Evaluation of acoustic emission burst detection methods in a gearbox under different operating conditions

Abstract

In account of its abilities to follow the damage progression, also at early stages, the acoustic emission (AE) analysis has become an attractive technique for machine condition monitoring. An AE analysis involves the detection of transients within the signals, which are called AE bursts. Traditional methods for AE burst detection are based on the definition of threshold values. When the machine under analysis works under variable operating conditions, threshold-based methods could lead to poor results due to the influence of these conditions on the AE generation. The present work compares the ability of three AE burst detection methods in a planetary gearbox working under different rotational speeds and loads. The results showed that performance could be significantly improved by using factors of the root mean square value as threshold values instead of fixed values. Among the evaluated methods, the method that includes demodulation and differentiation as a signal processing technique had the best performance overall.

Keywords

Acoustic emission planetary gearbox variable load and rotational speed hit detection

Get full access to this article

View all access options for this article.

References

Barile C, Casavola C, Pappalettera G, et al. (2015) Fatigue damage monitoring by means of acoustic emission and thermography in Ti Grade 5 specimens. Procedia Engineering 114: 487–492. Available at: https://www.sciencedirect.com/science/article/pii/S187770581501735X.

Boos FD (2015) Acoustic Emission bei der Maschinen- und Prozessüberwachung – Neue Analysemethoden und Anwendungsgebiete [Acoustic emission in machine and process monitoring – New analysis methods and fields of application]. PhD Thesis, RWTH Aachen University, Germany. [In German.].

Boughorbei

Jarray

El-Anbari

(2017) Optimal classifier for imbalanced data using Matthews correlation coefficient metric. PLoS ONE 12(6): e: 0177678. Available at: https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0177678 (accessed 8 January 2018).

Choudhury

Tandon

(2000) Application of acoustic emission technique for the detection of defects in rolling element bearings. Tribology International 33(1): 39–45.

DIN 1330-9:2009 (2009) Terms used in acoustic emission testing.

Elasha

Greaves

Mba

et al. (2017) A comparative study of the effectiveness of vibration and acoustic emission in diagnosing a defective bearing in a planetry gearbox. Applied Acoustics 115: 181–195. .

Hellier CJ (2003) Handbook of Nondestructive Evaluation. New York, NY: McGraw-Hill. Availabel at: https://www.sciencedirect.com/science/article/pii/S0003682X16302201.

ISO 12716:2001 (2001) Non-destructive testing – Acoustic emission inspection. Available at: https://www.iso.org/obp/ui/#iso:std:iso:12716:ed-1:v1:en (accessed 12 December 2017).

ISO 22096:2007 (2007) Condition monitoring and diagnostics of machines – Acoustic emission. Available at: https://www.iso.org/standard/40686.html (accessed 12 December 2017).

10.

Keshtgar A and Modarres M (2013) Acoustic emission-based fatigue crack growth prediction. In: Proceedings Annual Reliability and Maintainability Symposium, 28–31 January 2013, Orlando, Florida, USA. Piscataway, NJ: Institute of Electrical and Electronics Engineers, pp.1–5.

11.

Lei Y, Lin J, Zuo MJ, et al. (2014) Condition monitoring and fault diagnosis of planetary gearboxes: A review. Measurement 48: 292–305. Available at: https://www.sciencedirect.com/science/article/pii/S0263224113005551.

12.

Lopes

Ferreira

Alexandre

et al. (2017) Digital signal processing of acoustic emission signals using power spectral density and counts statistic applied to single-point dressing operation. IET Science, Measurement and Technology 11(5): 631–636.

13.

Loutas

Sotiriades

Kalaitzoglou

et al. (2009) Condition monitoring of a single-stage gearbox with artificially induced gear cracks utilizing on-line vibration and acoustic emission measurements. Applied Acoustics 70(9): 1148–1159.

14.

Mazal P, Vlasic F and Koula V (2015) Use of acoustic emission method for identification of fatigue micro-cracks creation. Procedia Engineering 133: 379–388. Available at: https://www.sciencedirect.com/science/article/pii/S1877705815045865.

15.

Miller

McIntire

(1987) Non-Destructive Testing Handbook: Volume 5, Acoustic Emission Testing, Columbus, OH: American Society for Nondestructive Testing.

16.

Nienhaus K, Boos FD, Garate K, et al. (2012) Development of Acoustic Emission (AE) based defect parameters for slow rotating roller bearings. In: 25th International congress on condition monitoring and diagnostics engineering. IOP Publishing, Journal of Physics: Conference Series 364. Available at: http://iopscience.iop.org/article/10.1088/1742-6596/364/1/012034/pdf (accessed 13 Dec 2017).

17.

Novoa

Vicuña

(2016) New aspects concerning the generation of acoustic emissions in spur gears, the influence of operating conditions and gear defects in planetary gearboxes. Insight 58(1): 18–27.

18.

Sharma V and Parey A (2016) A review of gear fault diagnosis using various condition indicators. Procedia Engineering 144: 253–263. Available at: https://www.sciencedirect.com/science/article/pii/S1877705816303484.

19.

Stern R (1972) Experimental techniques in Acoustic Emission Detection Systems. In: IEEE Ultrasonics Symposium, 4–7 October 1972, Boston, Massachusetts, USA, 4–7 October 1972. Piscataway, NJ: Institute of Electrical and Electronics Engineers, pp.1–3.

20.

Tan

Mba

(2005a) Experimentally established correlation between acoustic emission activity, load, speed, and asperity contact of spur gears under partial elastohydrodynamic lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 219(6): 401–409.

21.

Tan

Mba

(2005b) Identification of the acoustic emission source during a comparative study on diagnosis of a spur gearbox. Tribology International 38(5): 469–480.

22.

Tan

Irving

Mba

(2007) A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears. Mechanical Systems and Signal Processing 21(1): 208–233.

23.

Thayoob YH, Abidin NF, Zakaria Z, et al. (2010) Detection of acoustic emission signals from partial discharge sources in oil-pressboard insulation system. In: Proceedings of IEEE Student Conference on Research and Development, 13–14 December, Putrajaya, Malaysia. Piscataway, NJ: Institute of Electrical and Electronics Engineers, pp.318–385.

24.

Vicuña CM (2009) Contributions to the analysis of vibrations and acoustic emissions for the condition monitoring of epicyclic gearboxes. PhD Thesis, RWTH Aachen University, Germany. Available at: https://theses.eurasip.org/media/theses/documents/molina-vicuna-cristian-contributions-to-the-analysis-of-vibrations-and-acoustic-emissions-for-the-condition-monitoring-of-epicyclic-gearboxes.pdf (accessed 17 May 2017).

25.

Vicuña CM (2014) Effects of operating conditions on the Acoustic Emissions (AE) from planetary gearboxes. Applied Acoustics 77: 150–158. Available at: https://www.sciencedirect.com/science/article/pii/S0003682X13001138.

26.

Vicuña CM and Höweler C (2013) A method for extreme data reduction of Acoustic Emission (AE) data with application in machine failure diagnosis. In: Proceedings of Surveillance 7 International Conference, Chartres, France, 29–30 October. Available at: https://surveillance7.sciencesconf.org/conference/surveillance7/02_a_method_for_extreme_data_reduction_of_acoustic_emission_ae_data_with_application_in_ma.pdf (accessed 29 Nov 2017).

27.

Yoon J, He D, Hecke BV, et al. (2014) Planetary gearbox fault diagnosis using a single piezoelectric strain sensor. In: Annual Conference of the Prognostics and Health Management Society, Forh Worth, USA, 29 September–2 October 2013. Prognostics and Health Management Society, pp.118–127.