Sage Journals: Discover world-class research

Abstract

In this article, the residual vibration signal of the worktable of the machine tool is used to identify its dynamic parameters. By analyzing the time-domain characteristics of the residual vibration signal, it is found that the signal has the similar attenuation characteristics to the impulse response of the second-order underdamped system, so a new method for identifying the dynamic parameters of the worktable is proposed. In this method, the impulse response model of the second-order underdamped system is used to describe the residual vibration signal, so the parameter identification problem based on the time-domain signal is transformed into the optimization problem of the model parameters. Then, the dynamic parameters can be determined by using the genetic algorithm. The results of the genetic algorithm are compared with the results of the autoregressive moving average method, which is a commonly used parameter identification method based on the time-domain signal. It was found that the results of the model-based method proposed in this article are more accurate than the autoregressive moving average method.

Keywords

Dynamic parameters identification residual vibration genetic algorithm autoregressive moving average method

Get full access to this article

View all access options for this article.

References

Baek

Kim

(2006) Parameter identification for a single-degree-of-freedom system using autoregressive moving average model: application to cutting system. Journal of Sound and Vibration 295(1–2): 428–435.

Cai

Luo

Mao

, et al. (2015) A method for identification of machine-tool dynamics under machining. Procedia CIRP 31: 502–507.

Ding

Wang

(2016) Recursive least squares identification algorithms for linear-in-parameter systems with missing data. Control and Decision 31(12): 2261–2266.

Gagnol

T-P

Ray

(2011) Modal identification of spindle-tool unit in high-speed machining. Mechanical Systems and Signal Processing 25: 2388–2398.

Ghovvati

Khayati

Attar

, et al. (2016) Kinetic parameters estimation of protease production using penalty function method with hybrid genetic algorithm and particle swarm optimization. Biotechnology & Biotechnological Equipment 30(2): 404–410.

Hidayat

Medvedev

(2012) Laguerre domain identification of continuous linear time-delay systems from impulse response data. Automatica 48(11): 2902–2907.

Cai

Mao

, et al. (2013) Estimation of CNC machine-tool dynamic parameters based on random cutting excitation through operational modal analysis. International Journal of Machine Tools and Manufacture 71: 26–40.

Maamar

T-P

Gagnol

, et al. (2017) Operational modal analysis of a machine-tool structure during machining operations. In: Congrès français de mécanique, Lille, 28 September 2017. Lyon, France: AFM Association Française de Mécanique.

Maamar

T-P

Gagnol

, et al. (2019) Modal identification of a machine tool structure during machining operations. The International Journal of Advanced Manufacturing Technology 102(1–4): 253–264.

10.

Peeters

De Roeck

(2001) Stochastic system identification for operational modal analysis: a review. Journal of Dynamic Systems, Measurement, and Control 123(4): 659–667.

11.

Perez-Ramirez

Amezquita-Sanchez

Adeli

, et al. (2016) Time-frequency techniques for modal parameters identification of civil structures from acquired dynamic signals. Journal of Vibroeng-Engineering 18(5): 3164–3185.

12.

(2016) The damping iterative parameter identification method for dynamical systems based on the sine signal measurement. Signal Processing 120(C): 660–667.

13.

Ding

Liu

, et al. (2017) Parameter identification method for process control systems based on the Newton iteration. In: 2017 6th International symposium on advanced control of industrial processes (AdCONIP), Taipei, Taiwan, 28–31 May 2017, pp. 233–238. New York, USA: IEEE

14.

Zaghbani

Songmene

(2009) Estimation of machine-tool dynamic parameters during mach-ining operation through operational modal analysis. International Journal of Machine Tools and Manufacture 49(12–13): 947–957.

Genetic algorithm for dynamic parameters estimation of the machine tool worktable using the residual vibration signal

Abstract

Keywords

Get full access to this article

References