Elastic Foundation Analysis of Tilted Sandwich Debond (TSD) Specimen

Abstract

The tilted sandwich debond (TSD) specimen for characterizing debonding of a sandwich structure is analyzed using elastic foundation theory. The face sheet is considered as a cantilever beam in the debonded region of the specimen and as a beam of finite length supported by an elastic foundation in the bonded region. An analytical model for the beam deflection is developed that may be utilized for design of the specimen, fracture analysis, and data reduction of face/core debond toughness. A parametric investigation was conducted to examine how material and geometrical parameters of the constituents of the sandwich and test configuration influence the compliance of the TSD specimen. Testing was performed on a sandwich consisting of glass/vinylester face sheets over a H200 PVC foam core. The compliance predictions for this and a previously examined sandwich agreed favorably with experimental data over a large range of crack lengths and tilt angles. The debond toughness reduced from experimentally calibrated compliance and from the foundation model was consistent.

Get full access to this article

View all access options for this article.

References

1. D. Zenkert, "Damage Tolerance of Foam Core Sandwich Constructions," Ph.D Thesis, The Royal Institute of Technology, Stockholm, Sweden, 1987.

2. L. A. Carlsson , L. S. Sendlein and S. L. Merry , "Characterization of Face Sheet/Core Debonding of Composite Sandwich Beams," J. Compos. Mater, Vol. 25, 1991, pp. 101-116.

3. S. Prasad and L. A. Carlsson , "Debonding and Crack Kinking in Foam Core Sandwich Beams-I. Analysis of Fracture Specimens," Eng. Fracture Mech., Vol. 47, 1994, pp. 813-824.

4. S. Prasad and L. A. Carlsson , "Debonding and Crack Kinking in Foam Core Sandwich Beams-II: Experimental Investigation," Eng. Fracture Mech., Vol. 47, 1994, pp. 825-841.

5. X. Li and L. A. Carlsson , "The Tilted Sandwich Debond (TSD) Specimen for Face/Core Interface Fracture Characterization," J. Sandwich Struct. Mater, Vol. 1, 1999, pp. 60-75.

6. L. Falk , "Foam Core Sandwich Panels with Interface Disbonds," Compos. Struct., Vol. 28, 1994, pp. 481-490.

7. W. J. Cantwell and P. Davies , "A Study of Skin-Core Adhesion in Glass Fibre Reinforced Sandwich Materials," Appl. Compos. Mater, Vol. 3, 1996, pp. 407-420.

8. J. M. Whitney , "Structural Analysis of Laminated Anisotropic Plates," Technomic Publishing Co., Inc., Lancaster, 1987.

9. S. P. Timoshenko , "Strength of Materials," Part II, Krieger, Malabar, 1984.

10.

10. M. F. Kanninen , "An Augmented Double Cantilever Beam Model for Studying Crack Propagation and Arrest," Intl. J. of Fracture, Vol. 9, no. 1, 1973, pp. 83-92.

11.

11. H. L. Ewalds and R. J. H. Wanhill , "Fracture Mechanics," Edward Arnold, London, 1989.

12.

12. Divinycell , "Technical Specification-H. Grade," Divinycell International AB, Laholm, Sweden.

13.

13. M. Stibe , "Fracture Toughness of Divinycell H 100, H 130 and H200," Barracuda Technologies AB, Sweden, 1991.

14.

14. J. Kinloch and R. J. Young , "Fracture Behaviour of Polymers," Elsevier, London, 1985.

15.

15. N. A. Fleck , J. W. Hutchinson and Z. Suo , 'Crack Path Selection in a Brittle Adhesive Layer," Int. J. Solids Struct., Vol. 27, 1991, pp. 1683-1701.

16.

16. K. M. Liechti and Y. S. Chai , "Asymmetric Shielding in Interfacial Fracture under In-Plane Shear," J. Appl. Mech., Vol. 59, June 1992, 295-304.

17.

17. M. Burman, "Fatigue Crack Initiation and Propagation in Sandwich Structures," Ph.D Thesis, The Royal Institute of Technology, Stockholm, Sweden, 1998.

18.

18. P. H. Bull, "Core Joints in Sandwich Beams," Masters Thesis, The Royal Institute of Technology, Stockholm, Sweden, 1998.

19.

19. T. Echtermeyer and D. McGeorge , "Fracture Toughness of Core Skin Interfaces of Sandwich Materials," Proc. 4th Int. Conf. on Sandwich Construction, Stockholm, Sweden, June 1998, EMAS, London, U.K., ed. K-A. Olsson , pp. 635-646.