Abstract
The use of friction pendulum system (FPS) as a base isolation system is one of the efficient and reliable techniques for seismic response reduction of liquid storage tanks. However, recent studies have shown that the FPS may experience substantial displacements under pulse-like near-fault earthquakes, which could lead to the collision of its articulated slider against the retainer ring. This internal impact in the FPS can make the isolation system less effective or even damaged. The best solution to this problem is to provide an appropriate displacement capacity of the FPS bearing to accommodate the resulting movements. However, due to any practical limitation or under extreme ground motions, the base displacement may exceed the displacement capacity provided and an internal impact may occur. This paper proposes and investigates the use of elastic and viscous bumpers in FPS-isolated tanks subjected to near-fault earthquakes to limit excessive bearing displacements and to prevent direct impact with the retainer. The material properties of the bumpers and their initial gap distance are used as variable parameters in the nonlinear time-history analyses of selected isolated tanks with different aspect ratios. The results, while showing the advantages of viscous bumpers over elastic ones, indicate the effectiveness of both shock absorbers in isolated tanks that are subject to large displacement demands. Based on the results of the parametric study, design recommendations are given for the use of such bumpers in FPS-isolated tanks.
Get full access to this article
View all access options for this article.