virgin foams are also characterized. The results are discussed featuring the properties of crushed foams, which can be important for the damage tolerance analysis of a foam core sandwich structure.
Shipsha, A., Hallström, S. and Zenkert, D. (2003). Failure Mechanisms and Modelling of Impact Damage in Sandwich Beams-A 2D Approach: Part I-Experimental Investigation, Journal Sandwich Structures and Materials, 5(1): 7-32.
2.
Li, Q.M. , Mines, R.A.W. and Birch, R.S. (2000). The Crush Behaviour of Rohacell-51WF Structural Foam, International Journal of Solids and Structures, 37: 6321-6341.
3.
Li, Q.M. and Mines, R.A.W. (2002). Strain Measures for Rigid Crushable Foam in Uniaxial Compression, International Journal for Strain Measurement , 38(4): 132-140.
4.
Koissin, V. and Shipsha, A. (2006). Deformation of Foam Cores in Uniaxial Compression-tension Cycle, Journal Sandwich Structures and Materials, 8(5): 395-406.
5.
Koissin, V. and Shipsha, A. (2001). Mechanical Properties of Pre-compressed and Undamaged Divinycell H-grade Foam Core, Report C2001-5, Dept. of Aeronautics, Royal Institute of Technology, Stockholm , Sweden.
6.
Shipsha, A., Hallström, S. and Zenkert, D. (2003). Failure Mechanisms and Modelling of Impact Damage in Sandwich Beams-A 2D Approach: Part II-analysis and modelling, Journal Sandwich Structures and Materials, 5(1): 33-52.
Gibson, L.J. and Ashby M.F. (1988). Cellular Solids-Structure and Properties, Pergamon Press, Oxford.
10.
Olsson, K.-A. and Lönnö, A. (1989). Test Procedure for Foam Core Materials. In: Proc. of 1st Int. Conference on Sandwich Constructions, pp. 293-318, Stockholm, Sweden.
11.
Branner, K. (1995). Capacity and Lifetime of Foam Core Sandwich Structures , PhD thesis, Dept. of Naval Architecture & Offshore Enginering, Technical University of Denmark, Lyngby , Denmark.
12.
Bull, P.H. (1998), Report S98-05, Dept. of Aeronautics, Royal Institute of Technology, Stockholm, Sweden.
13.
Benderly, D. , Zafran, J. and Putter, S. (2003). Shear Testing of Polymeric Foams, Journal of Testing and Evaluation , 31(5): 405-412.
