On the Isolation Properties of Semiactive Dampers

Abstract

The primary purpose of this study is to evaluate and better understand the isolation properties of semiactive suspensions. Specifically, this study will answer the question regarding why semiactive dampers are able to isolate at frequencies well below those for passive dampers, even though they do not add any energy to the system. A single suspension model is used to derive and analytically evaluate the transmissibility properties of passive and semiactive dampers. The results show that for semiactive dampers, the frequency range of isolation and the transmissibility amplitude are functions of ξ, the damping ratio. In contrast, the isolation frequency range for passive dampers is completely independent of ξ. Furthermore, the results show that for sufficiently large ξ, semiactive dampers are able to provide isolation at all frequencies. This feature is useful for many applications, particularly for sensitive machinery that cannot tolerate any overshoot in power- up or power-down, and yet must have good isolation during normal operation. Passive suspensions offer only one of the two aspects, whereas semiactive suspensions offer both.

Keywords

Semiactive damper vibration isolation

Get full access to this article

View all access options for this article.

References

Ahmadian, M. , 1997, "Semiactive control of multiple degree of freedom systems ," in Proceedings of the Sixteenth Biennial Conference on Mechanical Vibration, ASME Design Technical Conference, Sacramento, CA.

Ahmadian, M. and Marjoram, R.H. , 1989a, "Effects of passive and semiactive suspensions on body and wheelhop control," Journal of Commercial Vehicles 98, 596-604.

Ahmadian, M. and Marjoram, R.H. , 1989b, "On the development of a simulation model for tractor semitrailer systems with semiactive suspensions," in Proceedings of the Special Joint Symposium on Advanced Technologies, 1989 ASME Winter Annual Meeting, San Francisco, CA.

Ahmadian, M. , Reichert, B. , and Song, X. , 1997, "Harmonic analysis of semiactive suspensions," in Proceedings of the Sixteenth Biennial Conference on Mechanical Vibration, ASME Design Technical Conference, Sacramento, CA.

Chalasani, R.M. , 1986a, "Ride performance potential of active suspension systems—Part I: Simplified analysis based on a quarter-car model," in Proceedings of the 1986 ASME Winter Annual Meeting , Los Angeles, CA.

Chalasani, R.M. , 1986b, "Ride performance potential of active suspension systems—Part II: Comprehensive analysis based on a full-car model," in Proceedings of the 1986 ASME Winter Annual Meeting , Los Angeles, CA.

Crosby, M.J. and Karnopp, D.C. , 1973, "The active damper," Shock and Vibrations Bulletin 43.

Inman, D.J. , 1996, Engineering Vibration, Prentice Hall , Englewood Cliffs, New Jersey.

Ivers, D.E. and Miller, L.R. , 1991, "Semiactive suspension technology: An evolutionary view ," ASME Advanced Automotive Technologies DE-40, 327-346.

10.

Karnopp, D.C. and Crosby, M.J. , 1974, "System for controlling the transmission of energy between spaced members," U.S. Patent 3,807,678.

11.

Krasnicki, E.J. , 1980, "Comparison of analytical and experimental results for a semiactive vibration isolator," Shock and Vibration Bulletin 50.

12.

Meirovitch, L. , 1986, Elements of Vibration Analysis, 2nd ed., McGraw-Hill, New York.

13.

Miller, L.R. , 1988, "An approach to semiactive control of multiple-degree-of-freedom systems," Ph.D. dissertation, North Carolina State University , Raleigh, NC.