Inspired by previous achievements, different time-domain features for diagnosis of rolling element bearings are investigated in this study. An experimental test rig is prepared for condition monitoring of angular contact bearing by using an acoustic emission sensor for this purpose. The acoustic emission signals are acquired from defective bearing, and the sensor takes signals from defects on the inner or outer race of the bearing. By studying the literature works, different domains of features are classified, and the most common time-domain features are selected for condition monitoring. The considered features are calculated for obtained signals with different loadings, speeds, and sizes of defects on the inner and outer race of the bearing. Our results indicate that the clearance, sixth central moment, impulse, kurtosis, and crest factors are appropriate features for diagnosis purposes. Moreover, our results show that the clearance factor for small defects and sixth central moment for large defects are promising for defect diagnosis on rolling element bearings.
AbboudDAntoniJEltabachM, et al. (2015) Angle time cyclostationarity for the analysis of rolling element bearing vibrations. Measurement75: 29–39.
2.
Al-GhamdAMMbaD (2006) A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect size. Mechanical Systems and Signal Processing20(7): 1537–1571.
3.
AliJBFnaiechNSaidiL, et al. (2015) Application of empirical mode decomposition and artificial neural network for automatic bearing fault diagnosis based on vibration signals. Applied Acoustics89: 16–27.
4.
AntoniJ (2007) Cyclic spectral analysis of rolling-element bearing signals: facts and fictions. Journal of Sound and Vibration304(3–5): 497–529.
5.
AntoniJRandallR (2005) On the use of the cyclic power spectrum in rolling element bearings diagnostics. Journal of Sound Vibration281: 463–468.
6.
AntoniJRandallR (2006) The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines. Mechanical Systems and Signal Processing20(2): 308–331.
7.
BastamiARAasiAArghandHA (2019) Estimation of remaining useful life of rolling element bearings using wavelet packet decomposition and artificial neural network. Iranian Journal of Science and Technology, Transactions of Electrical Engineering43(1): 233–245.
8.
ChenXShenZHeZ, et al. (2013) Remaining life prognostics of rolling bearing based on relative features and multivariable support vector machine. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science227(12): 2849–2860.
9.
ChenZDengSChenX, et al. (2017) Deep neural networks-based rolling bearing fault diagnosis. Microelectronics Reliability75: 327–333.
10.
ChenZLiW (2017) Multisensor feature fusion for bearing fault diagnosis using sparse autoencoder and deep belief network. IEEE Transactions on Instrumentation and Measurement66(7): 1693–1702.
11.
CuiLHuangJZhangF (2017) Quantitative and localization diagnosis of a defective ball bearing based on vertical–horizontal synchronization signal analysis. IEEE Transactions on Industrial Electronics64(11): 8695–8706.
12.
D’EliaGDelvecchioSCocconcelliM, et al. (2013) Application of cyclostationary indicators for the diagnostics of distributed faults in ball bearings. In: ASME 2013 international design engineering technical conferences and computers and information in engineering conference, Portland, OR, 4–7 August 2013. American Society of Mechanical Engineers Digital Collection.
13.
EftekharnejadBCarrascoMCharnleyB, et al. (2011) The application of spectral kurtosis on acoustic emission and vibrations from a defective bearing. Mechanical Systems and Signal Processing25(1): 266–284.
14.
GebraeelNLawleyMLiuR, et al. (2004) Residual life predictions from vibration-based degradation signals: a neural network approach. IEEE Transactions on Industrial Electronics51(3): 694–700.
15.
GobbiANascenteP (2013) Encyclopedia of Tribology. Boston, MA: Springer US.
16.
HarrisTA (2001) Rolling Bearing Analysis. 4–7 August 2013: John Wiley and Sons.
17.
HelmiHForouzantabarA (2018) Rolling bearing fault detection of electric motor using time domain and frequency domain features extraction and ANFIS. IET Electric Power Applications13(5): 662–669.
18.
HowardI (1994) A review of rolling element bearing vibration ‘detection, diagnosis and prognosis’. Australia: Defence Science And Technology Organization Canberra.
19.
HuangRXiLLiX, et al. (2007) Residual life predictions for ball bearings based on self-organizing map and back propagation neural network methods. Mechanical Systems and Signal Processing21(1): 193–207.
20.
JanSULeeY-DShinJ, et al. (2017) Sensor fault classification based on support vector machine and statistical time-domain features. IEEE Access5: 8682–8690.
21.
KilunduBChiementinXDuezJ, et al. (2011) Cyclostationarity of acoustic emissions (AE) for monitoring bearing defects. Mechanical Systems and Signal Processing25(6): 2061–2072.
22.
LeboldMMcClinticKCampbellR, et al. (2000) Review of vibration analysis methods for gearbox diagnostics and prognostics. Proceedings of the 54th Meeting of the Society For Machinery Failure Prevention Technology16: 623–634.
23.
LinH-CYeY-CHuangB-J, et al. (2016) Bearing vibration detection and analysis using enhanced fast Fourier transform algorithm. Advances in Mechanical Engineering8(10): 1687814016675080.
24.
LiuHHuangWWangS, et al. (2014) Adaptive spectral kurtosis filtering based on Morlet wavelet and its application for signal transients detection. Signal Processing96: 118–124.
25.
MehalaNDahiyaR (2008) A comparative study of FFT, STFT and wavelet techniques for induction machine fault diagnostic analysis. In: Proceedings of the 7th WSEAS international conference on computational intelligence, man-machine systems and cybernetics, Cairo, Egypt, 29–31 December 2008. WSEAS press.
26.
QiuHLeeJLinJ, et al. (2006) Wavelet filter-based weak signature detection method and its application on rolling element bearing prognostics. Journal of Sound and Vibration289(4–5): 1066–1090.
27.
RauberTWde Assis BoldtFVarejãoFM (2014) Heterogeneous feature models and feature selection applied to bearing fault diagnosis. IEEE Transactions on Industrial Electronics62(1): 637–646.
28.
RubiniRMeneghettiU (2001) Application of the envelope and wavelet transform analyses for the diagnosis of incipient faults in ball bearings. Mechanical Systems and Signal Processing15(2): 287–302.
29.
Ruiz-CárcelCHernani-RosECaoY, et al. (2014) Use of spectral kurtosis for improving signal to noise ratio of acoustic emission signal from defective bearings. Journal of Failure Analysis and Prevention14(3): 363–371.
30.
SaitASSharaf-EldeenYI (2011) A review of gearbox condition monitoring based on vibration analysis techniques diagnostics and prognostics. Rotating Machinery, Structural Health Monitoring, Shock and Vibration5: 307–324.
31.
SakoTYoshieO (2010) Diagnostic method of low speed rolling element bearing using AE envelope waveform. In: TENCON 2010-2010 IEEE region 10 conference, Fukuoka, Japan, 21–24 November 2010. IEEE, 724–729.
32.
SamantaBAl-BalushiK (2003) Artificial neural network based fault diagnostics of rolling element bearings using time-domain features. Mechanical Systems and Signal Processing17(2): 317–328.
33.
SamuelPDPinesDJ (2005) A review of vibration-based techniques for helicopter transmission diagnostics. Journal of Sound and Vibration282(1–2): 475–508.
34.
SawalhiNRandallRB (2004) The application of spectral kurtosis to bearing diagnostics. Proceedings of Acoustics: 3–5.
35.
ShiDWangWQuL (2004) Defect detection for bearings using envelope spectra of wavelet transform. Journal of Vibration and Acoustics126(4): 567–573.
36.
TabatabaeiRAasiAJafariSM (2020) Experimental investigation of the diagnosis of angular contact ball bearings using acoustic emission method and empirical mode decomposition. Advances in Tribology2020: 8231752.
37.
ZhangXLiangYZhouJ (2015) A novel bearing fault diagnosis model integrated permutation entropy, ensemble empirical mode decomposition and optimized SVM. Measurement69: 164–179.
38.
ZhangXLiuZWangJ, et al. (2019) Time–frequency analysis for bearing fault diagnosis using multiple Q-factor Gabor wavelets. ISA Transactions87: 225–234.
39.
ZhangZWangYWangK (2013) Fault diagnosis and prognosis using wavelet packet decomposition, Fourier transform and artificial neural network. Journal of Intelligent Manufacturing24(6): 1213–1227.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
