Research on method for adaptive imbalance vibration control for rotor of variable-speed mscmg with active-passive magnetic bearings

Abstract

Imbalance vibration control for rotor is the main factor affecting attitude control performance for satellite using magnetically suspended control moment gyro (MSCMG). The method for adaptive imbalance vibration control for the rotor of variable-speed MSCMG with active-passive magnetic bearings is investigated in this paper. Firstly, on the basis of feedforward compensation, a rotor model for the imbalance vibration of variable-speed MSCMG with active-passive magnetic bearings is built, and the main factor affecting imbalance vibration compensation is also analyzed. Then, power amplifier parameter modifier with control switches is designed to eliminate the effects of time-varying parameters on the imbalance vibration compensation precision. The adaptive imbalance vibration control based on this modifier not only has high compensation precision, but also can control the frequency of parameter adjustment according to the compensation precision. Besides, since the passive magnetic bearing displacement stiffness of the rotor of variable-speed MSCMG with active-passive magnetic bearings cannot be obtained accurately, displacement stiffness modifier is employed. Finally, stability analysis is made on the imbalance vibration control system, and the range of rotation speed to ensure system stability is derived. Simulation results show that, imbalance vibration control method proposed in this paper can suppress the imbalance vibration of the rotor of variable-speed MSCMG with active-passive magnetic bearings effectively and has high precision.

Keywords

Imbalance vibration control magnetic bearings active-passive MSCMG adaptive

Get full access to this article

View all access options for this article.

References

Betschon

Knospe

(2001) Reducing magnetic bearing currents via gain scheduled adaptive control. IEEE Transactions on Mechatronics 6: 437–14.

Fang

Ren

(2012) Self-adaptive phase-lead compensation based on unsymmetrical current sampling resistance network for magnetic bearing switching power amplifiers. IEEE Transactions on Industrial Electronics 59: 1218–1227.

Fang

Tang

(2013a) Adaptive complete suppression of imbalance vibration in AMB systems using gain phase modifier. Journal of Sound and Vibration 332: 6203–6215.

Fang

Xie

(2013b) Active vibration control of rotor imbalance in active magnetic bearing systems. Journal of Vibration and Control. DOI: 101177/1077546313488792.

Han

Cui

Tang

(2012) Research on active vibration control of magnetic bearing based on sliding mode disturbance observer. Precision Engineering of Optics 20: 563–570.

Han

Fang

Guo

(2008) Analysis and experiment of the motion characteristics of rotor of MSCMG affected by imbalance mass. Journal of Astronautics 29: 585–589.

Huang

Lin

(2004) Fuzzy dynamic output feedback control with adaptive rotor imbalance compensation for magnetic bearing systems. IEEE Transactions on Systems, Man and Cybernetics, Part B: Cybernetics 34: 1854–1864.

Husain AR, Ahmad MN and Mohdyatim AH (2007) Sliding mode control with linear quadratic hyperplane design: an application to an active magnetic bearing system. Proceedings of the 5th Student Conference on Research and Development, Selangor, Malaysia, pp. 11–12.

Jiang

Zhu

Tang

(2012) A uniform control method for imbalance compensation and automation balancing in active magnetic bearing-rotor systems. Journal of Dynamic Systems, Measurement, and Control 134: 021006–1-13.

10.

Lee W, Oh SS and Cheong D (2011) Rotor unbalance compensation without angular position sensor for active magnetic bearing. Proceedings of the 8th International Conference on Power Electronics, Korea: Shilla Jeju, pp. 2446–2449.

11.

Shinshi

Zhang

(2003) Compensation of rotor imbalance for precision rotation of a planar magnetic bearing rotor. Precision Engineering 27: 140–150.

12.

Nezamabadi R, Poshtan J and Motlagh MRJ (2006) Robust control design to imbalance compensation and automatic balancing of magnetic bearings. Proceedings of the IEEE International Conference on Industrial Technology, Mumbai, India, pp. 1093–1098.

13.

Queiroz

MSD

(2009) An active identification method of rotor unbalance parameters. Journal of Vibration and Control 15: 1365–1374.

14.

Shi J, Zoomd R and Qin LJ, et al. (2002) The direct method for adaptive feed-forward vibration control of magnetic bearing systems. Seventh International Conference on Control, Automation, Robotics and Vision, Singapore, pp. 675–680.

15.

Tang

Chen

(2009) Model development and adaptive imbalance vibration control of magnetic suspended system. Acta Astronautica 65: 1506–1514.

16.

Tang

Liu

Fang

(2013) Suppression of vibration caused by residual unbalance of rotor for magnetically suspended flywheel. Journal of Vibration and Control 19: 1962–1979.

17.

Townsend

Summers

Betz

(2012) Multigoal heuristic model predictive control technique applied to a cascaded H-bridge StatCom. IEEE Transactions on Power Electronics 27: 1191–1200.

18.

Wei

Xiang

(2012) Autobalancing for magnetically suspended high-speed rotors based on lead feedforward compensation for displacement stiffness force. Journal of Mechanical Engineering 48: 184–191.

19.

Fang

Cui

(2013) Active suppression of imbalance vibration in the magnetically suspended control moment gyro. Journal of Vibration and Control. DOI: 101177/1077546313494955.

20.

Zhou

Zhang

Wang

(2006) High-performance repetitive control of PWM DC-AC converters with real-time phase-lead FIR filter. IEEE Transactions on Circuits Sys. II, Express Briefs 53: 768–772.