The active vibration attenuation of a built-in motorized milling spindle

Abstract

An active vibration control scheme is proposed for suppressing the vibration of the high-speed induction electric spindle with a built-in force actuator to improve the performance of high-speed milling system. The built-in force actuator is a set of windings, which are added to the stator of electric spindle motor. An improved fast block least mean square (FBLMS) adaptive filter is adopted to produce the reference control force, which is used to obtain the control current of force actuator, and then a controlled, non-contact electromagnetic control force on the electric spindle is produced by the force actuator to control actively chatter, unbalanced vibration and disturbance signals of milling system. The built-in motorized spindles dynamic is modeled by means of the finite element method, the dynamic milling, the air gap excitation current of torque and radial electromagnetic control force are modeled, the control force coefficient and the unbalanced magnetic pull force coefficient are identified by finite element analysis, and then the active vibration control scheme for the flexible induction electric spindle is designed. The vibration, with a different frequency component, is investigated. The results show that the improved FBLMS adaptive filter and the proposed active control scheme have an obvious effect on suppressing the spindle chatter, unbalanced vibration and other frequency vibration components in the built-in motorized milling spindle.

Keywords

Chatter force actuator unbalanced vibration vibration suppression

Get full access to this article

View all access options for this article.

References

Altintas

Budak

(1995) Analytical prediction of stability lobes in milling. Manufacturing Technology 44: 357–362.

Behbahani S, Tabatabaei SMK and Sajedipour D (2010) Controller design for chatter reduction using genetic algorithm method. In: 2010 8th IEEE International Conference on Control and Automation, ICCA 2010, 9--11 June 2010. Xiamen, China: IEEE Computer Society.

Cai

Huang

(2007) The air gap field identification methods and application of bearingless induction motors. Electric Machines and Control 11: 116–124.

Chiba

Fukao

Ichikawa

(2005) Magnetic Bearings and Bearingless Drives, Leeds, UK: Newins.

Dmochowski

McLane

(2001) Frequency domain equalization for high data rate multipath channels. Proceedings of IEEE Pacific Rim Conference on Communications, Computers and Signal Processing, PACRIM. Aug 26–28534–537.

Dyer

(2001) Adaptive influence coefficient control of single-plane active balancing systems for rotating machinery. Journal of Manufacturing Science and Engineering - Transactions of the ASME 123: 291–298.

Fan

Jing

Liu

(2011) Program design of an online dynamic balancing system for grinding-wheel and spindle. Proceedings of IEEE International Conference on Computer Science and Automation Engineering (CSAE). June 10–12. Shanghai, People’s Republic of China173–177.

Haykin S (2002) Adaptive filter theory. Fourth edition. Upper Saddle River, NJ: Prentice Hall, pp. 43--56.

Jiang

Zhu

(2011) Multi-frequency periodic vibration suppressing in active magnetic bearing-rotor systems via response matching in frequency domain. Mechanical Systems and Signal Processing 25: 1417–1429.

10.

Katou

Chiba

Fukao

(2007) Magnetic suspension force in an induction bearingless motor with a squirrel cage rotor. Electrical Engineering in Japan 159: 77–87.

11.

Khadija

Majda

Said

(2012) New discrete multivariable sliding mode control for multi-periodic disturbance signals rejection. International Journal of Control Science and Engineering 2: 7–15.

12.

Kim

Lee

Koo

(2008) Design and modeling of semi-active squeeze film damper using magneto-rheological fluids. Smart Materials and Structures 17: 45–55.

13.

Long

Balachandran

(2010) Stability of up-milling and down-milling operations with variable spindle speed. Journal of Vibration and Control 16: 1151–1168.

14.

Lum

Bernstein

Coppola

(1996) Adaptive auto centering control for an active magnetic bearing supporting a rotor with unknown mass imbalance. IEEE Transactions on Control Systems Technology 4: 587–597.

15.

Mei

Yao

Kong

(2010) Parameter optimization of time-varying stiffness method for chatter suppression based on magnetorheological fluid-controlled boring bar. International Journal of Advanced Manufacturing Technology 46: 1071–1083.

16.

Moon

Kim

Lee

(2006) Development of the active balancing device for high-speed spindle system using influence coefficients. International Journal of Machine Tools & Manufacture 46: 978–987.

17.

Palazzolo

Jagannathan

Kascak

(1993) Hybrid active vibration control of rotor bearing systems using piezoelectric actuators. Journal of Vibration, Acoustics, Stress, and Reliability in Design 115: 111–119.

18.

Qiao

Zhu

(2012) Active control of milling chatter based on the built-in force actuator. Chinese Journal of Mechanical Engineering 48: 185–192.

19.

Radecki

Farinholt

(2010) Vibration suppression in cutting tools using a collocated piezoelectric sensor/actuator with an adaptive control algorithm. Journal of Vibration and Acoustic 132: 1–8.

20.

Rahman

MZU

Shaik

Reddy

(2009) Denoising ECG signals using transform domain adaptive filtering technique. Proceedings of the Annual IEEE India Conference (INDICON 2009). Dec. 18–20. Ahmedabad, India1–4.

21.

Wang

Fei

(2002) Research on monitored control of machining chatter based on electrorheological fluids. Chinese Journal of Mechanical Engineering 38: 93–97.

22.

Yang

Munoa

Altintas

(2010) Optimization of multiple tuned mass dampers to suppress machine tool chatter. International Journal of Machine Tools and Manufacture 50: 834–842.