Protection of laboratorians and their immediate environment from hazardous research
materials (primary containment) requires meticulous preparation and execution of
appropriate protocols and practice. Just as important is paying attention to detail in the
selection, installation, proper use, maintenance and certification of proper operation of
safety equipment. In order to accomplish this a basic understanding is necessary of
primary containment equipment and its performance. This chapter deals with primary
containment, Biological Safety Cabinets, suit rooms, glove boxes and the certification and
proper use of these types of primary containment equipment.
References
1.
AbrahamG., Le Blanc SmithP.
M. & NguyenS.The Effectiveness of Gaseous Formaldehyde Decontamination Assessed by
Biological Monitoring. Journal of the American Biological Safety
Association, American Biological Safety Association. 1997. 2:30–38.
2.
BarkleyW.
E.Evaluation and Development of Controlled Airflow Systems for Environmental
Safety in Biomedical Research. Ph.D. Thesis. Minneapolis, MN.University of Minnesota.1972.
3.
British Standards Institution.
Specifications for microbiological safety cabinets. Brit. Std.
5726. London.British Standards Institution.1979.
4.
ChatignyM.
A. & ClingerD.
I.Contamination Control in Aerobiology. In: An
Introduction to Experimental Aerobiology. Edited by DimmickR.
L., AkersA. B.. New York, NY. John Wiley & Sons,
Inc.1969.
5.
ClarkR. P., OsborneJ. R., PressyD. C., GroverF., KeddieJ. R. & ThomasC.Open Fronted Cabinets in Ventilated Laboratories. J. Appl. Bacteriol. 1990. 69:338–358.
6.
CoriellL.
L. & McGarrityG.
J.Biohazard Hood to Prevent Infection During Microbiological
Procedures. Applied Microbiology. 1968. 16:1895–1900.
7.
FinkR., LibermanD. F., MurphyK., LupoD. & IsraeliE.Biological Safety Cabinets, Decontamination or Sterilization with
Paraformaldehyde. Am. Ind. Hyg. J. 1988. 49:277–279.
8.
FirstM.
W.HEPA Filters. Journal of the American Biological
Safety Association, American Biological Safety Association. 1998. 3:33–42.
9.
FlemingD. O., RichardsonJ. H., TulisJ. J. & VesleyD., eds. Laboratory Safety, Principles and Practices. 2nd
Ed. Washington, DC.ASM Press.1995.
10.
JonesR.
L.Jr., StuartD. G., EaglesonD., GreenierT. J., EaglesonJ.
M.Jr.The Effects of Changing Intake and Supply Air Flow on Biological Safety
Cabinet Performance. Appl. Occup. Environ. Hyg., 1990. 5:370–376.
11.
KuehneR. W., ChatignyM. A., StainbrookB. W., RunkleR. S. & StuartD.
G.Primary Barriers and Personal Protective Equipment in Biomedical
Laboratories. In: Laboratory Safety, Principles and
Practices. 2nd Ed. Edited by FlemingD.
O., RichardsonJ. H., TulisJ. J. & VesleyD.. Washington, DC.ASM Press.1995.
McDadeJ. J., SabelF. L., AkersR. L. & WalkerR.
J.Microbiological Studies on Performance of a Laminar Flow Biological
Cabinet. Appl. Microbiol. 1968. 1080–1092.
14.
National Cancer Institute. National Cancer Institute Safety Standards for Research Involving Chemical
Carcinogens. Bethesda, MD. Office of Research Safety. DHEW
Publication No. (NIH)76–900. 1975.
15.
National Cancer Institute. General Purpose Clean Air Biological Safety Cabinet (Class II Type 2
Safety Cabinet). NCI Specification. Bethesda, MD. U.S. Department of Health,
Education and Welfare. 1976.
16.
National Cancer Institute Office of Research
Safety and the Special Committee of Safety and Health Experts. Laboratory Safety Monograph, A Supplement to the
NIH Guidelines for Recombinant DNA Research. Bethesda,
MD.NIH.1979.
17.
National Institutes of Health. Class II, Type 1 Safety Cabinet. Specification No. NIH-03–112C. Bethesda, MD. U.S. Department of Health,
Education and Welfare. 1974.
18.
NSF International. Class II (Laminar Flow) Biohazard Cabinetry. Standard 49. Ann Arbor, MI.NSF International.1992.
19.
RakeB. W.Influence of Crossdrafts on the Performance of a Biological Safety
Cabinet. Appl. and Environ. Microbiol. 1978. 36:278–283.
20.
RichmondJ.
Y. & McKinneyR.
W., eds. Biosafety in Microbiological and
Biomedical Laboratories. 3rd Ed. Washington,
DC.U.S. Department of Health and Human Services. Public Health Service.
Centers for Disease Control and Prevention and National institutes of Health. U.S.
Government Printing Office.1993.
21.
RichmondJ.
Y. & McKinneyR.
W., eds. Primary Containment for Biohazards:
Selection, Installation and Use of Biological Safety Cabinets. Washington, DC.U.S. Department of Health and Human Services. Public Health Service.
Centers for Disease Control and Prevention and National institutes of Health. U.S.
Government Printing Office.1995.
22.
SenourW.
H.Low speed production vial filling of a potent/hazardous sterile compound in
a negative pressure containment isolator: a case study. In: ISPE
Proceedings of Barrier Isolation Technology Conference. Rockville, MD. June 1–3, 1997.
23.
StimfelT.
M. & GersheyE.
L.Design Modifications of a Class II Biological Safety Cabinet and User
Guidelines for Enhancing Safety. Am. Ind. Hyg. Assoc.
J. 1991, 52:1–5.
24.
StuartD. G., FirstM. W., JonesR.
L.Jr., EaglesonJ.
M.Jr.Comparison of chemical vapor handling by three types of Class II Biological
Safety Cabinets. Particulate and Microbial Control. 1983. 2:18–24.
25.
WagnerC.
M. & AkersJ.
E., eds. Isolator Technology. Buffalo Grove, IL. Interpharm Press,
Inc.1995.
