The phenomenological theory of elastic—plastic response is reconsidered in the light of recent opinion regarding the constitutive character of the constituent elastic and plastic deformations. The primary role of dissipation in the physics of plastic evolution is emphasized and shown to lead to the clarification of a number of open questions. Particular attention is given to the invariance properties of the elastic and plastic deformations, to the kinematics of discontinuities, and to the role of material symmetry in restricting constitutive equations for elastic response, yield and plastic evolution.
Cleja-Tigoiu, S. and Soos, E.Elastoviscoplastic models with relaxed configurations and internal variables. Applied Mechanics Review, 43, 131 (1990).
2.
Epstein, M. and Maugin, G.The energy-momentum tensor and material uniformity in finite elasticity . Acta Mechanica, 83 (1990) 127.
3.
Epstein, M. and Maugin, G.On the geometrical material structure of anelasticity. Acta Mechanica, 115 (1996) 119.
4.
Rajagopal, K. and Srinivasa, A.Inelastic behaviour of materials. Part I: theoretical underpinnings. International Journal of Plasticity14, 945 (1998).
5.
Rajagopal, K. and Srinivasa, A.On the role of the Eshelby energy-momentum tensor in materials with multiple natural configurations. Mathematics andMechanics of Solids, 10, 3 (2005).
Epstein, M.Toward a complete second order evolution law. Mathematics and Mechanics of Solids, 4, 251 (1999).
8.
Chadwick, P.Continuum Mechanics: Concise Theory and Problems, Dover , New York, 1999.
9.
Truesdell, C. and Noll, W.The Nonlinear Field Theories of Mechanics, Vol. III/3 of S. Flügge's Handbuch der Physik, Springer , Berlin, 1965.
10.
Gurtin, M.E.An Introduction to Continuum Mechanics, Academic, Orlando, FL, 1981.
11.
Eckart, C.The thermodynamics of irreversible processes. IV: The theory of elasticity and anelasticity. Physics Review , 73, 373 (1948).
12.
Kondo, K.Non-Riemannian geometry of imperfect crystals from a macroscopic viewpoint, Volume 1 of RAAG Memoirs of the Unifying Study of Basic Problems in Engineering and Physical Science by Means of Geometry, K. Kondo (Ed.), Gakujutsu Bunken Fukyu-Kai, Tokyo, 1955.
13.
Bilby, B.A. , Bullough, R. and Smith, E.Continuous distributions of dislocations: a new application of the methods of non-Riemannian geometry . Proceedings of the Royal Society of London, A231, 263 (1955).
14.
Kröner, E.Continuum theory of defects. In: Les Houches, Session 35, 1980—Physique des defauts, R. Balian , et al. (Eds.), North-Holland, New York, 1981, pp. 215—315.
15.
Noll, W.Materially uniform simple bodies with inhomogeneities. Archives for Rational and MechanicalAnalysis, 1, 27 (1967).
16.
Wang, C.-C.On the geometric structures of simple bodies, a mathematical foundation for the theory of continuous distribution of dislocations. Archives for Rational and MechanicalAnalysis, 27, 33 (1967).
17.
Lardner, R.W.Mathematical Theory of Dislocations and Fracture , University of Toronto Press, Toronto, 1974.
18.
Teodosiu, C.Elastic Models of Crystal Defects, Springer, Berlin, 1984.
19.
Kosevich, A.M.Dynamical theory of dislocations. Soviet Physics, 7, 837 (1965).
20.
Ericksen, J.L.Special topics in elastostatics. Advances in Applied Mechanics, 17, 189 (1977).
21.
Hill, R.Aspects of invariance in solid mechanics. Advances in Applied Mechanics, 18, 1 (1978).
22.
Pitteri, M.Reconciliation of local and global symmetries of crystals. Journal of Elasticity, 14, 175 (1984).
23.
Noll, W.A mathematical theory of the mechanical behavior of continuous media. Archives for Rational and MechanicalAnalysis, 2, 197 (1958).
24.
Noll, W.A new mathematical theory of simple materials. Archives for Rational and MechanicalAnalysis, 48, 1 (1972).
25.
Ball, J.M. and James, R.D.Proposed experimental tests of a theory of fine microstructure and the two-well problem. Philosophical Transactions of the Royal Society of London, A338, 389 (1992)
26.
Cermelli, P. and Gurtin, M.E.On the characterization of geometrically necessary dislocations in finite plasticity. Journal of Mechanics and Physics of Solids, 49, 1539 (2001).
27.
Fosdick, R. and Royer-Carfagni , G.A Stokes theorem for second-order tensor fields and its implications in continuum mechanics. International Journal of Non-Linear Mechanics, 40, 381 (2005).
28.
Hay, G.E.Vector and Tensor Analysis, Dover, New York, 1953.
29.
Bilby, B.A.Types of dislocation source. In: Report of Bristol Conference on Defects in Crystalline Solids, (Bristol1954) The Physical Society, London , 1955, pp. 124—133.
30.
Olson, G.B. and Cohen, M.Interphase-boundary dislocations and the concept of coherency. Acta Metallica, 27, 1907 (1979 ).
31.
Basson, F. and Driver, J.H.Modelling the evolution of geometrically necessary boundaries at large plastic strains. Materials Science and Engineering, A256, 243 (1998).
32.
Cermelli, P. and Sellers, S.Multi-phase equilibrium of crystalline solids . Journal of Mechanics and Physics of Solids, 48, 765 (2000).
33.
Truesdell, C. and Toupin, R.The classical f ield theories, Vol. III/1 of S. Flügge's Handbuch der Physik, Springer , Berlin, 1960, pp. 226—793.
34.
Eshelby, J.D.Energy relations and the energy-momentum tensor in continuum mechanics. In: Inelastic Behavior of Solids, M. Kanninen, W. Adler , A. Rosenfeld and R. Jaffe (Eds.), McGraw-Hill, New York, 1970, pp. 77—115.
35.
Maugin, G.A.Eshelby stress in elastoplasticity and ductile fracture. International Journal of Plasticity, 10, 393 (1994).
36.
Le K.C. and Stumpf, H.Constitutive equations for elastoplastic bodies at finite strain: thermodynamic implementation. Acta Mechanica, 100, 155 (1993 ).
37.
Le K.C. and Stumpf, H.Nonlinear continuum theory of dislocations. International Journal of Engineering Science, 34, 339 (1996).
38.
Mandel, J.Equations constitutives et directeurs dans les milieux plastiques . International Journal of Solids and Structures, 9, 725 (1973).
39.
Naghdi P.M. and Srinivasa, A.R.A dynamical theory of structured solids: I. Basic development. Philosophical Transactions of the Royal Society of London, A345, 425 (1993).
40.
Lubliner, J.Plasticity Theory, Macmillan , New York, 1990.
41.
Cohen, H. and Epstein, M.Remarks on uniformity in hyperelastic materials . International Journal of Solids and Structures , 20, 233 (1984).
42.
Green, A.E. and Adkins, J.E.Large Elastic Deformations, Oxford University Press , Oxford, 2nd edition, 1970.
43.
Taylor, G.I.The mechanism of plastic deformation of crystals. Part I: Theoretical. Proceedings of the Royal Society of London , A145, 326 (1934).
44.
Kuhlmann-Wilsdorf, D.Theory of plastic deformation: properties of low energy dislocation structures. Materials Science and Engineering, 113A, 1 (1989).
45.
Beaudoin, A. and Acharya, A.A model for rate-independent flow of metal polycrystals based on the slip plane lattice incompatibility. Materials Science and Engineering, A309-310, 411 (2001).
46.
Cleja-Tigoiu, S.Models in multiplicative finite elasto-plasticity . In: Geometry, Continua and Microstructure, G. Maugin (Ed.), Hermann, Paris, 1999, pp. 75—85.
47.
Zheng, Q.-S.Theory of representations for tensors: a unified invariant approach to constitutive equations. Applied Mechanics Review, 47, 545 (1994).
48.
Epstein, M.Self-driven continuous dislocations and growth, In: Mechanics of Material Forces, P. Steinmann and G. A. Maugin (Eds.) Springer, Berlin, 2005 , pp. 129—139.
49.
Cazacu, O. and Barlat, F.Application of the theory of representation to describe yielding of anisotropic aluminum alloys. International Journal of Engineering Science, 41, 1367 (2003).
50.
Willis, J.R.Second-order effects of dislocations in anisotropic crystals. International Journal of Engineering Science, 5, 171 (1967).
51.
Rajagopal, K.R. and Wineman, A.S.On a constitutive theory for materials undergoing microstructural changes. Archives of Mechanics, 42, 53 (1990).
52.
Rajagopal, K.R. and Wineman, A.S.A constitutive equation for non-linear elastic materials which undergo deformation-induced microstructural changes . International Journal of Plasticity, 8, 385 (1992).
53.
Gurtin, M.E. and Anand, L.The decomposition F = Fe Fp, material symmetry, and plastic irrotationality for solids that are isotropic—viscoplastic or amorphous. International Journal of Plasticity, 21, 1686 (2005).
