In this paper, we consider a vibrating system with piezoelectric patches whose minimum vibration frequency is to be maximized subject to some constraint on the patch geometry. A numerical scheme is constructed based on the integral equation approach for the computation of the corresponding eigenvalue problem and the boundary parametrization optimization technique. Various numerical results are provided for the case of a Plexiglas plate with PVDF sensor and actuator patches.
Banks, H. T. , Smith, R. C. , and Wang, Y. , 1995, “The modeling of piezoceramic patch interactions with shells, plates and beams,”Quarterly of Applied Mathematics53 (2), 353-381 .
2.
Bruch, J. C. Jr , Sloss, J. M. , Sadek, I. S. , and Adali, S. , 2002, “Analytical solution technique for plate-patch piezoelectric sensor-actuator vibration control problems,” in Proceedings of SPIE, Smart Structures and Materials 2002, Modeling, Signal Processing and Control, San Diego, CA, March 18-21, pp. 104-111 .
3.
Burke, S. E. and Hubbard, J. E. Jr , 1991, “Distributed transducer vibration control of thin plates,”Journal of the Acoustical Society of America90 (2), 937-944 .
4.
Clark, R. L. and Fuller, C. R. , 1992, “Experiments on active control of structurally radiated sound using multiple piezoelectric actuators,”Journal of the Acoustical Society of America91, 3313-3320 .
5.
Halim, D. and Reza Moheimani, S. O. , 2003, “An optimization approach to optimal placement of collocated piezoelectric actuators and sensors on a thin plate,”Mechatronics13 (1), 27-47 .
6.
Hwang, W-S. , Hwang, W. , and Park, H. C. , 1994, “Vibration control of laminated composite plate with piezoelectric sensor/actuator: active and passive control methods,”Mechanical Systems and Signal Processing8 (5), 571-583 .
7.
Ip, K-H. and Tse, P-C. , 2001, “Optimal configuration of a piezoelectric patch for vibration control of isotropic rectangular plates,”Smart Materials and Structures10, 395-403 .
8.
Ishihara, M. and Noda, N. , 2003, “Control of mechanical deformation of a laminate by electrical load to piezoelectric actuator considering the effects of damping and transverse shear,”International Journal of Engineering Science41 (15), 1667-1684 .
9.
Koconis, D. B. , Kollar, L. P. , and Springer, G. S. , 1994, “Shape control of composite plates and shells with embedded actuators. II. Desired shape specified,”Journal of Composite Materials28, 459-482 .
10.
Lam K. Y. and Ng, T. Y. , 1999, “Active control of composite plates with integrated piezoelectric sensors and actuators under various dynamic loading conditions,”Smart Materials and Structures8, 223-237 .
11.
Li, Y. Y. , Cheng, L. , and Li, P. , 2003, “Modeling and vibration control of a plate coupled with piezoelectric material,”Composite Structures62 (2), 155-162 .
12.
Liew, K. M. , Sivashanker, S. , He, X. Q. , and Ng, T. Y.2003, “The modeling and design of smart structures using functionally graded materials and piezoelectrical sensor/actuator patches,”Smart Materials and Structures12, 647-655 .
13.
Lim, Y-H. , 2003, “Finite-element simulation of closed-loop vibration control of a smart plate under transient loading,”Smart Materials and Structures12, 272-286 .
14.
Lin, C. C. and Huang, H. N. , 1999, “Vibration control of beam-plates with bonded piezoelectric sensors and actuators,”Computers & Structures73, 239-248 .
15.
Lin, R. M. and Nyang, K. M. , 2003, “Analytical and experimental investigations on vibrational control mechanisms for flexible active structures,”Smart Materials and Structures12, 500-506 .
16.
Mukherjee, A. , Joshi, S. P. , and Ganguli, A. , 2002, “Active vibration control of piezolaminated stiffened plates,”Composite Structures55 (4), 435-443 .
17.
Osher, S. and Santosa, F. , 2001, “Level set methods for optimization problems involving geometry and constraints: I. Frequencies of a two-density inhomogeneous drum,”Journal of Computational Physics171 (1), 272-288 .
18.
Osher, S. and Sethian, J. , 1988, “Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations,”Journal of Computational Physics79, 12-49 .
19.
Qu, Z-Q. , 2001, “An efficient modeling method for laminated composite plates with piezoelectric sensors and actuators,”Smart Materials and Structures10, 807-818 .
20.
Rudin, L. , Osher, S. , and Fatemi, E. , 1992, “Nonlinear total variation based noise removal algorithms,”Physica D60 (1-4), 259-268 .
21.
Sloss, J. M. , Bruch, J. C. Jr , Adali, S. , and Sadek, I. S. , 2001, “Piezoelectric patch control using an integral equation approach,”Thin-Walled Structures39, 45-63 .
22.
Sullivan, J. M. , Hubbard, J. E. Jr , and Burke, S. E. , 1996, “Modeling approach for two-dimensional distributed transducers of arbitrary spatial distribution,”Journal of the Acoustical Society of America99 (5), 2965-2974 .
23.
Sullivan, J. M. , Hubbard, J. E. Jr , and Burke, S. E. , 1997, “Distributed sensor/actuator design for plates: Spatial shape and shading as design parameters,”Journal of Sound and Vibration203 (3), 473-493 .
24.
Tzou, H. S. , 1992, “A new distributed sensor and actuator theory for intelligent shells,”Journal of Sound and Vibration2, 335-350 .
25.
Tzou, H. S. , 1993, Piezoelectric Shells, Kluwer Academic, Dordrecht .
26.
Wang, S. Y. , Quek, S. T. , and Ang, K. K. , 2001, “Vibration control of smart piezoelectric composite plates,”Smart Materials and Structures10, 637-644 .
27.
Xu, S.X. and Koko, T.S. , 2004,“Finite element analysis and design of actively controlled piezoelectric smart structures,”Finite Elements in Analysis and Design, 40, 241-262 .
28.
Zhang, J., 2002, Plate Patch Piezoelectric Control, PhD Dissertation, Department of Mathematics, University of California, Santa Barbara, CA.
29.
Zhang, J. , 2003, “Level set method for shape optimization of plane piezoelectric patches,”Methods and Applications of Analysis10 (2), 329-346 .
