Performance Linkage Approach: Environmental Control of Buildings Part I: Construction Today

Bankvall, C.G. 1986. "Air Movements and the Thermal Performance of the Building ," ASTM STP 922, American Soc. for Testing and Mateirals , pp. 124-131.

Bankvall, C.G. 1986a. "Thermal Performance of the Building Envelope as Influenced by Workmanship," ASTM STP 922, American Soc. for Testing and Materials, pp. 679-684.

Becker, R. 1985. "A Method for the Generation of Weighing Factors for Performance Evaluation Systems," Building and Environment, 20(4):195-200.

Blach, K. and G. Christensen. 1976. "The Performance Concept," Building Research and Practice, May/June:152-166.

Bloomberg, T. and J. Claesson. 1993. "Metal Thermal Bridges in Thermal Insulation ," Lund U., presented at CIB W40, Meeting at Budapest .

Bomberg, M. 1982. "Development of Thermal Insulation Performance Test Methods ," ASTM Standardization News, Dec.:26-32.

Bomberg, M. 1990. "Scaling Factors in Aging of Gas-Filled Cellular Plastics ." Journal of Thermal Insulation, 13(Jan):149-159.

Bomberg, M. and W.C. Brown. 1993. "Building Envelope and Environmental Control," J. Thermal Insul. and Bldg. Envs., 16(April):306-311 and 17(July):5-12.

Brown, W.C. 1986. "Heat-Transmission Tests on Sheet Steel Walls," ASHRAE Transactions, 92(2B):554-566.

Brown, W.C. and N.V. Schwartz. 1987. "The Thermal and Air Leakage Performance of Residential Walls," Presented to SPI Conference in Huntsville, Ont, IRC paper No. 1527.

Brown, W.C. and D.G. Stephenson . 1993. "A Guarded Hot Box Procedure for Determining the Dynamic Response of Full-Scale Wall Specimens," ASHRAE Transactions: Research, I:632-642; II:643-660.

Brown, W.C. , M.T. Bomberg , J.M. Ullett and J. Rassmussen. 1993. "Measured Thermal Resistance of Frame Walls with Defects in the Installation of Mineral Fibre Insulation," J. Therm. Insul. & Bldg. Ens., 16:318-339.

Christian, J.E. , G.E. Courville , R.S. Graves , R.L. Linkous , D.L. McElroy , F.J. Weaver and D.W. Yarbrough. 1991. "Thermal Measurement of m-situ and Thin Specimen Aging of Experimental Polyisocyanurate Roof Insulation Foamed with Alternative Blowing Agents," ASTM STP 1116, pp. 142-166.

Cullen, W.C. and T. Sneck. 1980. "A Final Report of RILEM Technical Committee 27-EVS, the Evaluation of External Vertical Surface of Buildings," Bulletin RILEM, Materiaux et Construction, 13(76).

European Passive Solar Handbook 1986. Commission of the European Communities, Directorate General XII for Science , Research and Development, Solar Energy Division, Brussels.

Fang, J.B. , R.A. Grot , K.W. Childs and G.E. Courville. 1984. "Heat Loss from Thermal Bridges," Building Research and Practice, CIB 12(6):346-352.

Flynn, J.E. and A.W. Segil. 1970. Architectural Interior Systems, Lighting, Air Conditioning, Acoustics, NY: Van Nostrand Reinhold.

Franklin Associates. 1991. " Comparative Energy Evaluation of Plastic Products and Their Alternatives for the Building and Construction and Transportation Industries," Report for the Society of Plastics Industry Inc.

Garrett, K.W. 1979. "An Assessment of the Calculation Methods to Determine the Thermal Performance of Slotted Building Blocks," Build. Services Eng. Res. and Technology, pp. 24-30.

Gertis, K. 1982. "Building Physics: Trends and Future Tasks for Civil Engineers and Architects," Int. Assoc. for Bridge and Structural Eng. , S-21/82.

Greason, D.M. 1983. "Calculated Versus Measured Thermal Resistances of Simulated Building Walls Incorporating Airspaces," ASHRAE Transactions , Vol. 89, Pt. 1 (preprint AC-83-12 No. 3).

Grodin. 1993. "Damage Functions for Service Life Prediction of Zink and Steel Components," Internal Report No. 647, Institute for Research in Construction NRC.

Harrison, H.W. 1983. "Practical Problems in Estimating Service Life of Components and Elements in Housing," CIB 1983, "To Build and Take Care of What We Have Built with Limited Resources ," Building Technology Design and Production, 2:81-90; see also Bonshor, R.B. and H.W. Harrison. 1982. "Quality in Traditional Housing," Vol. 1-3, London: HMSO.

Hens, H. 1992. "IEA Annex 14, Condensation and Energy," J. Thermal Insul., 15:261-273.

Hollingworth, M. , Jr. 1983. "Experimental Determination of the Thermal Resistance of Reflective Insulations," ASHRAE Transactions, Vol. 89, Pt. 1 (preprint AC-83-12 No. 2).

Hutcheon, N.B. 1953. "Fundamental Considerations in the Design of Exterior Walls in Buildings," National Council of Canada, Div. Building Research, Tech. Report No. 13, see also "Philosophy of Design and Testing of Joints," CIB Symposium on Joints, Oslo 1967.

Hutcheon, N.B. 1971. "The Utility of Building Science," invited address at the Central Building Research Institute, India, October 1971, see also Symposium on Panelized Building Systems June 2-3, 1970 at Sir George Williams University, Montreal, Canada.

Isberg, J. 1988. "The Thermal Conductivity of Polyurethane Foams," Gothenburg, Sweden. Div. of Building Technology, Chalmers U. of Technology.

Johannesson, G. 1981. "Active Heat Capacity, Models and Parameters for the Thermal Performance of Buildings," Lund Inst. of Technology, Report TVBH-1003, Lund, Sweden.

Karagiozis, A. and M.K. Kumaran. 1993. "Computer Model Calculation on the Performance of Vapor Barriers in Canadian Residential Buildings," ASHRAE Transactions, 99(2):991-1003.

Knapen, M. and P. Standaert. 1985. "Experimental Research on Thermal Bridges in Different Outer-Wall Systems," Building Physics Lab., Kath. U. of Leuven, Presented at CIB-W40 at Holzkirchen.

Kosny, J. and A.O. Desjarlais . 1994. "Influence of Architectural Details on the Overall Thermal Performance of Residential Wall Systems," J. Therm. Insul. and Bldg. Envs., 18:53-69.

Kosny, J. 1995. "Comparison of Thermal Performance of Wood Stud and Metal Frame Wall Systems," J. Therm. Insul. and Bldg. Envs., 19:59-71.

Knappen, M. and P. Standaert. 1985. "Experimental Research on Thermal Bridges in Different Outer-Wall Systems," Building Physics Lab., Kath. U. of Leuven, Presented at CIB-W40 at Holzkirchen.

Kuehn, T.H. and E.A.B. Maldonado . 1984. "Two-Dimensional Transient Heat Transfer Through Composite Wood Frame Walls-Field Measurements and Modeling ," Energy and Buildings, 6:55-66.

Lstiburek, J.W. 1992. "Two Studies of Mold and Mildew in Florida Buildings," J. Thermal Insul. and Bldg. Envs., 16( July):66-80.

Lstiburek, J.W. 1994. "Mold, Moisture and Indoor Air Quality, A Guide for Designers, Builders and Building Owners," Building Science Corporation , pp. 1-224.

Lstiburek, J.W. 1995. "A Case of Cladding Problems Highlights the Need for a Holistic Approach to the Facility Design," J. Thermal Insul. and Bldg Envs., 19:12-27.

Mitalas, G.P. 1979 "Effect of Building Mass on Annual Heating Energy Requirements ," 2nd Int. CIB Symposium on Energy Conservation in Built Environment, Copenhagen, 2:7-16.

Ojanen, T. and M.K. Kumaran. 1996. In Press. "Effect of Exfiltration on Hygrothermal Behaviour of a Residential Wall Assembly," J. Thermal Insul. and Bldg. Envs., 19( Jan. issue).

Pratt, A.W. 1969. "Thermal Transmittance of Walls Obtained by Measurements on Test Panels in Natural Exposure," Building Science, 3:147-169.

Plonski, W. 1965. Thermal Protection of Buildings, Support Information for Designers (In Polish), Warsaw, 1965.

Robinson, T. 1992. "Moisture Challenges in Canadian Energy Efficient Housing ," J. Thermal Insul. and Bldg. Envs., 16:112-120.

Sasaki, J.R. 1971. "Thermal Performance of Steel-Stud Exterior Walls," Building Res., Note 77, NRC Ottawa.

Sandberg, P.I. 1990. "Deterioration of Thermal Insulation Properties of Extruded Polystyrene. Classification and Quality Control System in Sweden," ASTM STP 1030, pp. 197-204.

Silberstein, A. and H. Hens. 1996. "Effects of Air and Moisture on Thermal Performance of Insulation in Ventilated Roofs and Walls," J. Thermal Insul. and Bldg. Envs., Vol. 19, January issue (in press).

Shu, L.S. , A.E. Fiorato and J.W. Howanski. 1979. "Heat Transmission Coefficients of Concrete Block Walls Withcore Insulation," Thermal Perf. of Exterior Building Envelopes, pp. 421-435.

Swartz, J. 1995. "Better Building Envelopes: Changes to Part 5 of the National Building Code," Construction Canada, May:33-35.

Trethowen, H.A. "Validating the Isothermal Planes Method for r-Value Predictions," ASHRAE, preprint SD-95-5-1, Transactions, 1995, Vol. 101, Pt. 2.

Valore, R.C. 1980. "Calculation of U-Values of Hollow Concrete Masonry," Concrete Int., pp. 40-63.

Valore, R. , A. Tuluca and A. Caputo. 1988. "Assessment of the Thermal and Physical Properties of Masonry Block Products," ORNL/Sub/86-22020/1, Oak Ridge National Laboratory.

Wagner, A. , L. Preissler , R. Muller and R. Rudolphi. 1984. Measure or Calculate-Thermal Insulation as the Building Protection Problem (in German), Bundesanstalt fur Materialprufung (BAM), Berlin, June 1984, Heft 6, pp. 419-421.

Wilkes, K.E. and J.L. Rucker. 1983 "Thermal Performance of Residential Attics ," Energy and Buildings, 5:263-277.

Wilkes K. E., R.L. Wendt , A. Delmas and P.W. Childs. 1991. "Thermal Performance of One Loose-Fill Fiberglass Attic Insulation," ASTM STP 1116, American Soc. for Testing and Materials, pp. 275-291.

Wolf, S. , K.R. Solvason and A.G. Wilson. 1966. "Convective Air Flow Effects with Mineral Wool Insulation in Wood-Frame Walls," ASHRAE Transactions , Vol. 72, Part 2, pp. III 3.1-3.8.

Wright, J.R. 1972. "The Performance Approach: History and Status," NBS Spec. Publication 361, Vol. 2, "Performance Concept in Buildings"; Proceedings of Joint RILEM-ASTM-CIB Symposium, May 2-5, 1972, Philadelphia, PA.