Dynamic engraving processes upon a projectile under five charge cases were studied using numerical simulations. A finite element model of the rotating band engraving into the forcing cone of the barrel was constructed, and the deformation process of the rotating band, the projectile motions, the dynamic engraving resistance, the average work pressure and the engraving pressure were obtained. The simulation results show that the interior ballistic parameters, including the engraving speed, the projectile motion, the maximum engraving resistance and the engraving pressure are different for different charge cases. This work provides an approach to investigating the interior ballistics processes considering the dynamic engraving of rotating bands.
AndrewsTD (2006) Projectile driving band interactions with gun barrels. Journal of Pressure Vessel Technology128(2): 273–278.
2.
Balla J, Jankovych R and Duong VY (2011) Interaction between projectile driving band and forcing cone of weapon barrel. In: Thomas G, Fleaurant C, Panagopoulos T, et al. (eds) Proceedings of the 13th IASME/WSEAS international conference on mathematical methods and computational techniques in electrical engineering conference on applied computing, Angers, France, 17–19 November, pp.194–199. Wisconsin, USA: World Scientific and Engineering Academy and Society (WSEAS).
3.
BørvikTHopperstadOSLangsethM (2003) Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates. International Journal of Impact Engineering28(4): 413–464.
4.
BørvikTClausenAHErikssonM (2005) Experimental and numerical study on the perforation of AA6005-T6 panels. International Journal of Impact Engineering32(1): 35–64.
5.
Carlucci D, Vega J, Pocock M, et al. (2007) Novel examination of gun bore resistance analysis and experimental validation. In: Gálvez F and Sánchez-Gálvez V (eds). Proceedings of the 23rd international symposium on ballistics, Tarragona, Spain, 16–20 April, pp.313–320. Tarragona, Spain: International Ballistics Society.
6.
ChenPC (1999) Analysis of engraving and wear in a projectile rotating band. Report no. ARCCB-TR-99012, July, Watervliet, NY: US Armament Research, Development and Engineering Center.
Johnson GR and Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th international symposium on ballistics, The Hague, The Netherlands, 19–21 April, pp. 541–547. The Hague, The Netherlands: International Ballistics Committee.
11.
JohnsonGRCookWH (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Engineering Fracture Mechanics21(1): 31–48.
12.
KeinänenHMoilanenSToivolaJ (2012) Influence of rotating band construction on gun tube loading – Part I: Numerical approach. Journal of Pressure Vessel Technology134(4): 041006.
13.
Fisher EB (1979) Research test techniques applied to gun interior ballistics. In: Krier H and Summerfield M (eds) Interior Ballistics of Guns, Progress in Astronautics and Aeronautics, Vol. 66. New York: AIAA, pp.281–306.
14.
MontgomeryRS (1976) Friction and wear at high sliding speeds. Wear36(3): 275–298.
15.
Qierbarov EB [trans Yang JR] (1997) Interior ballistics and engraving force calculation during engraving of projectile. Beijing: National Defense Industry Press.
16.
RosakisPRosakisAJRavichandranG (2000) A thermodynamic internal variable model for the partition of plastic work into heat and stored energy in metals. Journal of the Mechanics and Physics of Solids48(3): 581–607.
17.
SunHYMaJSLiW (2011) Influence of different bore structures on engraving process on projectile. Journal of Vibration and Shock30(3): 30–33.
18.
SunHYMaJSLiW (2012) Study on influence of bore structure on gun’s interior ballistic performances. Acta Armamentarii33(6): 669–675.
19.
Sun QZ, Yang GL, Ge JL, et al. (2014) Numerical research on rotating band engraving process of a large-caliber howitzer under two different charge conditions. In: Batra RC, Qian LF, Yuan JT, et al. (eds.) Proceedings of the 5th international conference on mechanical engineering and mechanics, Yangzhou, China, 20–22 August, pp.193–198. New Jersey, USA: Science Press USA Inc.
20.
SunQZYangGLWangP (2015) Numerical research on rotating band engraving process of a large-caliber howitzer. Acta Armamentarii36(2): 206–213.
21.
TaoCZhangYLiS (2010) Mechanism of interior ballistic peak phenomenon of guns and its effects. Journal of Applied Mechanics77(5): 051405.
22.
ToivolaJMoilanenSTervokoskiJ (2012) Influence of rotating band construction on gun tube loading – Part II: Measurement and analysis. Journal of Pressure Vessel Technology134(4): 041007.
23.
Woodley C, Carriere A, Franco P, et al. (2007) Comparisons of internal ballistics simulations of 40 mm gun firings. In: Gálvez F and Sánchez-Gálvez V (eds). Proceedings of the 23rd international symposium on ballistics, Tarragona, Spain, 16-20 April, pp. 359-367. Tarragona, Spain: International Ballistics Society.
24.
WuBFangLHChenXL (2014a) Fabricating aluminum bronze rotating band for large-caliber projectiles by high velocity arc spraying. Journal of Thermal Spray Technology23(3): 447–455.
25.
WuBZhengJTianQT (2014b) Friction and wear between rotating band and gun barrel during engraving process. Wear318(1): 106–113.
26.
Wu B, Zheng J, Tian QT, et al. (2014c) Tribology of rotating band and gun barrel during engraving process under quasi-static and dynamic loading. Friction 2(4): 330–342.
27.
ZhangXFLuXH (2001) Interior ballistics of erosion guns, Beijing: National Defense Industry Press.
28.
ZhouYHWangSC (1990) Practical two-phase flow interior ballistics, Beijing: The Publishing House of Ordnance Industry.
