Abstract
The nonlinear mechanical oscillator with X-shaped-spring suspension has attracted relevant attention in the past couple of years due to its ability to tailor the corresponding stiffness characteristic on purpose and fit diverse engineering needs. This paper deeply investigates the conditions for such a configuration to exhibit a quasi-zero stiffness behaviour with both the linear and cubic elastic term of the force-displacement curve equal to zero. The resulting quintic characteristic leads to a vibration isolator with a much larger isolation frequency band respect to the classical isolator with non-zero cubic elastic term only. A systematic comparison between the quintic and cubic characteristics is performed, emphasizing the asymptotic trends, and thus showing the fundamental behaviours. It is found that the critical damping for an unbounded response of the quintic isolator is proportional to the square of the normalized excitation amplitude, while that of the cubic isolator is directly proportional to the normalized displacement amplitude. This makes the critical damping of the quintic isolator much lower, and thus more favourable in practical engineering applications, where the values of the normalized excitation amplitude are less than one.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
