Mold Filling Simulation of Sandwich Composite Structures Manufactured by Liquid Molding: A Parametric Study

Abstract

The mold filling stage in the manufacturing of sandwich composite structures with fiber reinforced foam core was studied with numerical simulations. Three different geometries of sandwich core reinforcement were considered in the form of fiber layers forming angles of 450 or 900 with the facings or in the form of equally spaced separate strands (webs). The influence of variable core and face reinforcement permeability and location of the injecting edge on the flow front progression and filling time was explored. The results suggest that permeability of the core has a significant influence on filling pattern and mold filling time. Experimental and predicted flow front developments and flow rates for a radial injection case under constant pressure were compared.

Get full access to this article

View all access options for this article.

References

1. Karlsson, K. F. , B. T. Astrom . "Manufacturing and Applications of Structural Sandwich Components," Composites, Part A 28A (1997), 97-111.

2. Schwartz, M. M. , Composite Materials, V2, Prentice Hall 1997.

3. Al-Hamdan, A. , C. D. Rudd , A. C. Long , "Dynamic Core Movements During Liquid Composite Moulding of Sandwich Structures," Composites, Part A 29A (1998), 273-282.

4. Wirth, S. , R. Gauvin , "Experimental Analysis of Core Crushing and Core Movement in RTM and SRIM Foam Cored Composite Parts," Journal of Reinforced Plastics and Composites, v 17, n11/1998 pp. 964-988.

5. Advani, S. G. , M. V. Bruschke and R. Paruas , "Chapter 12: Resin Transfer Molding" (pp. 465-516) in Flow and Rheology in Polymeric Composites Manufacturing, Elsevier Publishers, Amsterdam (1994).

6. Bruschke, M. and S. G. Advani , "A Finite Element/Control Volume Approach to Mold Filling in Anisotropic Porous Media," Polymer Composites, 11 (1990), 398-405.

7. Lee, J. L. , W. B. Young , R. J. Lin , "Mold Filling and Cure Modeling of RTM and SRIM Processes," Composite Structures, 27 (1994), 109-120.

8. Trochu, F. , R. Gauvin , Z. Zhang , "Simulation of Mold Filling in Resin Transfer Molding by Non-Conforming Finite Elements," Proc. 3rd Int. Conf on Computer Aided Design in Composite Material Technology, CAD-COMP 92, 1995.

9. Parnas, R. S. , F. R. Phelan, Jr. , "The Effect of Heterogeneous Porous Media on Mold Filling in Resin Transfer Molding," SAMPE Q., 22 (1991), 53-60.

10.

10. Chan, A. W. , R. J. Morgan , "Tow Impregnation During Resin Transfer Molding of Bi-Directional Nonwoven Fabrics," Polymer Composites, 14(4) (1990), 335-340.

11.

11. Pillai, K. M. and S. G. Advani , "A Numerical Simulation of Unsaturated Flow in Woven Fiber Preforms During Resin Transfer Molding Process," Polymer Composites, 19 (1998), 71-80.

12.

12. Slade, J., "The Effect of Flow Parameters and Preform Architecture on the Saturation of Dual Scale Porous Media," MSc Thesis (1999), University of Delaware.