We discuss a framework for the description of gradient plasticity in isotropic solids based on the Riemannian curvature derived from a metric induced by plastic deformation. This culminates in a flow rule in the form of a fourth-order partial differential equation for the plastic strain rate, in contrast to the second-order flow rules that have been proposed in alternative treatments of gradient plasticity in isotropic solids.
FleckNAMullerGNAshbyMF, et al. Strain gradient plasticity: Theory and experiment. Acta Metall Mater1994; 42: 475–487.
2.
StölkenJSEvansAG.A microbend test method for measuring the plasticity length scale. Acta Mater1998; 46: 5109–5115.
3.
HutchinsonJW.Plasticity at the micron scale. Int J Solids Struct2000; 37: 225–238.
4.
TeodosiuC.A dynamic theory of dislocations and its applications to the theory of the elastic–plastic continuum. In: SimmonsJA, et al. (eds.), Proceedings of Conference on Fundamental Aspects of Dislocation Theory (National Bureaus of Standards Special Publication, 317-2). Washington, DC: National Bureaus of Standards, 1970, pp. 837–876.
5.
AcharyaABassaniJL.Lattice incompatibility and a gradient theory of crystal plasticity. J Mech Phys Solids2000; 48: 1565–1595.
6.
EdmistonJSteigmannDJJohnsonGJBartonN.A model for elastic-viscoplastic deformations of crystalline solids based on material symmetry: theory and plane-strain simulations. Int J Eng Sci2013; 63: 10–22.
7.
KrishnanJSteigmannDJ.A polyconvex framework for isotropic elastoplasticity theory. IMA J Appl Math2014; 79: 722–738.
8.
SteigmannDJ.A primer in plasticity. In: MerodioJOgdenRW (eds.), Constitutive Modelling of Solid Continua ( Solid Mechanics and its Applications, Vol. 262). Basel: Springer, 2020, pp. 125–153.
9.
AifantisEC.The physics of plastic deformation. Int J Plasticity1987; 3: 211–247.
10.
SteinmannP.Views on multiplicative elastoplasticity and the continuum theory of dislocations. Int J Eng Sci1996; 34: 1717–1735.
11.
LeKCStumpfH.A model of elastoplastic bodies with continuously distributed dislocations. Int J Plasticity1996; 12: 6114–6127.
12.
Cleja-TigoiuS.Couple stresses and non-Riemannian plastic connection in finite elasto-plasticity. Z angew Math Phys2002; 53: 996–1013.
13.
AcharyaA.Driving forces and boundary conditions in continuum dislocation mechanics. Proc Roy Soc Lond2003; A459. doi:10.1098/rspa.2002.1095.
GurtinMEAnandL.A theory of strain-gradient plasticity for isotropic, plastically irrotational materials. Part II: Finite deformations. Int J Plasticity2005; 21: 2297–2318.
16.
GurtinMEFriedEAnandL.Mechanics and Thermodynamics of Continua. Cambridge: Cambridge University Press, 2010.
17.
FleckNAWillisJR.Strain gradient plasticity: Energetic or dissipative?Acta Mech Sin2015; 31: 465–472.
18.
McBrideATReddyBDSteinmannP.Dissipation-consistent modelling and classification of extended plasticity formulations. J Mech Phys Solids2018; 119: 118–139.
19.
AroraAAcharyaA.Unification of finite deformation J2 Von-Mises plasticity and quantitative dislocation mechanics. J Mech Phys Solids2020; 143: 104050.
20.
EbobisseFNeffP.A fourth-order gauge-invariant gradient plasticity model for polycrystals based on Kröner’s incompatibility tensor. Math Mech Solids2019; 25: 129–159.
21.
NollW.Materially uniform simple bodies with inhomogeneities. Arch Rat Mech Anal1967; 27: 1–32.
22.
WangC.-C.On the geometric structure of simple bodies, a mathematical foundation for the theory of continuous distributions of dislocations. Arch Rat Mech Anal1967; 27: 33–94.
23.
WangC-C.Mathematical Principles of Mechanics and Electromagnetism, Part A: Analytical and Continuum Mechanics. New York: Plenum Press, 1979.
24.
BloomF.Modern Differential Geometric Techniques in the Theory of Continuous Distributions of Dislocations ( Lecture Notes in Mathematics, Vol. 733). Berlin: Springer, 1979.
25.
EpsteinMElż anowskiM.Material Inhomogeneities and Their Evolution. Berlin: Springer, 2007.
26.
EpsteinM.The Geometrical Language of Continuum Mechanics. Cambridge: Cambridge University Press, 2010.
27.
CermelliPGurtinME.On the characterization of geometrically necessary dislocations in finite plasticity. J Mech Phys Solids2001; 49: 1539–1568.
KondoK.Non-Riemannian geometry of imperfect crystals from a macroscopic viewpoint. In: KondoK (ed.), RAAG Memoirs of the Unifying Study of Basic Problems in Engineering Sciences by Means of Geometry, Vol. 1. Tokyo: Gakujutsu Bunken Fukyu-Kai, 1955.
32.
BilbyBABulloughRSmithE.Continuous distributions of dislocations: a new application of the methods of non-Riemannian geometry. Proc Roy Soc Lond1955; A231: 263–273.
33.
KrönerE.Allgemeine kontinuumstheorie der versetzungen und eigenspannungen. Arch Rat Mech Anal1960; 4: 273–334.
34.
Di CarloAQuiligottiS. Growth and balance. Mech Res Comm2002; 29: 449–456.
35.
PragerW.Introduction to Mechanics of Continua. Boston, MA: Ginn, 1961.
36.
PerzynaP.The constitutive equations for rate-sensitive plastic materials. Quart Appl Math 1962/63; 20: 321–332.
37.
SadikSYavariA.On the origins of the idea of the multiplicative decomposition of the deformation gradient. Math Mech Solids2015; 22: 771–772.
38.
YavariAGorielyA.Riemann–Cartan geometry of nonlinear disclination mechanics. Math Mech Solids2013; 18: 91–102.
39.
NollW.A mathematical theory of the mechanical behavior of continuous media. Arch Rat Mech Anal1958; 2: 197–226.
40.
ColemanBDNollW.Material symmetry and thermostatic inequalities in finite elastic deformations. Arch Rat Mech Anal1964; 15: 87–111.
41.
GurtinME.An Introduction to Continuum Mechanics. New York: Academic Press, 1981.
42.
WeitzenböckR.Invariantentheorie. Groningen, 1923.
43.
GolabS.Tensor Calculus. New York: Elsevier, 1974.
44.
FlandersH.Differential Forms With Applications to the Physical Sciences. New York: Dover, 1989.
45.
SteigmannDJ.Remarks on 2nd grade elasticity in plastically deformed crystals. Mech Res Comm2020; 105: 103517.
46.
CiarletPG.An Introduction to Differential Geometry With Applications to Elasticity. Dordrecht: Springer, 2005.
47.
FlüggeW.Tensor Analysis and Continuum Mechanics. Berlin: Springer, 1972.
48.
BergmannPG.Introduction to the Theory of Relativity. New York: Prentice-Hall, 1948.
49.
WaldRM.General Relativity. Chicago, IL: University of Chicago Press, 1984.
50.
DerezinSZubovLM.Disclinations in nonlinear elasticity. Z angew Math Mech2011; 91: 433–442.
51.
BöhmerCGLeeY.Compatibility conditions of continua using Riemann–Cartan geometry. Math Mech Solids2021; 26: 513–529.
52.
WangC-CBloomF.Material uniformity and inhomogeneity in anelastic bodies. Arch Rat Mech Anal1974; 53: 246–276.
53.
KrönerE. Interrelations between various branches of continuum mechanics. In: KrönerE (ed.), Proceedings of the IUTAM Symposium on Mechanics of Generalized Continua. New York: Springer, 1968, pp. 330–340.
54.
MünchINeffP.Rotational invariance conditions in elasticity, gradient elasticity and its connection to isotropy. Math Mech Solids2018; 23: 3–42.
