Mitigation of vibrations in sandwich-type structures by a controllable constrained layer

Abstract

This study presents and tests a method for semi-active control of vibrations in sandwich-type beam structures. This method adapts a strategy called prestress accumulation release. The prestress accumulation release strategy is based on structural reconfiguration: it uses short time, impulsive and localised changes of actuator properties (such as stiffness or damping), which are applied to a part of the system in the moments, when its strain energy attains a local maximum. The method has been earlier applied as a global control scheme to mitigate the fundamental vibration mode of a cantilever beam (by stiffness control) and in the task of mitigating the first four modes of a frame structure (by damping control). This study proposes a prestress accumulation release strategy and tests its effectiveness for the case of a three-layered sandwich structure, with the internal layer fabricated from a material with dissipative characteristic locally controllable through the material damping coefficient. In contrast to the earlier research, the control is applied thus at the level of material characteristics instead of a discrete set of dedicated actuators. Based on the finite element method, a numerical experiment involving a passively damped, as well as prestress accumulation release-controlled, three-layered cantilever beam excited by initial displacements was performed. The effectiveness of the approach was studied for a broad range of internal layer damping parameters. The presented results revealed a high potential of the prestress accumulation release strategy in semi-active damping of vibrations of sandwich-type structures.