Crush Initiators for Increased Energy Absorption in Composite Sandwich Structures

Abstract

Sandwich composites loaded in edgewise compression often display low energy absorbing failures due to facesheet debonding and/or buckling-type failure modes. Although crush initiators have been used to trigger progressive crushing in monolithic composites, little research has been performed to investigate the use of crush initiators with sandwich composites. In this investigation, fixture-based crush initiators were evaluated for producing progressive crushing failures and high levels of energy absorption under dynamic edgewise compression loading. Four different sandwich configurations were investigated, fabricated using woven or random mat carbon/epoxy facesheets with foam or balsa wood cores. Results show that the effectiveness of crush initiators is highly dependant upon both the facesheet and core materials used in the sandwich construction. Additionally, the initiation of progressive crushing of a sandwich composite appears to be dependent on the stiffness and strength properties of both the facesheets and core as well as the strength of the facesheet/core interfaces. These findings suggest that a sandwich composite may be designed for enhanced energy absorption through the proper selection of facesheet and core materials and geometries such that high-energy absorbing failure progressions are produced, especially with the application of a crush initiator.

Keywords

sandwich panel energy absorption crush initiator impact.

Get full access to this article

View all access options for this article.

References

Allen, H.G. (1969). Analysis and Design of Structural Sandwich Panels , Pergamon Press, Oxford.

Plantema, F.J. (1966). Sandwich Construction, Wiley , New York.

Vinson, J.R. (1999). The Behavior of Sandwich Structures of Isotropic and Composite Materials, Technomic, Lancaster.

Crashworthiness and Energy Management , Composite Materials Handbook CMH-17-3F (2007), Vol. 3, Ch. 14, http://www.cmh17.org.

Lavoie, J.A. and Morton, J. (1993). Design and Application of a Quasistatic Crush Fixture for Investigating Scale Effects in Energy Absorbing Composite Plates , NASA CR 4526.

Lavoie, J.A. and Dellas, S. (1996). Dynamic Crush Tests of Energy-Absorbing Laminated Composite Plates, Composites Part A, 27: 467-475.

Hanagud, S. , Craig, J.I. , Sriram, P. and Zhou, W. (1989). Energy Absorption Behavior of Graphite Epoxy Composite Sine Webs, Journal of Composite Materials, 23: 448-459.

Thornton, P.H. , Harwood, J.J. and Beardmore , P. (1985). Fiber-Reinforced Plastic Composites for Energy Absorption Purposes , Composites Science and Technology, 24: 275-298.

Botkin, M.E. , Johnson, N.L. , Simunovic, S. and Zywicz, E. (1998). Crashworthiness Simulation of Composite Automotive Structures, In: 13th Annual Engineering Society of Detroit Advanced Composites Technology Conference and Exposition, Detroit, MI.

10.

Van Otten, A.L. , Ellerbeck, N.S. , Adams , D.O. , Nailadi, C. and Shahwan, K. (2004). Evaluation of Sandwich Composites for Automotive Applications, In: 49th International SAMPE Symposium, Long Beach, CA.

11.

Van Otten, A.L. , Ellerbeck, N.S. , Adams, D.O. and Nailadi, C. (2006). Static and Dynamic Characterization of Sandwich Composites for Automotive Applications, In: 21st Technical Conference of the American Society of Composites, Dearborn, MI.

12.

Synthetic Carbon Fiber Fabric I.O.P. Woven, Class 70, BGF Industries, Inc. (2002), Los Angeles, CA.

13.

P4 Carbon Preform (2003), Automotive Composites Consortium, Detroit, MI.

14.

BPF 862 Epon Resin , RSC 9553 curing agent (2002), E.V. Roberts , Carson, CA.

15.

LAST-A-FOAM FR-6710 Polyurethane Foam (2002), General Plastics Manufacturing Company, Tacoma, WA.

16.

S67 End-Grain Balsa Wood (2002), Alcan Baltek Corporation, Northvale, NJ.

17.

Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions , ASTM C 364 (2000). American Society for Testing and Materials, West Conshohocken, PA.

18.

Polymer Matrix Composites: Sandwich Structures, Composite Materials Handbook CMH-17-6 Vol. 6 (2002).

19.

Structural Sandwich Composites (1968). MIL-HDBK-23A.

20.

Camarda, C.J. (1990). Experimental Investigation of Graphite/Polyimide Sandwich Panels in Edgewise Compression, NASA-TM-81895.

21.

Lagace, P.A. and Mamorini, L. (2000). Factors in the Compressive Strength of Composite Sandwich Panels with Thin Facesheets , Journal of Sandwich Structures and Materials, 2: 315-330.

22.

Fleck, N.A. and Sridhar, I. (2002). End Compression of Sandwich Columns, Composites, Part A, 33: 353-359.

23.

Vadakke, V. and Carlsson, L.A. (2004). Experimental Investigation of Compression Failure Mechanisms of Composite Faced Foam Core Sandwich Specimens , Journal of Sandwich Structures and Materials , 6: 327-342.

24.

Vinson, J.R. (2005). Plate and Panel Structures of Isotropic, Composite and Piezoelectric Materials, Including Sandwich Construction , Springer-Verlag, New York.