The paper is concerned with the derivation of asymptotically consistent equations governing the long-wave flexural response of a two-layered rectangular plate with high-contrast elastic properties. In the general case, the plate is under dynamic and variable surface, volume, and edge forces. Performing the asymptotic integration of the three-dimensional (3D) elasticity equations in the transverse direction and satisfying boundary conditions on the faces and interface, we derived the sequence of two-dimensional (2D) differential equations with respect to required functions in the first two approximations. The eight independent restraints for the generalized displacements and stress resultants are considered to formulate the 16 independent variants of boundary conditions. One of the main results of the paper is the Timoshenko–Reissner type equation capturing the effect of the softer layer and taking into account the in-plane deformation induced by the edge forces. Comparative calculations of natural frequencies were carried out based on our and alternative models.
IvanovI.Analysis, modelling, and optimization of laminated glasses as plane beam. Int J Solids Struct2006; 43(22–23): 6887–6907.
2.
DaviesJ.Lightweight sandwich construction. New York: Wiley, 2008.
3.
RionJLeterrierYMånsonJAE, et al. Ultra-light asymmetric photovoltaic sandwich structures. Compos A Appl Sci Manuf2009; 40(8): 1167–1173.
4.
SchulzeSPanderMNaumenkoK, et al. Analysis of laminated glass beams for photovoltaic applications. Int J Solids Struct2012; 49(15): 2027–2036.
5.
NjugunaJ.Lightweight composite structures in transport: design, manufacturing, analysis and performance. Sawston: Woodhead Publishing, 2016.
6.
UlizioMLampmanDRustagiM, et al. Practical design considerations for lightweight windshield applications. SAE Int J Transp Saf2017; 5(1): 47–57.
7.
WepsMNaumenkoKAltenbachH.Unsymmetric three-layer laminate with soft core for photovoltaic modules. Compos Struct2013; 105: 332–339.
8.
AßmusMNaumenkoKAltenbachH.A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules. Compos Struct2016; 158: 340–358.
9.
AßmusMNordmannJNaumenkoK, et al. A homogeneous substitute material for the core layer of photovoltaic composite structures. Compos B Eng2017; 112: 353–372.
10.
LeePChangN.Harmonic waves in elastic sandwich plates. J Elast1979; 9(1): 51–69.
11.
CarreraE.Historical review of zig-zag theories for multilayered plates and shells. Appl Mech Rev2003; 56(3): 287–308.
12.
NaumenkoKEremeyevV.A layer-wise theory for laminated glass and photovoltaic panels. Compos Struct2014; 112: 283–291.
13.
SayyadASGhugalYM.On the free vibration analysis of laminated composite and sandwich plates: a review of recent literature with some numerical results. Compos Struct2015; 129: 177–201.
14.
EisenträgerJNaumenkoKAltenbachH, et al. Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels. Int J Mech Sci2015; 96: 163–171.
15.
AltenbachHEremeyevVANaumenkoK.On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer. Z Angew Math Mech2015; 95(10): 1004–1011.
16.
MikhasevGAltenbachH. Equivalent single layer model for thin laminated cylindrical shells. In: MikhasevGIAltenbachH (eds) Thin-walled laminated structures (Advanced structured materials). Vol. 106. Cham: Springer, 2019, pp. 29–84.
17.
BarrosoVSAndradeAProvidênciaP, et al. A von Kármán-type model for two-layer laminated glass plates, with applications to buckling and free vibration under in-plane edge loads. Compos Struct2023; 322: 117287.
18.
MorozovNFBelyaevAKTovstikPE, et al. Applicability ranges for four approaches to determination of bending stiffness of multilayer plates. Continuum Mech Thermodyn2021; 33: 1659–1673.
19.
BerdichevskyVL.An asymptotic theory of sandwich plates. Int J Eng Sci2010; 48: 383–404.
20.
VivergeKBoutinCSalletF.Model of highly contrasted plates versus experiments on laminated glass. Int J Solids Struct2016; 102–103: 238–258.
21.
BoutinCVivergeK.Generalized plate model for highly contrasted laminates. Eur J Mech A Solids2016; 55: 149–166.
22.
BoutinC.High-contrast multi-layered plates. Statics, dynamics and buckling. In: AltenbachHPrikazchikovDNobiliA (eds) Mechanics of high-contrast elastic solids (Advanced structured materials). Vol. 187, Cham: Springer, 2023, pp. 39–63.
23.
TovstikPETovstikTP.Generalized Timoshenko-Reissner models for beams and plates, strongly heterogeneous in the thickness direction. ZAMM Z fur Angew Math Mech2017; 97(3): 296–308.
24.
TovstikPE.Two-dimensional model of second-order accuracy for an anisotropic plate. Vestnik St. Petersb Univ Math2019; 52: 112–121.
25.
KaplunovJErbaşBEgeN.Asymptotic derivation of 2D dynamic equations of motion for transversely inhomogeneous elastic plates. Int J Eng Sci2022; 178: 103723.
26.
FriedrichsKDresslerR.A boundary-layer theory for elastic plates. Commun Pure Appl Math1961; 14(1): 1–33.
27.
Gol’denveizerAL.Theory of thin elastic shells (International series of monograph in aeronautics and astronautics). New York: Pergamon Press, 1961.
28.
Gol’denveizerAL.Construction of approximate theory of shells using asymptotic integration of equations of elasticity theories. Prikl Mat Mekh1962; 26(4): 668–686.
29.
GoldenveizerALKaplunovJDNoldeEV.On Timoshenko-Reissner type theories of plates and shells. Int J Solids Struct1993; 30(5): 675–694.
30.
GreenAE.On the linear theory of thin elastic shells. Proc R Soc London Ser A1962; 266(1325): 143–160.
AghalovyanLA.Asymptotic theory of anisotropic plates and shells. Singapore: World Scientific, 2015.
33.
MikhasevGLeN. Asymptotically correct analytical model for flexural response of a two-layer strip with contrast elastic constants. In: AltenbachHBerezovskiAdell’IsolaF, et al. (eds) Sixty shades of generalized continua (Advanced structured materials). Vol. 170. Cham: Springer, 2023, pp. 517–540.
34.
MikhasevGBotogovaMLeN.Flexural deformations and vibrations of a three-layer beam-strip with a stiff core and soft skins. In: AltenbachHIrschikHPorubovAV (eds) Progress in continuum mechanics (Advanced structured materials). Vol. 196. Cham: Springer, 2023, pp. 265–282.
35.
KaplunovJPrikazchikovDAPrikazchikovaLA.Dispersion of elastic waves in a strongly inhomogeneous three-layered plate. Int J Solids Struct2017; 113–114: 169–179.
36.
KaplunovJPrikazchikovDPrikazchikovaL.Dispersion of elastic waves in laminated glass. Procedia Eng2017; 199: 1489–1494.
37.
PrikazchikovaLAydinYEErbaşB, et al. Asymptotic analysis of an anti-plane dynamic problem for a three-layered strongly inhomogeneous laminate. Math Mech Solids2020; 25(1): 3–16.
38.
KaplunovJPrikazchikovaLAlkinidriM.Antiplane shear of an asymmetric sandwich plate. Continuum Mech Thermodyn2021; 33: 1247–1262.
39.
PrikazchikovaL.Decay conditions for antiplane shear of a high-contrast multi-layered semi-infinite elastic strip. Symmetry2022; 14: 1697–1699.
40.
KaplunovJPrikazchikovDAPrikazchikovaLA, et al. The lowest vibration spectra of multi-component structures with contrast material properties. J Sound Vib2019; 445: 132–147.
41.
TimoshenkoSP.On the correction for shear of the differential equation for transverse vibrations of prismatic bars. Philos Mag1921; 4(Ser. 6): 242.
42.
ReissnerE.The effect of transverse shear deformation on the bending of elastic plates. Trans ASME J Appl Mech1945; 12: 69–77.
43.
MikhasevG.On governing equations for a nanoplate derived from the 3D gradient theory of elasticity. Math Mech Solids2022; 27(9): 1688–1702.
44.
WildeMVSurovaMYSergeevaNV.Asymptotically correct boundary conditions for the higher-order theory of plate bending. Math Mech Solids2022, 27(9): 1813–1854.
