Patterned Staining of Rendered Facades: Hygro-Thermal Analysis as a Means for Diagnosis

Abstract

Pathological phenomena in physical performance of buildings, such as façade staining, require accurate diagnosis and understanding of causative mechanisms in order to suggest effective remedial means. Lately, rendered façades of newly built residential buildings in Israel have developed patterned staining revealing the underlying structure. Samples from stained areas indicated selective growth of microorganisms. Typical finishes proved to support fungi growth under optimal growth conditions. However, this could not explain selective growth. Only advanced hygro-thermal analysis could explain in detail substrate-dependent surface moisture content evolutions. It showed that significantly larger moisture contents are obtained above thermally insulated parts, even in the absence of surface condensation and rain, and that decreasing the rendering's moisture diffusivity enhances these differences.

Get full access to this article

View all access options for this article.

References

Adan, O. C. G. (1994). On the Fungal Defacement of Interior Finishes, Ph.D. Thesis, Eindhoven University of Technology, Eindhoven, The Netherlands.

ASTM Standard G 21-90 (1990). Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi, American Society for Testing and Materials, West Conshohocken, Pennsylvania, USA .

Atlas, R. M. (1993). Handbook of Microbiological Media, In: Parks, L.C. (Ed.), CRC Press, Boca Raton, Florida, USA .

Becker, R. (2002 August). Validation of a Mathematical and Numerical Model for Dynamic 1-D Moisture Content Evolution in Layered Building Elements , RILEM Journal Materials and Structures, 35(251): 382-388 .

Becker, R. and Puterman, M. (1987). Elimination of Mould Growth in Buildings, b. The Effect of Surface Materials , Bauphysik, 4: 107-110 .

Becker, R. and Puterman, M. (2002). Patterned Mold Growth on Rendered Facades in Israel - A Consequence of Substrate Thermal insulation , In: Proceedings of the 6th Symposium on Building Physics in the Nordic Countries, pp. 667-674 , June 2002, Trondheim, Norway.

Becker, R., Puterman, M. and Laks, J. (1986). The Effect of Porosity of Emulsion Paints on Mould Growth , Durability of Building Materials, 3: 369-380 .

Hagentoft, C. E. (2001). Introduction to Building Physics, Studentlitteratur, Lund .

Hens, H. (1991). Condensation and Energy, Catalogue of Material Properties, Volume 3. International Energy Agency (IEA) , Energy Conservation in Building and Community Systems, IEA-ANNEX XIV.

10.

Hunter, C. A. (1998). Resistance of Masonry Paints to Microbial Attack, BRE-Building Research Establishment, Garston, UK Publication CI/SfB v(L64).

11.

Katsman, R. and Becker, R. (2000). Model for Moisture-Content Evolution in Porous Building Elements With Hygro-thermal Bridges and Air-voids , Journal of Thermal Envelope and Building Science, 24(1): 10-41 .

12.

Kumar Kumaran, M. (1996). Heat, Air and Moisture Transfer in Insulated Envelope Parts, Task 3: Material Properties, International Energy Agency (IEA), Energy Conservation in Building and Community Systems, Final Report, Volume 3, IEA Annex XXIV.

13.

Military Standard MIL-STD 810C (1975). Environmental Test Methods and Engineering Guidelines, Method 508.1: Fungus.

14.

Rubin, S., Settler, I., Manes, A., Braginsky, L. and Ianetz, A. (1998). Typical Meteorological Year Data Base for Energy Computations in Buildings, State of Israel, Ministry of Transport, Israel Meteorological Service, Division of Climatology. Ministry of National Infrastructures, Division of Research & Development, Beit Dagan, Israel .