Buildings may experience excessive floor vibrations due to inner excitations such as walking people and running machines, or ground motion caused by the road traffic. Therefore, it is often necessary to evaluate the vibration level at the design stage. In this paper, a frequency domain-based model for predicting vertical vibrations of a building floor is provided, where the floor is simplified as a rectangular plate stiffened by beams in two orthogonal directions, while vertical motion and rotation of the slab–column joints are viewed as the unknown degrees of freedom. The dynamic stiffness matrix of the whole structure is obtained from those of the floor and column elements. To validate the proposed solution, a five-story building was analyzed, and frequency spectra were compared with those from the finite element method. Besides, a prototype building was analyzed and validated based on field measured data. It is found that the proposed solution could predict vibration responses with satisfactory accuracy, and is more computationally efficient than finite element analysis.
CaoZGuoTZhangZ (2017) Vibration measurement in a metro depot with trains running in the top story. Journal of Vibroengineering19(1): 502–519.
2.
ClotAArcosRRomeuJ (2017) Efficient three-dimensional building-soil model for the prediction of ground-borne vibrations in buildings. Journal of Structural Engineering143(9): 04017098. Available at: https://ascelibrary.org/doi/10.1061/%28ASCE%29ST.1943-541X.0001826.
3.
DevinAFanningPJ (2012) The evolving dynamic response of a four storey reinforced concrete structure during construction. Shock and Vibration19(5): 1051–1059.
4.
DevinAFanningPJPavicA (2015) Non-structural partitions and floor vibration serviceability. Journal of Architecture Engineering22(1): 04015008.
5.
GB50010-88 (2010) Code for Design of Concrete Structures, Beijing, China: Press of China Standards. [In Chinese.]
6.
GuoTCaoZZhangZet al.(2017) Numerical simulation of floor vibrations of a metro depot under moving subway trains. Journal of Vibration and Control. 24(18): 4353–4366.
Hussein M, Hunt H, Kuo K, et al. (2015) The use of sub-modelling technique to calculate vibration in buildings from underground railways. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 229(3): 303–314.
9.
International Organization for Standardization (1997) ISO 2631-1, Mechanical Vibration and Shock-Evaluation of Human Exposure to Whole-Body Vibration-Part 1: General Requirements.
10.
International Organization for Standardization (2003) ISO 2631-2, Mechanical Vibration and Shock-Evaluation of Human Exposure to Whole-Body Vibration-Part 2: Vibration in Buildings (1 Hz to 80 Hz).
11.
Iwasaki Y and Nakagawa K (2016) Effects of vibration by demolition on nearby machine shop floor-wave measurement for dynamic property of ground. In: Rao VVS and Bab GLS (eds) Forensic Geotechnical Engineering. New Delhi: Springer India, pp.297–310.
12.
LeeU (2009) Spectral Element Method in Structural Dynamics, Clementi Loop, Singapore: John Wiley & Sons.
13.
LiWLZhangXDuJet al.(2009) An exact series solution for the transverse vibration of rectangular plates with general elastic boundary supports. Journal of Sound and Vibration321(1–2): 254–269.
14.
LimCWYaoWACuiS (2008) Benchmark symplectic solutions for bending of corner-supported rectangular thin plates. IES Journal Part A: Civil and Structural Engineering1(2): 106–115.
15.
LinTRPanJ (2006) A closed form solution for the dynamic response of finite ribbed plate. Journal of the Acoustical Society of America119(2): 917–925.
16.
LinTRTanJZhouYet al.(2016) A study of ribbing effect on the vibration response and transmission of an L-shaped plate. Journal of the Acoustical Society of America139(6): 3063–3075.
17.
LiuXBanerjeeJR (2016) Free vibration analysis for plates with arbitrary boundary conditions using a novel spectral-dynamic stiffness method. Computers and Structures164(3): 108–126.
MaMLiuWQianCet al.(2016) Study of the train-induced vibration impact on a historic Bell Tower above two spatially overlapping metro lines. Soil Dynamics and Earthquake Engineering81(1): 58–74.
20.
PerssonPPerssonKSandbergG (2016) Numerical study on reducing building vibrations by foundation improvement. Engineering Structures124(1): 361–375.
Porter R (2017) Eigenfrequencies and eigenmodes for a thin rectangular elastic plate with free edges. In: British Applied Mathematics Colloquium, Guildford, England, 6 April 2017. Available at: https://people.maths.bris.ac.uk/∼marp/abstracts/free-edge.pdf.
23.
SanayeiMZhaoNMauryaPet al.(2012a) Prediction and mitigation of building floor vibrations using a blocking floor. Journal of Structural Engineering138(10): 1181–1192.
24.
Sanayei M, Maurya P, Zha N, et al. (2012b) Impedance modeling: An efficient modeling method for prediction of building floor vibrations. In: Structures Congress 2012, Chicago, United States, 29–31 March 2012, pp. 886–897. Available at: https://ascelibrary.org/doi/abs/10.1061/9780784412367.079.
