Abstract
Beckman Coulter
Kaluza 1.2 Flow Cytometry Software
This enhanced version of Kaluza software offers a quick and simple interface with radial menus and the ability to see animated data in multiple dimensions. Millions of cells can be analyzed in an instant through the simultaneous use of hundreds of graphic processors, delivering fast processing speed. With a minimum number of clicks, users can generate a compensation matrix from a set of controls, choose from a variety of algorithms to generate the matrix, and export the compensated data as a CSV file. Batch analysis capability enables processing of multiple files automatically with minimal input.
Kaluza 1.2 also uses gates on the Radar Plot so users can classify events and gate in n-dimensions. To understand the gating strategy, users can browse through its Gate Table, which displays the entire gating hierarchy using Excel-like functions right inside Kaluza reports. The Comparison Plot enables creation of a snapshot to compare statistics across multiple data sets with as few as two clicks.
More: www.kaluzasoftware.com
GE Healthcare
MicroCal VP-Capillary Differential Scanning Calorimetry (DSC) Software
According to GE, this analytical system enables early characterization of the stability of molecules in solution, providing critical information in protein engineering, from preformulation and process development to the formulation of the final biopharmaceutical product. The new software minimizes the data analysis bottleneck and simplifies experiment design and setup. By providing a single, intuitive graphical user interface for selecting and entering all sample and experiment run parameters, assay development time is kept to a minimum. The software also streamlines the workflow, allowing flexible instrument scheduling, whereas the automated data-sorting and -analysis capabilities can reduce the time required for analysis of a typical experiment from days to hours. The software is available with all new MicroCal VP-Capillary DSC systems and as an upgrade for current users. MicroCal Manual Capillary DSC is also available without an autosampler for applications in which higher throughput and unattended operation and sample handling are not required.
More: www.microcal.com
Integra
VIALINK Pipette Management Tool
INTEGRA’s new VIALINK pipette management tool allows users to create and manage custom programs, maintain a service history, and transfer firmware upgrade details between VIAFLO electronic pipettes and a PC. Pipetting protocols can be set up as custom programs with VIALINK and then copied onto VIAFLO pipettes. Users can create a program library that can hold an unlimited number of pipetting protocols. Up to 20 custom programs can then be stored on the pipette itself. Service information, such as date of last calibration or service, can be stored on the pipettes and cannot be deleted afterward, thereby guaranteeing an authentic service history. As INTEGRA releases new firmware upgrades for its electronic pipetting products, VIALINK will enable users to rapidly implement the upgrades on their VIAFLO pipettes. To use VIALINK, VIAFLO single- and multi-channel electronic pipettes require a programming stand that functions as a connector to a PC and serves as a charging stand. To use VIALINK with the VIAFLO 96, only a standard USB cable is required. VIALINK can be downloaded from the INTEGRA Web site.
Mettler Toledo
Calibry 5.0 Pipette Calibration Software
Now compatible with RFID-enabled RAININ pipettes, Calibry 5.0 enables the tracking of pipettes and the monitoring of recalibration dates. Simplified calibration processes allow pipette accuracy to be easily monitored through regular testing. Calibration dates and other identifying information can be written directly to RFID-enabled RAININ pipettes. Calibry can instantly read the serial numbers on pipettes by means of an RFID scanner, speeding up the calibration process for both single- and multi-channel pipettes. Comprehensive pipette information can be accessed via the newly developed Quick Access window. It is easy to check the recalibration dates for individual pipettes, and the calibration method can be started directly from the window. Calibry automatically adds pipettes to the calibration task list as recalibration dates approach and provides step-by-step guidance through the calibration process. Data are recorded automatically.
Olympus
TissuemorphDP Cell Analysis Software Module
TissuemorphDP image analysis software is specifically designed for detection and/or classification of cell nuclei, cytoplasm, or membrane. Preset protocols enable users to load samples and run complex analyses with the touch of just a few keys. Designed by Visiopharm, TissuemorphDP allows users to control detection of cell structures through simple manual control of sensitivity (positive/negative nuclei and membrane) and/or size (positive/negative nuclei and cytoplasm). Users can customize thresholds for positivity for cell nuclei. Research findings are stored electronically as user-defined protocols that can be loaded and executed easily by any authorized operator.
Poplar Solutions
Labcore SDMS
According to Poplar Solutions, this new version of its Labcore Scientific Data Management System makes the capture, review, and approval of analytical data and the creation of all data package types easier. The system includes improvements to the user interface and now enables the review of laboratory data and documents, including entire analytical runs, with simple key strokes and review tools that can improve the speed of data package assembly and management.
More: www.lab-core.com
Tecan
Buffer Creation Wizard
According to Tecan, its new Buffer Creation Wizard fully automates buffer preparation for bioprocessing on Freedom EVO liquid-handling systems. It allows preparation of buffer sets in plates or tubes for subsequent screening experiments, such as high-throughput process development. Fast, reliable buffer preparation can be performed using either manual buffer layouts or design-of-experiment– generated formats (*.txt), including Modde (Umetrics) and Assist (GE Healthcare). The required volumes of each solution are calculated and a ready-to-run script generated with just a few clicks of the mouse.
Thermo Fisher Scientific
LOCaMotion Robot Teaching Software
LOCaMotion Software, for use with Thermo Scientific Orbitor and Orbitor BenchTrak plate movers, can teach an Orbitor BenchTrak to perform a workflow. According to Thermo, this process is normally considered difficult and time-consuming and often requires the expertise of an automation technician. With LOCaMotion robot teaching software, however, users are guided through the process of identifying the location of instrument nests and plate storage devices.
LOCaMotion software now comes standard with all Orbitor plate movers, featuring an interactive graphical interface that guides users through a step-by-step teaching process. The software provides instructions on how to manually move the robotic arm while simultaneously calculating safe locations for the mover and ideal paths to other instruments or storage devices. LOCaMotion software is single-touch operable, so it can be used through a remote desktop connection to a tablet computer for greatest user convenience.
Momentum 3 Automation Control and Scheduling Software
According to Thermo, this new version of its Momentum 3 software enables multiple users to operate continuously and features a new work list functionality that, coupled with data tools and decision logic, makes it ideal for assay plate production, closed-loop screening, hit confirmation, and other automated screening workflows. The graphically driven software effectively integrates and controls complete processes to provide walk-away functionality.
Momentum 3 users can define, execute, and monitor complex processes in a powerful yet easy-to-use visual environment. The Lab Creator design environment allows users to manage multiple system layouts on the go; add instruments from the large, growing library; or reconfigure available assets as needs change. The work list–driven interface allows users to easily load and unload multiple batches while managing a continuous queue of campaigns. In addition, the new storage and device pooling features facilitate the grouping of multiple storage units and the dynamic execution of operations across a set of devices, based on availability and priority, for an efficient use of automation. Momentum 3 software supports more than 100 device drivers and has the ability to import/export topologies and processes as well as view past runs and edit processes in real-time.
Two Fold Software
Stability Trials LIMS Software
This user-friendly Stability Trials software module is now available as part of the version 1.1 release of Qualoupe LIMS software. The new Stability Trials software is tailored for organizations that run stability trials over any given period of time and different storage conditions. Users can create protocols for parameters such as sampling regimens, detailing storage conditions, sampling frequency, and time units. When running a trial, users can select the protocol that would then create the scheduled samples for the trial. The material being trialled would associate the methods to be performed on the samples. Trials can be associated with studies and projects. The Stability Trials software also enables the LIMS to provide prompts for sample pull schedules and the storage location.
The Stability Trial software is one of a trio of new modules now available as part of Qualoupe’s new version 1.1 LIMS software release. The other modules provide enhanced solutions for managing consumable stock control and providing a multi-group capability for complete data management flexibility for organizations and companies that not only have multiple sites but also include multiple laboratories within each site.
More: www.twofold-software.com
About the JBS Product Focus Column
E-mail news releases for consideration to