Sage Journals: Discover world-class research

Abstract

In this paper, we consider the problem of a single elastic inhomogeneity embedded within an infinite elastic matrix in anti-plane shear. In particular, we examine the design of this inhomogeneity to achieve (stress) neutrality when a non-uniform stress field is prescribed in the surrounding matrix. Since it is known that neutral elastic inhomogeneities do not exist when the inhomogeneity is assumed to be perfectly bonded to the matrix, the design method presented here is based on the assumption of an imperfect interface and the appropriate choice of the (single) interface parameter (characterizing the imperfect interface) to achieve the desired neutrality. Specifically, in the case of a homogeneously imperfect interface, it is shown that the circular inhomogeneity is neutral if and only if the prescribed non-uniform stress field in the surrounding matrix belongs to a certain class of polynomial functions. In the case of an inhomogeneously imperfect interface, neutrality is established for circular and elliptic inhomogeneities for specific classes of prescribed states of stress in the surrounding matrix. The results in this paper affirm the feasibility of designing a neutral elastic inhomogeneity by controlling the (imperfect) interface parameter describing the inhomogeneity-matrix interface.

Keywords

Neutral elastic inhomogeneity imperfect interface linear elasticity composite mechanics

Get full access to this article

View all access options for this article.

References

[1] Mansfield, E.H. : Neutral holes in plane stress-reinforced holes which are elastically equivalent to the uncut sheet. Q. J. Mech. Appl. Math., VI, 370-378 (1953).

[2] Ru, C.Q. : Interface design of neutral elastic inclusions. Int. J. Solids Struct., 35, 559-572 (1998).

[3] Achenbach, J.D. and Zhu, H. : Effect of interfacial zone on mechanical behaviour and failure of fiber-reinforced composites. J. Mech. Phys. Solids, 37, 381-393 (1989).

[4] Achenbach, J.D. and Zhu, H. : Effect of interphases on micro and macromechanical behaviour of hexagonal-array fiber composites. J. Appl. Mech., 57, 956-963 (1990).

[5] Benveniste, Y. : The effective mechanical behavior of composite materials with imperfect contact between the constituents. Mech. Mater., 4, 197-208 (1984).

[6] Hashin, Z. : Thermoelastic properties of fiber composites with imperfect interface. Mech. Mater., 8, 333-348 (1990).

[7] Hashin, Z. : The spherical inclusion with imperfect interface. J. Appl. Mech., 58, 444-449 (1991).

[8] Jun, S. and Jasiuk, I. : Elastic moduli of two-dimensional composites with sliding inclusions - a comparison of effective medium theories. Int. J. Solid Struct., 30, 2501-2523 (1993).

[9] Pagano, N.J. and Tandon, G.P. : Modeling of imperfect bonding in fiber reinforced brittle matrix. Mech. Mater., 9, 49-64 (1990).

10.

[10] Thorpe, M.F. and Jasiuk, I. : New results in the theory of elasticity for two-dimensional composites. Proc. R. Soc. A, 438, 531-544 (1992).

11.

[11] Ru, C.Q. and Schiavone, P. : A circular inhomogeneity with circumferentially inhomogeneous interface in anti-plane shear. Proc. R. Soc. A, 453, 2551-2572 (1997).

On the Design of Neutral Elastic Inhomogeneities in the Case of Non-Uniform Loading

Abstract

Keywords

Get full access to this article

References