This work deals with active vibration control of a rotating machine in both steady state and transient motion. Two stacks of piezoelectric ceramic orthogonally arranged in a plane localized at one of the bearings were used as the control actuators, using a modal control strategy. The optimal controller LQR was used to calculate the control gain, working together with an LQE observer that estimates the modal state. Simulation carried out on FEM model suggested the feasibility of the control strategy, and experimental tests using a physical test rig show good agreement with the numerical results, and confirm the efficiency of the strategy.
Alizadeh, A. , Ehmann, C. , Schönhoff, U. , and Nordmann, R. , 2003, “Active bearing of rotors utilizing robust controlled piezo actuators,”Proceedings of DETC’03, Chicago, Illinois, September 2-6.
2.
Barret, T. S. , Palazzolo, A. B. , and Kascak, A. F. , 1995, “Active vibration control of rotating machinery using piezoelectric actuators incorporating flexible casing effects,”Journal of Engineering for Gas Turbines and Power117(1), 176-187 .
3.
Burrows, C. R. and Sahinkaya, M. N. , 1984, “Vibration control of multi-mode rotor bearing systems,”Proceedings of the Royal Society of London386, 77-94 .
4.
Chu, F. and Holmes, R. , 2000, “The damping capacity of the squeeze film damper in suppressing vibration of a rotating assembly,”Tribology International33, 81-97 .
5.
Der Hagopian, J. , Gaudiller, L. , Alauze, C. , and Voinis, P. , 1999, “Synchronous control of large shafts lines by active balancing,”Proceedings of Eurodyname ’99, Ulm, Germany, July 11-16, pp. 37-43 .
6.
Dutt, J. K. and Toi, T. , 2003, “Rotor vibration reduction with polymeric sectors,”Journal of Sound and Vibration262, 769-793 .
7.
Fürst, S. and Ulbrich, H. , 1984, “An active support system for rotors with oil-film bearings,”ImechE International Conference on Vibrations in Rotating Machinery, England, pp. 61-67 .
8.
Gaudiller, L. and Der Hagopian, J. , 1996, “Active control of flexible structures using a minimum number of components,”Journal of Sound and Vibration193(3), 713-741 .
9.
Hagemeister, W. , 1999, “Piezoelektrisch vorgesteuertes 3/3-wegeservoventil,”Ölhydraulik und Pneumatik43(7), 538-543 .
10.
Horst, H.-G. and Wölfel, H. P. , 2004, “Active vibration control of a high speed rotor using PZT patches on the shaft surface,”Journal of Intelligent Material Systems and Structures15, 721-728 .
11.
Inman, D. J. , 2001, Engineering Vibration, Prentice Hall, Upper Saddle River, NJ .
12.
Kwakernaak, H. and Sivan, R. , 1972, Linear Optimal Control Systems, Wiley, NewYork .
13.
Lalanne, M. and Ferraris, G. , 1998, Rotordynamics Prediction in Engineering, 2nd Edition, Wiley, New York .
14.
Lalanne, M. , Berthier, P. , and Der Hagopian, J. , 1983, Mechanical Vibration for Engineers, Wiley, Chichester, UK .
15.
Malhis, M. , Gaudiller, L. , and Der Hagopian, J. , 2002, “Fuzzy modal control of a flexible rotor by piezoeletric actuators arranged on a plane,”Proceedings of the Sixth International Conference on Rotor Dynamics, Sydney, Australia, September 30-October 4, Vol. 1, pp. 101-108 .
16.
Meirovitch, L. , 1992, Dynamics and Control of Structures, Wiley, NewYork .
17.
Ogata, K. , 1990, Modern Control Engineering, Prentice-Hall, New York .
18.
Palazzolo, A. B. , Jogannathan, S. , Kascak, A. F. , Montague, G. T. , and Kiraly, L. J. , 1993, “Hybrid active vibration control of rotor bearing systems using piezoelectric actuators,”Journal of Vibration and Acoustics115, 111-119 .
19.
Palazzolo, A. B. , Kascak, A. F. , Montague, G. T. , and Kiraly, L. J. , 1989, “Piezoelectric Pusher for Active Vibration Control of Rotating Machinery,”Transactions of the ASME111, 298-305 .
20.
Santos, I. F., 1993, Aktive Kippsegmentlagerung-theorie und experiment, Fortschritt-Berichte VDI reihe 11, 189.
21.
Santos, I. F. , 1994, “Design and evaluation of two types of active tilting-pad bearings,”Proceedings of the IUTAM Symposium on Active Control of Vibration, Bath, UK, pp. 79-87 .
22.
Schweitzer, G. and Lange, R. , 1976, “Characteristics of a magnetic rotor bearing for active vibration control,”ImechE Conference on Vibration in Rotating Machinery, Cambridge, Paper no. C239/76.
23.
Stanway, R. and Burrows, C. R. , 1981, “Active vibration control of a flexible rotor on flexible-mounted journal bearings,”ASME Journal of Dynamic Systems, Measurement and Control103, 383-388 .
24.
Tzou, H. S. , 1987, “Active vibration control of flexible structures via conserve piezoelectricity,”Proceedings of the 20th Midwestern Mechanics Conference, Developments in Mechanics, Vol. 14-c, pp. 1201-1206 .
25.
Yao, G. Z. , Qiu, Y. , Meng, G. , and Fang, T. , 1999, “Vibration control of a rotor system by disk type electrorheological damper,”Journal of Sound and Vibration219, 175-188 .
