Feedback Through Steady-State Target Optimization for Nonlinear Model Predictive Control

Abstract

Model predictive control (MPC) algorithms use an explicit process model to predict future plant behavior and select an optimal control sequence based on a user-defined objective function. The optimal sequence is implemented until new data are available, at which time the data are incorporated as feedback and the calculation is repeated. One of the defining features of MPC is the repeated optimization of an objective that incorporates the most recent feedback from the process. Since most MPC algorithms used in industry are based on input-output models, state feedback is rarely used in practice. Feedback is usually incorporated by including an output error term in the objective function that includes the effects of disturbances and model mismatch. When internal states are included in the process model, other feedback options become available. This paper presents a promising new feedback approach in which the output error term is used to precalculate steady-state targets for state and control variables by means of an initial nonlinear program. The target values are then used to formulate the dynamic MPC objective. Results show that the new approach can provide stability and robustness properties equivalent to those of conventional MPC feedback formulations, with as much as an order of magnitude decrease in overall computation time. This makes nonlinear, state-based MPC much more attractive for on-line implementation.

Keywords

Model predictive control optimization nonlinear control stability

Get full access to this article

View all access options for this article.

References

Badgwell, T.A. , 1995, "Robust stability conditions for SISO model predictive control algorithms," Automatica.

Bitmead, R.R. , Gevers, M. , and Wertz, V. , 1990, Adaptive Optimal Control: The Thinking Man's GPC, Prentice Hall, Englewood Cliffs, NJ.

Demircioğlu, H. and Clarke, D.W. , 1993, "Generalised predictive control with end-point state weighting ," IEE Proc.-D 140, 275-282.

Eaton, J.W. and Rawlings, J.B. , 1990, "Feedback control of chemical processes using on-line optimization techniques," Comput. Chem. Eng. 14, 469-479.

Finlayson, B.A. , 1980, Nonlinear Analysis in Chemical Engineering, McGraw-Hill, New York.

García, C.E. and Morari, M. , 1982, "Internal model control: 1. A unifying review and some new results," Ind. Eng. Chem. Proc. Des. Dev. 21, 308-323.

García, C.E. , Prett, D.M. , and Morari, M. , 1989, "Model predictive control: Theory and practice—A survey," Automatica 25, 335-348.

Kantor, J.C. , 1986, "Stability of state feedback transformations for nonlinear systems: Some practical considerations" in Proceedings of the 1986 American Control Conference, Seattle, WA.

Keerthi, S.S. and Gilbert, E.G. , 1988, "Optimal infinite-horizon feedback laws for a general class of constrained discrete-time systems: Stability and moving-horizon approximations ," J. Optim. Theory Appl 57, 265-293.

10.

Kravaris, C. and Daoutidis, P. , 1990, "Nonlinear state feedback control of second-order nonminimum-phase nonlinear systems," Comput. Chem. Eng. 14,439-449.

11.

Kwon, W.H. and Pearson, A.E. , 1977, "A modified quadratic cost problem and feedback stabilization of a linear system," IEEE Trans. Auto. Cont. 22, 838-842.

12.

Kwon, W.H. and Pearson, A.E. , 1978, "On feedback stabilization of time-varying discrete linear systems," IEEE Trans. Auto. Cont. 23, 479-481.

13.

Mayne, D.Q. and Michalska, H. , 1990, "Receding horizon control of nonlinear systems," IEEE Trans. Auto. Cont. 35, 814-824.

14.

Meadows, E.S. , Henson, M.A. , Eaton, J.W. , and Rawlings, J.B. , 1995, "Receding horizon control and discontinuous state feedback stabilization," Int. J. Control 62, 1217-1229.

15.

Meadows, E.S. , Muske, K.R. , and Rawlings, J.B. , 1995, "Implementable model predictive control in the state space ," in Proceedings of the 1995 American Control Conference, Seattle, WA.

16.

Meadows, E.S. and Rawlings, J.B. , 1996, "Model predictive control," in Nonlinear Process Control , M.A. Henson and D.E. Seborg , eds., Prentice-Hall, Englewood Cliffs, NJ.

17.

Michalska, H. and Mayne, D.Q. , 1993, "Robust receding horizon control of constrained nonlinear systems," IEEE Trans. Auto. Cont. 38, 1623-1633.

18.

Muske, K.R. and Rawlings, J.B. , 1993a, "Linear model predictive control of unstable processes ," J. Proc. Cont. 3, 85-96.

19.

Muske, K.R. and Rawlings, J.B. , 1993b, "Model predictive control with linear models," AIChE J. 39, 262-287.

20.

Patwardhan, A.A. , Rawlings, J.B. , and Edgar, T.F. , 1990, "Nonlinear model predictive control," Chem. Eng. Commun. 87, 123-141.

21.

Qin, S.J. and Badgwell, T.A. , 1996, "An overview of industrial model predictive control technology ." Paper presented at Chemical Process Control—CPC V, Fifth International Conference on Chemical Process Control, Elsevier, Amsterdam.

22.

Rawlings, J.B. , Meadows, E.S. , and Muske, K.R. , 1994, "Nonlinear model predictive control: A tutorial and survey," in ADCHEM '94 Proceedings, Kyoto, Japan.

23.

Rawlings, J.B. and Muske, K.R. , 1993, "Stability of constrained receding horizon control," IEEE Trans. Auto. Cont. 38, 1512-1516.

24.

Scattolini, R. and Bittanti, S. , 1990, "On the choice of the horizon in long-range predictive control: Some simple criteria," Automatica 26, 915-917.

25.

Sistu, P.B. and Bequette, B.W. , 1995, "Model predictive control of processes with input multiplicities ," Chem. Eng. Sci. 6, 921-936.

26.

Thomas, Y.A. , 1975, "Linear quadratic optimal estimation and control with receding horizon," Electron. Lett. 11, 19-21.

27.

Thomas, Y.A. , Sarlat, D. , and Shaw, L. , 1977, "Receding-horizon approach to the synthesis of nonlinear multivariable regulators," Electron. Lett. 13, 329-331.

28.

Van de Vusse, J.G. , 1964, "Plug-flow type reactor versus tank reactor," Chem. Eng. Sci. 19, 964.

29.

Villadsen, J. and Michelsen, M.L. , 1978, Solution of Differential Equation Models by Polynomial Approximation, Prentice Hall, Englewood Cliffs, NJ.