Chain Link Deformation in the Nonlinear Dynamics of Tracked Vehicles

Abstract

In this investigation, a computational finite element procedure for the deformation and stress analysis of the chain links of tracked vehicles is presented and used to examine the validity of using the static approach in the design and stress analysis of tracked vehicles. The contact forces resulting from the interaction between the track links and the vehicle components (sprocket, idler, and the rollers) as well as the interaction between the track links and the ground are evaluated using continuous force models, which are used to define generalized contact forces associated with the deformation degrees of freedom of the track links using the virtual work. The dynamic forces including the contact forces used in the finite element procedure developed in this investigation are evaluated using a 54-body vehicle model in which the track is modeled as a closed kinematic chain with 42 degrees of freedom. It is demonstrated in this study that the effect of the contact forces is more significant as compared to the effect of the rigid-body inertia forces of the chain links, and consequently, it is assumed that the deformation of the track links does not have a significant effect on the overall motion of the vehicle. In the finite element computational procedure used in this study, three-dimensional solid elements are used to discretize the links of the track chain. The numerical results presented in this investigation demonstrate that the use of the static analysis may lead to low estimates of the stresses of the track links as compared to those obtained by a dynamic stress analysis that takes into consideration the time history of the forces.

Keywords

Tracked vehicles chain links multibody dynamics finite element stress analysis track deformation

Get full access to this article

View all access options for this article.

References

Bando, K. , Yoshida, K. , and Hori, K. , 1991, "The development of the rubber track for small size bulldozers ," International Off-Highway Powerplants Congress and Exposition , September 9-12, Milwaukee, WI.

Bucknor, N.K. and Freudenstein, F. , 1992, "Kinematic and static force analysis of rocker-pin jointed silent chains with involute sprockets," Proceedings of the ASME 1992 Mechanisms Conference, DE-Vol. 46, September 13-17, Scottsdale, AZ.

Burnett, D.S. , 1987, Finite Element Analysis, From Concepts to Applications , Addison-Wesley Publishing Co., Reading, MA.

Chen, D.C. , Shabana, A.A. , and Rismantab-Sany, J. , 1991, "Generalized and actual constraint forces in the inverse dynamic analysis of spatial flexible mechanical systems," Proceedings of the ASME

1991

Design Automation, September 13-16, Miami, FL.

Chew, M. , 1985, "Inertia effects of a roller-chain on impact intensity ," ASME Journal of Mechanisms, Transmissions, and Automation in Design 107, 123-130.

Cook, R.D. and Young, W.C. , 1985, Advanced Mechanics of Materials, Macmillan Publishing Company, New York.

Khulief, Y.A. and Shabana, A.A. , 1987, "A continuous force model for the impact analysis of flexible multibody systems," Mechanism and Machine Theory 22(3), 213-224.

McCullough, M.K. and Haug, E.J. , 1985, "Dynamics of high mobility track vehicle," ASME Paper No-85-DET-95.

Murray, M. and Canfield, T.R. , 1992, "Modeling of a flexible link power transmission system ," Proceedings of the 6th ASME International Power Transmission and Gearing Conference, September 13-16, Scottsdale, AZ.

10.

Naji, M.R. and Marshek, K.M. , 1983, "Experimental determination of the roller chain load distribution ," ASME Journal of Mechanisms, Transmissions, and Automation in Design 105, 331-338.

11.

Naji, M.R. and Marshek, K.M. , 1984, "Analysis of roller chain sprocket pressure angles ," Mechanism and Machine Theory 19(2), 197-203.

12.

Nakanishi, T. and Shabana, A.A. , 1992, "Dynamics of tracked vehicles," Technical Report KMTR-92-001 , Department of Mechanical Engineering, University of Illinois at Chicago.

13.

Nakanishi, T. and Shabana, A.A. , 1994, "Contact forces in the nonlinear dynamic analysis of tracked vehicles," The International Journal for Numerical Methods in Engineering 37, 1251-1275.

14.

Pachner, J. , 1984, Handbook of Numerical Analysis Applications, McGraw-Hill Book Publishing Co., New York .

15.

Reddy, J.N. , 1984, An Introduction to the Finite Element Method, McGraw-Hill Book Publishing Co., New York .

16.

Shabana, A.A. , 1989, Dynamics of Multibody Systems, John Wiley & Sons, New York.

17.

Shabana, A.A. , 1991, Theory of Vibration, Volume II: Discrete and Continuous Systems, Springer-Verlag, New York .

18.

Shabana, A.A. , 1994, Computational Dynamics, John Wiley & Sons, New York.

19.

Veikos, N.M. and Freudenstein, F. , 1992, "On the dynamic analysis of roller chain drives, parts I and II," Proceedings of the 1992 Mechanisms Conference, DE-Vol. 46, September 13-16, Scottsdale, AZ.

20.

Wehage, R.A. , 1980, "Generalized coordinate partitioning in dynamic analysis of mechanical systems," Ph.D. thesis, the University of Iowa, Iowa City.