Theoretical,numerical,and experimental studies on controlled synchronization strategy of four-axis variable trajectory equal-thickness screen

Abstract

The four-axis variable trajectory equal-thickness screen (FAVTETS) achieves equal-thickness screening by appropriate excitation force generated by four eccentric rotors in synchronized motion. The forced synchronization exciter is characterized by an unsatisfactory synchronization effect due to the wear of transmission parts. Hence, in this paper, the four-axis controlled synchronization of FAVTETS is investigated, and an intelligent control system is proposed. Firstly, research is conducted on the variable trajectory characteristics of FAVTETS. Next, the sliding mode, fuzzy, and PID controllers are designed and compared to obtain an ideal control effect. Moreover, the influence of torsional stiffness of flexible coupling on control accuracy is considered. The results show that the sliding mode controller has a good control effect. Based on the aforementioned, the simulation model of a four-axis controlled synchronization structure is established via MATLAB/Simulink. Finally, Labview is employed to design the four-axis controlled synchronization software system. Then, the physical experiment is carried out. The four-axis controlled synchronization and vibration trajectory measurement results verify the effectiveness and robustness of the intelligent control system.

Keywords

controlled synchronization dynamic modeling variable trajectory intelligent algorithm vibration system

Get full access to this article

View all access options for this article.

References

Aylin

Gebrail

Sinan

, et al. (2020) Optimum design of PID controlled active tuned mass damper via modified harmony search. Applied Sciences 10(8): 2976.

Fang

Peng

C-C

, et al. (2020) Synchronous state of unbalanced rotors in a three-dimensional space and far-resonance system. Journal of Process Mechanical Engineering 234(1): 108–122.

Fang

Wang

Y-G

Zou

, et al. (2021) Combined control strategy for synchronization control in multi-motor-pendulum vibration system. Journal of Vibration and Control 28: 2254–2267. DOI: 10.1177/10775463211007992.

Hernandez-Guzman

Orrante-Sakanassi

(2017) Global PID control of robot manipulators equipped with PMSMs. Asian Journal of Control 20(1): 236–249.

, et al. (2019) Synchronous control of two counter-rotating eccentric rotors in nonlinear coupling vibration system. Mechanical Systems and Signal Processing 114: 68–83.

, et al. (2018) Multiple-frequency controlled synchronization of two homodromy eccentric rotors in a vibratory system. Shock and Vibration 2018: 1–12.

, et al. (2015) Adaptive PID speed control design for permanent magnet synchronous motor drives. IEEE Transactions on Power Electronics 30(2): 900–908.

(2018) Composite synchronization of a four eccentric rotors driven vibration system with a mass-spring rigid base. Journal of Sound and Vibration 427: 63–81.

, et al. (2016) Synchronization analysis and control of three eccentric rotors in a vibrating system using adaptive sliding mode control algorithm. Mechanical Systems and Signal Processing 73: 432–450.

(2018) Composite synchronization of a four eccentric rotors driven vibration system with a mass-spring rigid base. Journal of Sound and Vibration 427:63–81.

(2018) Composite synchronization of three eccentric rotors driven by induction motors in a vibrating system. Mechanical Systems and Signal Processing 102: 158–179.

, et al. (2022) Dynamic characteristics of a simply supported elastic beam with three induction motors. Journal of Sound and Vibration 520: 1–28.

13.

Chen

Yao

(2018) Adaptive robust synchronization control of a dual-linear-motor-driven gantry with rotational dynamics and accurate online parameter estimation. IEEE Transactions on Industrial Informatics 14(7): 3013–3022.

, et al. (2021) Kinematics characteristics of the flip-flow screen with a crankshaft-link structure and screening analysis for moist coal. Powder Technology 394: 326–335.

, et al. (2012) Dynamic analysis and simulation of four-axis forced synchronizing banana vibrating screen of variable linear trajectory. Journal of Central South University 19(6): 1530–1536.

, et al. (2018) Cross-coupled fuzzy logic sliding mode control of dual-driving feed system. Advances in Mechanical Engineering 10(2): 1687814018755518.

(2010) Induction Motor Control Design. Springer: Springer Science & Business Media.

18.

Miklos

Szabo

(2015) Simulation and experimental validation of the dynamical model of a dual-rotor vibrotactor. Journal of Sound and Vibration 334: 98–107.

(2016) Stability analysis and controller design for the performance improvement of disturbed nonlinear systems using adaptive global sliding mode control approach. Nonlinear Dynamics 83(3): 1557–1565.

20.

Moncada

Rodriguez

(2018) Dynamic modeling of a vibrating screen considering the ore inertia and force of the ore over the screen calculated with discrete element method. Shock and Vibration 2018: 1–13.

, et al. (2018) Position tracking control of PMSM based on fuzzy PID-variable structure adaptive control. Mathematical Problems in Engineering 2018: 1–15.

, et al. (2018) Research on screening mechanism and parameters optimization of equal thickness screen with variable amplitude based on DEM simulation. Powder Technology 331: 296–309.

, et al. (2021) Design and performance analysis of adaptive neuro-fuzzy controller for speed control of permanent magnet synchronous motor drive. Soft Computing 25(2): 1519–1533.

(2022) Analytical study of self-synchronization in two unbalanced rotors based on energetic conditions. Journal of Sound and Vibration 521: 1–16.

, et al. (2020) A vibration-test-based calculation method of screening material mass of a mining crank-link type flip-flow screen. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 2020: 1–21. DOI: 10.1080/15567036.2020.1778139 .

, et al. (2017) Vibration characteristics of an inclined flip-flow screen panel in banana flip-flow screens. Journal of Sound and Vibration 411: 108–128.

, et al. (2015) Numerical and experimental study on synchronization of two exciters in a nonlinear vibrating system with multiple resonant types. Nonlinear Dynamics 82(1): 987–999.

, et al. (2022) Theoretical, numerical and experimental studies on multi-cycle synchronization of two pairs of reversed rotating exciters. Mechanical Systems and Signal Processing 167: 108501.

, et al. (2018) Design method of dynamic parameters of a self-synchronization vibrating system with dual mass. Proceedings - Institution of Mechanical Engineers 232(1): 3–20.

(2018) Path tracking of permanent magnet synchronous motor using fractional order fuzzy PID controller. Symmetry-Basel 13(7): 1118.

, et al. (2021) Synchronization analysis of two eccentric rotors with double-frequency excitation considering sliding mode control. Communications in Nonlinear Science and Numerical Simulation 92: 105458.

, et al. (2022) Investigation on multiple-frequency synchronization experiment of vibration system with dual-rotor actuation. Mechanical Systems and Signal Processing 164: 108261.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

0.43 MB