In this paper an analytical, exact procedure for the reconstruction of simply supported bending vibrating beams having given values of the first N natural frequencies is presented. The results hold for beams in which the product between the bending stiffness and the linear mass density is constant. The analysis is based on the fact that this class of beams is spectrally equivalent to a family of strings fixed at the ends, and uses recent results on the exact construction of second-order Sturm–Liouville operators with prescribed natural frequencies. The analysis can be adapted to beams with pinned–sliding and sliding–sliding ends.
BarcilonV (1974) On the uniqueness of inverse eigenvalue problems. Geophysical Journal of the Royal Astronomical Society38: 287–298.
2.
CaddemiSCalióI (2009) Exact closed-form solution for the vibration modes of the Euler–Bernoulli beam with multiple open cracks. Journal of Sound and Vibration327(3–5): 473–489.
3.
CalióIElishakoffI (2005) Closed form solutions for axially graded beam columns. Journal of Sound and Vibration280: 1083–1094.
4.
CalióIGladwellGMLMorassiA (2011) Families of beams with a given buckling spectrum. Inverse Problems27(4): 045006–045006.
5.
CapecchiDVestroniF (1993) Identification of finite element models in structural dynamics. Engineering Structures15: 21–30.
6.
CapecchiDVestroniF (2000) Monitoring of structural systems by using frequency data. Earthquake Engineering & Structural Dynamics28: 447–461.
7.
DarbouxG (1882) Sur la répresentation sphérique des surfaces. Comptes Rendus de l’Académie des Sciences94: 1343–1345.
8.
DilenaMMorassiA (2003) A damage analysis of steel-concrete composite beams via dynamic methods. Part II: Analytical models and damage detection. Journal of Vibration and Control9: 529–565.
9.
DilenaMMorassiA (2010) Reconstruction method for damage detection in beams based on natural frequency and antiresonant frequency measurements. Journal of Engineering Mechanics ASCE136: 329–344.
FriswellMIMottersheadJE (1995) Finite Element Model Updating in Structural Dynamics, Dordrecht: Kluwer Academic Publishers.
12.
GladwellGMLMorassiA (1995) On isospectral rods, horns and strings. Inverse Problems11: 533–554.
13.
GladwellGMLMorassiA (2010) A family of isospectral Euler–Bernoulli beams. Inverse Problems26: 035006–035006.
14.
MorassiA (2011) Quasi-isospectral systems. In: XX Italian congress on theoretical and applied mechanics AIMETA. Bologna, Italy, 12–15 September 2011, p. 305.
15.
MottersheadJERamYM (2006) Inverse eigenvalue problems in vibration absorption: Passive modification and active control. Mechanical Systems and Signal Processing20: 5–44.
16.
NatkeHG (1982) Identification of Vibrating Structures, New York: Springer.
17.
PauAGrecoAVestroniF (2011) Numerical and experimental detection of concentrated damage in a parabolic arch by measured frequency variations. Journal of Vibration and Control17(4): 605–614.
SohCW (2009) Isospectral Euler–Bernoulli beams via factorization and the Lie method. International Journal of Non-Linear Mechanics44: 396–403.
20.
VestroniFCapecchiD (1996) Damage evaluation in cracked vibrating beams using experimental frequencies and finite element models. Journal of Vibration and Control2: 69–86.
