In this paper, a falling-weight impact test using full scale arch type reinforced concrete (RC) structures was conducted to verify a proposed impact response analysis method. The applicability of the numerical analysis method was confirmed by comparison with the experimental results. The validity of the current impact resistant design procedure to the performance based design procedure was investigated using the proposed numerical analysis method. From this study, it is confirmed that by applying the current impact resistant design procedure, a performance based impact resistant design with a sufficient safety margin may be obtained for the full scale arch type RC structures.
BhattiAQKishiN (2010) Constitutive model for absorbing system of RC girders used in rock-sheds under falling weight impact loading test. Journal of Nuclear Engineering and Design240(10): 2626–2632.
2.
BhattiAQKishiN (2011) An application of impact-response analysis on small-scale RC arch-type beams without stirrups. Construction and Building Materials Journal25(10): 3972–3976.
3.
BhattiAQKishiNMikamiH (2011) An applicability of dynamic response analysis of shear failure type RC beams with lightweight aggregate concrete under falling-weight impact loading. Materials and Structures Journal44(1): 221–231.
4.
BhattiAQKishiNKonnoHMikamaiH (2010) Elasto-plastic dynamic response analysis of prototype RC girder under falling-weight impact loading considering mesh sizeeffect. Structure and Infrastructure Journal00: 1–11 (available online 28 June 2010), DOI: 10.1080/15732479.2010.492838.
5.
BhattiAQKishiNMikamiHand AndoT (2009) Elasto-plastic impact response analysis of shear-failure type RC beams with shear rebars. Materials & Design Journal30(2): 502–510.
6.
DelhommeFMommessinMMouginJPPerrotinP (2005) Behavior of a structurally dissipating rock-shed: experimental analysis and study of punching effects. International Journal of Solids and Structures42(14): 4204–4219.
KishiNBhattiAQ (2010) An equivalent fracture energy concept for nonlinear dynamic response analysis of prototype RC girders subjected to falling-weight impact loading. International Journal of Impact Engineering37(1): 103–113.
9.
KishiNKonnoH (2003) Numerical analysis model for three layer absorbing system under falling weight impact loading. JSCE Journal of Structural Engineering49(A): 1323–1332.
10.
MasuyaHMitakeYKajikawaY (1991) Test of rock falls on steel rock shed and distributive energy of rock shed. JSCE Journal of Structural Engineering37(A): 1627–1636.
11.
Nakano O, Sato M, Kishi N, Matsuoka KG and Nomachi SG (1995) Full scale impact tests of PC multi-girder with three-layered absorbing system. In Transactions of the 13th International Conference on Structural Mechanics in Reactor Technology (SMiRT 13), Escola de Engenharia - Universidade Federal do Rio Grande do Sul, Porto Alegre, Brazil, August 13-18: pp. 201–206.
12.
Polanco-LoriaMHopperstadOSBørvikTBerstadT (2008) Numerical predictions of ballistic limits for concrete slabs using a modified version of the HJC concrete model. International Journal of Impact Engineering35(5): 290–303.
13.
YokoyamaKOhiraMYoshidaH (1993) Impulsive properties due to rock fall on a steel rock-shed. JSCE Journal of Structural Engineering39(A): 1573–1586.
