A lower bound of the longitudinal elastic modulus of polymer composite materials reinforced with unidirectional continuous fibres is obtained by means of a Differential Calculus approach. In the mathematical derivations, the concept of interphase between the fibre and matrix was also taken into consideration. The three phases are considered as isotropic. The results obtained from the proposed formula were compared with those arising from some reliable and accurate theoretical models as well as with experimental data found in the literature, and a reasonable agreement was observed.
AdamsDFTsaiSW.The influence of random filament packing on the transverse stiffness of unidirectional composites. J Comp Mater1969; 3: 368–381.
6.
HersheyAV.The elasticity of an isotropic aggregate of anisotropic cubic crystals. J Appl Mech1954; 21: 236–240.
7.
KrönerE.Berechnung der elastischen konstanten des vielkristalls aus den konstanten des einkristalls. Z Phys1958; 151: 504–518.
8.
HermansJJ.The elastic properties of fiber reinforced materials when the fibers are aligned. Proc Koninklijke Nederlandse Akademie van Wetenschappen Ser B1967; 70: 1-9.
KernerEH.The elastic and thermo-elastic properties of composite media. Proc Phys Soc B1956; 69: 808–813.
11.
TsaiSE.Structural behaviour of composite materials. Series NASA-CR-71. United States National Aeronautics and Space Administration, 1964.
12.
HalpinJCTsaiSW. Environmental factors in composite materials. Technical Report AFML-TR. United State Air Force Materials Laboratory, 1969, 67-423.
13.
PapanicolaouGCPaipetisSATheocarisPS.The concept of boundary interphase in composite mechanics. Kolloid Zeit Zeit fur Polymere1978; 256: 625-630.
14.
TheocarisPSPapanicolaouGC.The effect of the boundary interphase on the thermomechanical behaviour of composites reinforced with short fibers. J Fibre Sci Tech1979; 12: 421-433.
15.
TheocarisPSSideridisEPPapanicolaouGC.The elastic longitudinal modulus and Poisson’s ratio of fiber composites. J Reinf Plast Comp1985; 4: 396-418.
16.
SideridisE.The transverse elastic modulus of fibre-reinforced composites as defined by the concept of the interphase. J Appl Polym Sci1993; 48: 243-255.
17.
TheocarisPS.The unfolding model for the representation of the mesophase layer in composites. J Appl Polym Sci1985; 30: 621–645.
18.
SwainREReifsniderKLJayaramanKet al. Interface/ interphase concepts in composite material systems. J Thermoplast Compos Mater1990; 3: 13–23.
19.
ClementsLLMooreRL.Composite properties for e-glass fibers in a room temperature curable epoxy matrix. Composites1978; 1: 93-99.
20.
SideridisE.PapadopoulosGAKyriaziE.Strength of materials and elasticity approach to stiffness of fibrous composites using the concept of interphase. J Appl Polym Sci 2005; 95: 1578.
21.
TheocarisPS.The mesophase concept in composites, polymers – properties and applications. Volume 11. Springer, Berlin, 1987.
22.
CherkaevAVLurieKAMiltonGW.Invariant properties of the stress in plane elasticity and equivalence classes of composites. Proc R Soc London A1992; 438: 519–529.
23.
SottosNRMcCulloughRL.The influence of interphase regions on local thermal displacements in composites. Composites Sci Tech1993; 44: 319–333.
24.
VeazieDRQuJ.Effects of interphases on the transverse stress-strain behavior in unidirectional fiber reinforced metal matrix compositesCompos Eng1995; 5: 597-610.
25.
Alemi-ArdakaniMMilaniASYannacopoulosS.On complexities of impact simulation of fiber reinforced polymer composites: a simplified modeling framework. Sci World J2014; Article ID 382525: 10 pages.
26.
HuangHTalrejaR.Effects of void geometry on elastic properties of unidirectional fiber reinforced composites. Comp Sci Tech2005; 65: 1964-1981.
27.
ChiangCR.Computation of the bounds on the elastic moduli of a fiber-reinforced composite by Monte Carlo simulations. Acta Mech2011; 217: 257–267.
28.
MalignoARWarriorNALongAC.Effects of interphase material properties in unidirectional fibre reinforced composites. Comp Sci Tech2010; 70: 36–44.
29.
WangXZhangJWangZet al. Effects of interphase properties in unidirectional fiber reinforced composite materialsMater Des2011; 32: 3486–3492.
30.
TsaiS.W., Mechanics of Composite Materials, Part II Theoretical Aspects, Air Force Material Laboratory. Technical Report, AFML-TR-66-149, 1966.
31.
LipatovYS.Physical chemistry of filled polymers. Originally published “Khimiya”. Translated from Russian by Moseley RJ, Monograph No. 2. Moscow: International Polymer Science and Technology, 1977.
32.
FieldMichael J., Differential Calculus and Its Applications, Dover Publications, Inc, 1st ed. Mineola, New York, 1976.
