The purpose of this research is to apply an eigensensitivity-based method to develop an accurate representation of the in-service boundary conditions of structures. By implementing the method on a printed circuit board (PCB) supported on its three edges by two opposite wedge retainers and a plug-in connector, it is shown to be effective in producing an accurate finite element model of the PCB structure. The result shows that the percentage error in the fundamental frequency of the PCB finite element model is substantially reduced from 22.3% to 1.3%. Furthermore, convergence to an accurate finite element model is found to be rapid.
Barker, D.B. and Chen, Y.S., 1993, "Modeling the vibration restraints of wedge lock card guides," Journal of Electronic Packaging115, 189-194.
2.
Baruch, M., 1978, "Optimization procedure to correct stiffness and flexibility matrices using vibration tests," AIAA Journal16(11), 1208-1210.
3.
Baruch, M. and Itzhack, I.Y.B., 1978, "Optimal weighted orthogonalization of measured modes ," AIAA Journal16(4), 346-351.
4.
Berman, A., "Mass matrix correction using an incomplete set of measured modes," AIAA Journal17(10), 1147-1148.
5.
Brandon, J.A., 1990, Strategies for Structural Dynamic Modification , Research Studies Press, Taunton , Somerset, England.
6.
Ewins, D.J., 1984, Modal Testing: Theory and Practice, Research Studies Press, Letchworth, Hertfordshire, England.
7.
Fox, R.L. and Kapoor, M.P., 1968, "Rates of change of eigenvalues and eigenvectors ," AIAA Journal6(12), 246-249.
8.
Golub, G.H. and Van Loan, C.V., 1983, Matrix Computations, North OxfordAcademic Publishing, Oxford, England.
9.
He, J. and Ewins, D.J., 1986, "Analytical stiffness matrix correction using measured vibration modes," International Journal of Analytical and Experimental Modal Analysis1(3), 9-14.
10.
Laura, P.A.A. and Cortinez, V.H., 1995, "Dynamic stiffening of thin plates of regular polygonal shape," Journal of Sound and Vibration183(4), 607-614.
11.
Laura, P.A.A., Ercoli, L., and La Malfa, S., 1995, "Dynamic stiffening of a printed circuit board ," Acustica81, 196-197.
12.
Lim, G.H. and Ong, Y.K., 1990, "Effects of card guide types and lengths on dynamic response of printed circuit board," in Proceedings of the MINDEF-NTI Joint R & D Seminar, Singapore, pp. 12-17.
