Robust Control of Two-Link Flexible Manipulators Using the μ-Synthesis Technique

Abstract

Two-link robot manipulators are commonly used in industrial sectors such as manufacturing. Some manipulators are often bulky and their power consumption is relatively high. Others, such as the arm on the space shuttle, are driven slowly to prevent the onset of flexible oscillations. The efficiency of these manipulators can be improved by reducing the weight of some of these arms and/or increasing the speed of others. These modifications complicate the dynamic behavior of the system due to the possible onset of low frequency oscillations. This article addresses the issue of modeling and end-point robust control of two-link flexible manipulators using the μ-synthesis technique. The Timoshenko beam theory along with the assumed modes method are used to derive reference equations of motion for the flexible manipulator. Discrepancies between the control design model and the actual dynamics of the manipulator are attributed to neglected nonlinearities such as cross-coupling, which should be included in the controller design. A linear estimation of these errors will be identified and used in the control design to compensate for the unmodeled dynamics of the flexible arm and parameter uncertainties. The μ-synthesis control design techniques are then employed to synthesize controllers for the two-link flexible robot manipulator.

Keywords

Robust control μ-synthesis flexible manipulators

Get full access to this article

View all access options for this article.

References

Balas, G.J. and Doyle, J.C. , 1994, "Robust control of flexible modes in the controller cross-over region,"AIAA, Journal of Guidance, Control, and Dynamics 17(2), 370-377.

Balas, G.J. , Doyle, J.C. , Glover, K. , Packard, A. , and Smith, R. , 1991, "μ analysis and synthesis toolbox," MUSYN and The Mathworks Inc.

Cannon, R.H. and Schmitz, E. , 1984, "Initial experiments on the end-point control of a flexible one-link robot, "International Journal of Robotics Research 3(3), 62-75.

Doyle, J.C. , 1982, "Analysis of feedback systems with structured uncertainties ," in Proceedings of the Institute of Electrical Engineers Part D(129, pp. 242-250.

Feliu, V. , Rattan, K.S. , and Brown, B.H. , 1991, "Design and control of a two-degree-of-freedom lightweight flexible arm," in Proceedings of the 30th IEEE Conference on Decision and Control, pp. 1391-1395.

Hillsley, K.L. and Yorkovich, S. , 1991, "Vibration control of a two-link flexible robot arm," in Proceedings of the 1991 IEEE International Conference on Robotics and Automation, Sacramento, CA, pp. 2121-2126.

Kanoh, H. , 1991, "Distributed parameter models of flexible robot arms," Advanced Robotics 5(1), 87-99.

Karkoub, M. , 1994, "Modelling and control of flexible manipulators: An integrated approach," Ph.D. dissertation, University of Minnesota , USA.

Karkoub, M. , Balas, G.J. , and Tamma, K. , 1997, "Modelling and robust control of single-link flexible manipulators," pending publication in AIAA, Journal of Guidance, Dynamics, and Control.

10.

Matsumo, F. , Sakawa, Y. , and Asano, T. , 1991, "Quasi-static hybrid position/force control of a flexible manipulator," in Proceedings of the 1991 IEEE International Conference on Robotics and Automation, Sacramento, CA, pp. 2838-2843.

11.

Oakley, C.M. and Cannon, R.H. , 1989, "End-point control of a two-link manipulator with a very flexible forearm: Issues and experiment," in Proceedings of the 1989 American Control Conference vol. 2, pp. 1381-1388. Yang, G.B. and Donath, M. , 1988, "Dynamic model of a two-link robot manipulator with both structural and joint flexibility ," in Proceedings of the ASME Winter Annual Meeting vol. 11, Chicago, IL.

12.

Ygit, A.S. , 1994, "On the stability ofPD control for a two-link rigid-flexible manipulator," Journal of Dynamic Systems, Measurement, and Control 116, 208-215.