We review crane models available in the literature, classify them, and discuss their applications and limitations. A generalized formulation of the most widely used crane model is analyzed using the method of multiple scales. We also review crane control strategies in the literature, classify them, and discuss their applications and limitations. In conclusion, we recommend appropriate models and control criteria for various crane applications and suggest directions for further work.
Get full access to this article
View all access options for this article.
References
1.
Abdel-Rahman, E. M. and Nayfeh, A. H., 2000, “Cargo-pendulation reduction in boom cranes via cable-length manipulation,” in Proceedings of the 41th Structures, Structural Dynamics, and Materials Conference, Atlanta, GA, AIAA-2000-1541.
2.
Abdel-Rahman, E. M. and Nayfeh, A. H., 2001, “Feasibility of two-dimensional control for ship-mounted cranes,” in DETC2001 Proceedings of the ASME Design Engineering Technical Conferences, Pittsburgh, PA, DETC2001/VIB-21454.
3.
Ackermann, J., 1980, “Parameter space design of robust control systems,” IEEE Transactions on Automatic Control25(6), 1058-1072 .
4.
Alli, H. and Singh, T., 1999, “Passive control of overhead cranes,” Journal of Vibration and Control5, 443-459 .
5.
Almousa, A. A., Nayfeh, A. H., and Kachroo, P., 2001, “Control of rotary cranes using fuzzy logic,” in DETC2001 Proceedings of the ASME Design Engineering Technical Conferences, Pittsburgh, PA, DETC2001/VIB-21598.
6.
Alsop, C. F., Forster, G. A., and Holmes, F. R., 1965, “Ore unloader automation - A feasibility study,” in Proceedings of IFAC Workshop on Systems Engineering for Control Systems, Tokyo, Japan, pp. 295-305 .
7.
Alzinger, E. and Brozovic, V., 1983, “Automation and control system for grab cranes,” Brown Boveri Review7(9/10), 351-356 .
8.
Auernig, J. W. and Troger, H., 1987, “Time optimal control of overhead cranes with hoisting of the load,” Automatica23(4), 437-447 .
9.
Balachandran, B. and Li, Y., 1997, “A mechanical filter concept to suppress crane load oscillations,” in DETC 97 Proceedings of the ASME Design Engineering Technical Conferences, Sacramento, CA, DETC97/VIB-4091.
10.
Balachandran, B., Li, Y., and Fang, C., 1999, “A mechanical filter concept for control of non-linear crane-load oscillations,” Journal of Sound and Vibration228(3), 651-682 .
11.
Beeston, J. W., 1969, “Closed-loop time optimal control of a suspended load: A design study,” in Proceedings of the IFAC 4th World Congress, Warsaw, Poland, Paper No 39.5, pp. 85-99 .
12.
Bostelman, R. V. and Goodwin, K., 1999, Survey of Cargo Handling Research, Intelligent Systems Division, NIST, Gaithersburg, MD .
13.
Bourdache-Siguerdidjane, H., 1993, “Application of Fliess linearization to multiple output nonlinear systems: Some remarks,” in Proceedings of the 2nd European Control Conference: ECC 93, Groningen, The Netherlands, pp. 1191-1194 .
14.
Bourdache-Siguerdidjane, H., 1995, “Optimal control of a container crane by Fliess linearization,” Journal of Computer and Systems Sciences International33(5), 82-88 .
15.
Boustany, F. and d'Andrea-Novel, B., 1992, “Adaptive control of an overhead crane using dynamic feedback linerization and estimation design,” in Proceedings of the IEEE International Conference on Robotics and Automation, Nice, France, pp. 1963-1968 .
16.
Brkić, A. D., Tošić, S. B., Ostrić, D. Z., and Zrnić, N. D., 1998, “Influence of load swinging to the dynamic behaviour of tower crane,” in TEHNO 98: Proceedings of the Conference of Manufacturing Engineering, Timisoara, Romania, pp. 581-588 .
17.
Burg, T., Dawson, D., Rahn, C., and Rhodes, W., 1996, “Nonlinear control of an overhead crane via the saturating control approach of Teel,” in Proceedings of the IEEE International Conference on Robotics and Automation, Minneapolis, MN, pp. 3155-3160 .
18.
Butler, H., Honderd, G., and Van Amerongen, J., 1991, “Model reference adaptive control of a gantry crane scale model,” IEEE Control Systems Magazine11(1), 57-62 .
Caron, B., Perrad, P., and Rozinoer, J., 1989, “Reference model control of a variable length overhead crane,” in Low Cost Automation: Techniques, Components, Instruments, and Applications, Milan, Italy , pp. 475-480.
21.
Champion, V., 1989, “Swayed by the arguments,” Cargo Systems International16(8), 63-67 .
22.
Cheng, C.-C. and Chen, C.-Y., 1996, “Controller design for an overhead crane system with uncertainty,” Control Engineering Practice4(5), 645-653 .
23.
Chin, C. and Nayfeh, A. H., 1996, “Nonlinear dynamics of crane operation at sea,” in Proceedings of the 37th Structures, Structural Dynamics, and Materials Conference, Salt Lake City, UT, AIAA-96-1485.
24.
Chin, C., Nayfeh, A. H., and Abdel-Rahman, E., 2001, “Nonlinear dynamics of a boom crane,” Journal of Vibration and Control7, 199-220 .
25.
Chin, C., Nayfeh, A. H., and Mook, D. T., 1998, “Dynamics and control of ship-mounted cranes,” in Proceedings of the 39th Structures, Structural Dynamics, and Materials Conference, Long Beach, CA, AIAA-98-1731.
26.
Corriga, G., Giua, A., and Usai, G., 1998, “An implicit gain-scheduling controller for cranes,” IEEE Transactions on Control Systems Technology6(1), 15-20 .
27.
d'Andrea-Novel, B. and Boustany, F., 1991a, “Adaptive control of a class of mechanical systems using linearization and Lyapunov methods. A comparative study on the overhead crane example,” in Proceedings of the 30th Conference on Decision and Control, Brighton, UK, pp. 120-125 .
28.
d'Andrea-Novel, B. and Boustany, F., 1991b, “Control of an overhead crane: Feedback stabilization of an hybrid PDE-ODE system,” in Proceedings of the 1st European Control Conference: ECC 91, Grenoble, France, pp. 2244-2249 .
29.
d'Andrea-Novel, B., Boustany, F., and Conrad, F., 1990, “Control of an overhead crane: Stabilization of flexibilities,” in Boundary Control and Boundary Variation: Proceedings of the IFIP WG 7.2 Conference, Sophia Antipolis, France, pp. 1-26 .
30.
d'Andrea-Novel, B., Boustany, F., Conrad, F., and Rao, B. P., 1994, “Feedback stabilization of a hybrid PDE-ODE system: Application to an overhead crane,” Mathematics of Control, Signals, and Systems7, 1-22 .
31.
d'Andrea-Novel, B. and Lévine, J., 1989, “Modeling and nonlinear control of an overhead crane,” in Proceedings of the International Symposium MTNS-89 Vol. 2, pp. 523-529 .
32.
Dadone, P. and VanLandingham, H. F., 1999, “The use of fuzzy logic for controlling Coulomb friction in crane swing alleviation,” Intelligent Engineering Systems through Artificial Neural Networks9, 751-756 .
33.
Dadone, P. and VanLandingham, H. F., 2001, “Load transfer control for a gantry crane with arbitrary delay constraints,” Journal of Vibration and Control7, in press.
34.
Dadone, P., Lacarbonara, W., Nayfeh, A. H., and van Landinbgham, H.F., 2001, “Payload pendulation reduction using a VGT architecture with LQR and fuzzy controls,” Journal of Vibration and Control7, in press.
35.
DeSantis, R. M. and Krau, S., 1994, “Bang bang motion control of a Cartesian crane,” Robotica12, 449-454 .
36.
Ebeid, A. M., Moustafa, K. A. F., and Emara-Shabaik, H. E., 1992, “Electromechanical modelling of overhead cranes,” International Journal of Systems Science23(12), 2155-2169 .
37.
Elling, R. E. and McClinton, A. T., 1973, “Dynamic loading of shipboard cranes,” in IEEE International Conference on Engineering in the Ocean Environment: Ocean 73, Seattle, WA, pp. 174-177 .
38.
Field, J. A., 1961, “The optimization of the performance of an ore bridge,” Transactions of the Engineering Institute of Canada5(3), 163-169 .
39.
Fliess, M, Lévine, J., and Rouchon, P., 1991, “A simplified approach of crane control via a generalized state-space model,” in Proceedings of the 30th Conference on Decision and Control, Brighton, UK, pp. 736-741 .
40.
Fliess, M, Lévine, J., and Rouchon, P., 1993, “Generalized state variable representation for a simplified crane description,” International Journal of Control58(2), 277-283 .
41.
Golafshani, A. R., and Aplevich, J. D., 1995, “Computation of time-optimal trajectories for tower cranes,” in Proceedings of the IEEE Conference on Control Applications, Albany, NY, pp. 1134-1139 .
42.
Grassin, N., Retz, T., Caron, B., Bourles, H., and Irving, E., 1991, “Robust control of a travelling crane,” in Proceedings of the 1st European Control Conference: ECC 91, Grenoble, France, pp. 2196-2201 .
43.
Greenwood, D. T., 1988, Principles of Dynamics, Prentice-Hall, New Jersey .
44.
Gustafsson, T., 1995, “Modelling and control of a rotary crane,” in Proceedings of the 3rd European Control Conference: ECC 95, Roma, Italy, pp. 3805-3810 .
45.
Hämäläinen, J. J., Marttinen, A., Baharova, L., and Virkkunen, J., 1995, “Optimal path planning for a trolley crane: fast and smooth transfer of load,” IEE Proceedings. Control Theory and Applications142(1), 51-57 .
46.
Hara, K., Yamamoto, T., Kobayashi, A., and Okamoto, M., 1989, “Jib crane control to suppress load swing,” International Journal of Systems Science20(5), 715-731 .
47.
Hazlerigg, A. D. G., 1972, “Automatic control of crane operations,” in Proceedings of the IFAC 5th World Congress Vol. 1, Paris, France, Paper No 11.3.
48.
Henry, R. J., Masoud, Z. N., Nayfeh, A. H., and Mook, D. T., 2001, “Cargo pendulation reduction on ship-mounted cranes via boom-luff angle actuation,” Journal of Vibration and Control7, in press.
49.
Hubbell, J. T., Koch, B., and McCormick, D., 1992, “Modern crane control enhancements,” in Ports 92, Seattle, WA , pp. 757-767.
50.
Hurteau, R. and DeSantis, R. M., 1983, “Microprocessor based adaptive control of a crane system,” in Proceedings of the 22nd IEEE Decision and Control Conference San Antonio, TX, Vol. 2, pp. 944-947 .
51.
Imazeki, M., Mutaguchi, M., Iwasaki, I., and Tanida, K., 1998, “Active mass damper for stabilizing the load suspended on floating crane,” IHI Engineering Review31(2), 60-69 .
52.
Ito, H., Senda, Y., and Fujimoto, H., 1978, “Dynamic behavior of a load lifted by a mobile construction-type crane,” Bulletin of the Japanese Society of Mechanical Engineers21(154), 600-608 .
53.
Itoh, O., Migita, H., Itoh, J., and Irie, Y., 1993, “Application of fuzzy control to automatic crane operations,” in Proceedings of the International Conference on Industrial Electronics, Control, and Instrumentation: IECON 93 Lahaina, HI, Vol. 1, pp. 161-164 .
54.
Itoh, O., Migita, H., Itoh, J., and Irie, Y., 1995, “KF dynamic fuzzy crane system,” in Proceedings of the IEEE International Conference on Fuzzy Systems Yokohama, Japan, Vol. 5, pp. 63-64 .
55.
Iwasaki, I., Tanida, K., Kaji, S., and Mutaguchi, M., 1997, “Development of an active mass damper for stabilizing the load suspended on a floating crane,” in DETC 97 Proceedings of the ASME Design Engineering Technical Conference, Sacramento, CA, DETC97/VIB-3816.
56.
Jones, J. F. and Petterson, B. J., 1988, “Oscillation damped movement of suspended objects,” in Proceedings of the IEEE International Conference on Robotics and Automation Philadelphia, PA, Vol. 2, pp. 956-962 .
57.
Joshi, S. and Rahn, C. D., 1995, “Position control of a flexible cable gantry crane: Theory and experiment,” in Proceedings of the American Control Conference, Seattle, WA, pp. 2820-2824 .
58.
Karihaloo, B. L. and Parbery, R. D., 1982, “Optimal control of dynamical system representing a gantry crane,” Journal of Optimization Theory and Applications36(3), 409-417 .
59.
Karnopp, B. H., Fisher, F. E., and Yoon, B. O., 1992, “A strategy for moving a mass from one point to another,” Journal of the Franklin Institute329(5), 881-892 .
60.
Kim, M. J. and Kang, G., 1993, “Design of fuzzy controller based on fuzzy model for container crane system,” in Proceedings of the 5th International Fuzzy Systems Association (IFSA) World Congress, Seoul, Korea, pp. 1250-1253 .
61.
Kimiaghalam, B., Homaifar, A., and Bikdash, M., 1998a, “Crane control using fuzzy controller,” in Proceedings of the World Automation Congress, Anchorage, AK, pp. 59.1-59.6 .
62.
Kimiaghalam, B., Homaifar, A., and Bikdash, M., 1998b, “Hybrid fuzzy-PD control for a dock mounted gantry crane,” in Proceedings of the NASA University Research Centers Huntsville, AL , Vol. 1, pp. 247-251 .
63.
Kimiaghalam, B., Homaifar, A., and Bikdash, M., 1998c, “Using genetic algorithms for optimal crane control,” in Proceeding of the NASA University Research Centers Huntsville, AL , Vol. 1, pp. 600-605 .
64.
Kimiaghalam, B., Homaifar, A., and Bikdash, M., 1998d, “Fuzzy dynamic friction controller for a ship crane,” in Proceedings of the 6th International Conference on Fuzzy Theory and Technology Research Triangle Park, NC, Vol. 1, pp. 203-206 .
65.
Kimiaghalam, B., Homaifar, A., and Bikdash, M., 1999a, “Pendulation suppression of a shipboard crane using fuzzy controller,” in Proceedings of the American Control Conference, San Diego, CA, Vol. 1, pp. 586-590 .
66.
Kimiaghalam, B., Homaifar, A., Bikdash, M., and Dozier, G., 1999b, “Genetic algorithms solution for unconstrained optimal crane control,” in Proceedings of the Congress on Evolutionary Computation Washington, DC, Vol. 3, pp. 2124-2130 .
67.
Kimiaghalam, B., Homaifar, A., and Bikdash, M., 2000a, “Feedback and feedforward control law for a ship crane with Maryland rigging system,” in Proceedings of the American Control Conference Chicago, IL, Vol. 2, pp. 1047-1051 .
68.
Kimiaghalam, B., Wen, B., Homaifar, A., and Bikdash, M., 2000b, “Modeling and control of a shipboard crane,” in Proceedings of the World Automation Congress, Maui, HI, Paper No ISIAC-143.
69.
Kościelny, R. and Wojciech, S., 1994, “Nonlinear vibration of the subsystem in various media conditions,” Structural Dynamics and Vibration63, 47-52 .
70.
Kral, R. and Kreuzer, E., 1995, “Dynamics of crane ships,” in Proceedings of the International Conference on Applied Dynamics, Hanoi, Vietnam, pp. 49-55 .
71.
Kral, R., Kreuzer, E., and Wilmers, C., 1996, “Nonlinear oscillations of a crane ship,” Zeitschrist fur Angewandte Mathematik und Mechanik76-S4, 5-8 .
72.
Kress, R. L., Jansen, J. F., and Noakes, M. W., 1994, “Experimental implementation of a robust damped-oscillation control algorithm on a full-sized, two-degree-of-freedom, AC induction motor-driven crane,” in Proceedings of the 5th International Symposium on Robotics and Manufacturing: Research, Education, and Applications: ISRAM 94, Maui, HI, pp. 585-592 .
73.
Kuntze, H.-B. and Strobel, H., 1975, “A contribution to adaptive time-optimal crane control,” in Proceedings of the IFAC 6th World Congress Boston, MA, Vol. 3, Paper No 4.5.
74.
Lee, H.-H., 1997, “Modeling and control of a 2-dimensional overhead crane,” in Proceedings of the ASME Dynamic Systems and Control Division Dallas, TX , DSC-Vol. 61, pp. 535-542 .
75.
Lee, H.-H., 1998, “Modeling and control of a three-dimensional overhead crane,” Journal of Dynamic Systems, Measurement, and Control120, 471-476 .
76.
Lee, H.-H., Cho, S.-K., and Cho, J.-S., 1997, “A new anti-swing control of overhead cranes,” in Proceedings of IFAC International Workshop on Automation in the Steel Industry (ASI 97), Kyongju, Korea, pp. 115-120 .
77.
Lévine, J., Rouchon, P., Yuan, G., Grebogi, C., Hunt, B. R., Kostelich, E., Ott, E., and Yorke, J. A., 1997, “On the control of US navy cranes,” in Proceedings of the European Control Conference: ECC 97, Brussels, Belgium, Paper No 717.
78.
Lewis, D., Parker, G. G., Driessen, B., and Robinett, R. D., 1998, “Command shaping control of an operator-in-the-loop boom crane,” in Proceedings of the American Control Conference, Philadelphia, PA, Vol. 5, pp. 2643-2647 .
79.
Lewis, D., Parker, G. G., Driessen, B., and Robinett, R. D., 1999, “Comparison of command shaping controllers for suppressing payload sway in a rotary boom crane,” in Proceedings of the IEEE International Conference on Control Applications, Kohal Coast, HI, Vol. 1, pp. 719-724 .
80.
Li, Y. and Balachandran, B., 1999, “Mechanical filters for control of crane-load oscillations,” MURI on Nonlinear Active Control of Dynamical Systems, Blacksburg, VA .
81.
Liang, Y. C. and Koh, K. K., 1997, “Concise anti-swing approach for fuzzy crane control,” Electronic Letters33(2), 167-168 .
82.
Maier, T. and Woernle, C., 1997, “Flatness-based control of underconstrained cable suspension manipulators,” in DETC 99 Proceedings of the ASME Design Engineering Technical Conferences, Las Vegas, NV, DETC99/VIB-8223.
83.
Manson, G. A., 1982, “Time-optimal control of an overhead crane model,” Optimal Control Applications and Methods3, 115-120 .
84.
Martindale, S. C., Dawson, D. M., Zhu, J., and Rahn, C. D., 1995, “Approximate nonlinear control for a two degree of freedom overhead crane: Theory and experimentation,” in Proceedings of the American Control Conference, Seattle, WA, pp. 301-305 .
85.
Marttinen, A., 1989, “Pole-placement control of a pilot gantry,” in Proceedings of the American Control Conference Pittsburgh, PA, Vol. 3, pp. 2824-2826 .
86.
Masoud, Z., Nayfeh, A., Henry, R., and Mook, D., 2000, “Cargo pendulation reduction on ship-mounted cranes via boom-luff and slew angles actuation,” in Proceedings of the 41th Structures, Structural Dynamics, and Materials Conference, Atlanta, GA, AIAA-2000-1543.
87.
McCormick, F. J. and Witz, J. A., 1993, “An investigation into the parametric excitation of suspended loads during crane vessel operations,” Underwater Technology19(3), 30-39 .
88.
Méndez, J. A., Acosta, L., Moreno, L., Hamilton, A., and Marichal, G. N., 1998, “Design of a neural network based self-tuning controller for an overhead crane,” in Proceedings of the IEEE International Conference on Control Applications, Trieste, Italy, pp. 168-171 .
89.
Méndez, J. A., Acosta, L., Torres, S., Moreno, L., Marichal, G. N., and Sigut, M., 1999, “A set of control experiments on an overhead crane prototype,” International Journal of Electrical Engineering Education36, 204-221 .
90.
Michelsen, F. C. and Coppens, A., 1988, “On the upgrading of SSCV Hermod to increase its lifting capacity and the dynamics of heavy-lift operations,” in Proceedings of the 20th Annual Offshore Technology Conference, Houston, TX, OTC 5820.
91.
Miles, J. W., 1962, “Stability of forced oscillations of a spherical pendulum,” Quarterly Applied Mathematics20, 21-32 .
92.
Miles, J. W., 1984, “Resonant motion of a spherical pendulum,” Physica D11, 309-323 .
93.
Moustafa, K. A. F., 1994, “Feedback control of overhead cranes swing with variable rope length,” in Proceedings of the American Control Conference, Baltimore, MD, pp. 691-695 .
94.
Moustafa, K. A. F. and Abu-El-Yazid, T. G., 1996, “Load sway control of overhead cranes with load hoisting via stability analysis,” International Journal of the Japanese Society of Mechanical Engineers, Series C39(1), 34-40 .
95.
Moustafa, K. A. F. and Ebeid, A. M., 1988, “Nonlinear modeling and control of overhead crane load sway,” Journal of Dynamic Systems, Measurement, and Control110, 266-271 .
96.
Moustafa, K. A. F. and Emara-Shabaik, H. E., 1992, “Control of crane load sway using a reduced order electromechanical model,” in Proceedings of the American Control Conference, Chicago, IL, pp. 1980-1981 .
97.
Nally, M. J. and Trabia, M. B., 1994, “Design of a fuzzy logic controller for swing-damped transport of an overhead crane payload,” in Proceedings of the ASME Dynamic Systems and Control Division, Chicago, IL , DSC-Vol. 58, pp. 389-398 .
98.
Nayfeh, A. H., 1973, Perturbation Methods, Wiley, New York .
99.
Nayfeh, A. H., 1981, Introduction to Perturbation Techniques, Wiley, New York .
100.
Nayfeh, A. H., 2000, Nonlinear Interactions, Wiley, New York .
101.
Nayfeh, A. H. and Balachandran, B., 1995, Applied Nonlinear Dynamics, Wiley, New York .
102.
Nayfeh, A. H. and Mook, D. T., 1979, Nonlinear Oscillations, Wiley, New York .
103.
Nguyen, H. T., 1994, “State-variable feedback controller for an overhead crane,” Journal of Electrical and Electronics Engineering, Australia14(2), 75-84 .
104.
Nguyen, H. T., Jackson, V., and Irvine, M., 1992, “Nonlinear digital controller for an offshore crane,” in Proceedings of the IEEE International Symposium on Industrial Electronics, Xian, China, Vol. 1, pp. 88-92 .
105.
Nguyen, H. T. and Laman, J., 1995, “Robust control of an overhead crane,” in Control 95 Melbourne, Australia , Vol. 1, pp. 235-238 .
106.
Noakes, M. W. and Jansen, J. F., 1990, “Shaping inputs to reduce vibration for suspended payloads,” in Proceedings of the 4th ANS Topical Meeting on Robotics and Remote Systems, Albuquerque, NM, pp. 141-150 .
107.
Noakes, M. W. and Jansen, J. F., 1992, “Generalized inputs for damped-vibration control of suspended payloads,” Robotics and Autonomous Systems10(2), 199-205 .
108.
Noakes, M. W., Kress, R. L., and Appleton, G. T., 1993, “Implementation of damped-oscillation crane control for existing AC induction motor-driven cranes,” in Proceedings of the 5th ANS Topical Meeting on Robotics and Remote Systems, Knoxville, TN, pp. 479-485 .
109.
Noakes, M. W., Petterson, B. J., and Werner, J. C., 1990, “An application of oscillation damped motion for suspended payloads to the advanced integrated maintenance system,” in Proceedings of the 38th Conference on Remote Systems Technology, San Francisco, CA, Vol. 1, pp. 63-68 .
110.
Nojiri, N. and Sasaki, T., 1983, “Motion characteristics of crane vessels in lifting operation,” in Proceedings of the 15th Annual Offshore Technology Conference, Houston, TX, OTC 4603.
111.
Ohnishi, E., Tsuboi, I., Egusa, T., and Uesugi, M., 1981, “Automatic control of an overhead crane,” in Proceedings of IFAC 8th Triennial World Congress, Kyoto, Japan, pp. 1885-1890 .
112.
Omar, H. M. and Nayfeh, A. H., 2001, “A simple adaptive feedback controller for tower cranes,” in DETC2001 Proceedings of the ASME Design Engineering Technical Conferences, Pittsburgh, PA, DETC2001/VIB-21606.
113.
Osiński, M. and Wojciech, S., 1994, “Dynamics of hoisting appliances in maritime conditions,” Machine Vibration3, 76-84 .
114.
Osiński, M. and Wojciech, S., 1998, “Application of nonlinear optimisation methods to input shaping of the hoist drive of an offshore crane,” Nonlinear Dynamics17, 369-386 .
115.
Ott, E., Kostelich, E., Yuan, G., Hunt, B., Grebogi, C., and Yorke, J. A., 1996, “Control of shipboard cranes,” in Proceedings of Noise-Con 96: The National Conference on Noise Control Engineering, Seattle, WA, pp. 407-410 .
116.
Parker, G. G., Groom, K., Hurtado, J. E., Feddema, J., Robinett, R. D., and Leban, F., 1999a, “Experimental verification of a command shaping boom crane control system,” in Proceedings of the American Control Conference, San Diego, CA, Vol. 1, pp. 86-90 .
117.
Parker, G. G., Groom, K., Hurtado, J., Robinett, R. D., and Leban, F., 1999b, “Command shaping boom crane control system with nonlinear inputs,” in Proceedings of the IEEE International Conference on Control Applications Kohala Coast, HI, Vol. 2, pp. 1774-1778 .
118.
Parker, G. G., Petterson, B., Dohrmann, C. R., and Robinett, R. D., 1995a, “Vibration suppression of fixed-time jib crane maneuvers,” in Proceedings of the SPIE Symposium on Smart Structures and Materials San Diego, CA, Vol. 2447, pp. 131-140 .
119.
Parker, G. G., Petterson, B., Dohrmann, C., and Robinett, R. D., 1995b, “Command shaping for residual vibration free crane maneuvers,” in Proceedings of the American Control Conference, Seattle, WA, pp. 934-938 .
120.
Parker, G. G., Robinett, R. D., Driessen, B. J., and Dohrmann, C. R., 1996, “Operator in-the-loop control of rotary cranes,” in Proceedings of the SPIE Symposium on Smart Structures and Materials, San Diego, CA, Vol. 2721, pp. 364-372 .
121.
Patel, M. H., Brown, D. T., and Witz, J. A., 1987, “Operability analysis for a monohull crane vessel,” Transactions of the Royal Institution of Naval Architects129, 103-113 .
122.
Posiadala, B., 1996, “Effect of vibration in hoist system on dynamics of truck crane,” Zeitschrist fur Angewandte Mathematik und Mechanik76-S5, 403-404 .
123.
Posiadala, B., 1997, “Influence of crane support system on motion of the lifted load,” Mechanism and Machine Theory32(1), 9-20 .
124.
Posiadala, B., Skalmierski, B., and Tomski, L., 1990, “Motion of the lifted load brought by a kinematic forcing of the crane telescopic boom,” Mechanism and Machine Theory25(5), 547-556 .
125.
Posiadala, B., Skalmierski, B., and Tomski, L., 1991, “Vibration of load lifted by a truck crane with consideration of physical properties of rope,” Machine Dynamics Problems2, 85-104 .
126.
Rahn, C. D., Zhang, F., Joshi, S., and Dawson, D. M., 1999, “Asymptotically stabilizing angle feedback for a flexible cable gantry crane,” Journal of Dynamic Systems, Measurement, and Control121, 563-566 .
127.
Rawston, P. J., and Blight, G. J., 1978, “Prediction of weather downtime for derrick barges,” in Proceedings of the 10th Annual Offshore Technology Conference, Houston, TX, OTC 3150.
128.
Ridout, A. J., 1987, “New feedback control system for overhead cranes,” in Proceedings of the Electric Energy Conference, Adelaide, Australia, Vol. 1, pp. 135-140 .
129.
Ridout, A. J., 1989, “Anti-swing control of the overhead crane using linear feedback,” Journal of Electrical and Electronics Engineering, Australia9(1/2), 17-26 .
130.
Sakawa, Y. and Nakazumi, A., 1985, “Modeling and control of a rotary crane,” Journal of Dynamic Systems, Measurement, and Control107, 200-206 .
131.
Sakawa, Y. and Shindo, Y., 1982, “Optimal control of container cranes,” Automatica18(3), 257-266 .
132.
Sakawa, Y., Shindo, Y., and Hashimoto, Y., 1981, “Optimal control of a rotary crane,” Journal of Optimization Theory and Applications35(4), 535-557 .
133.
Salminen, R., Marttinen, A., and Virkkunen, J., 1990, “Adaptive pole placement control of a pilot crane,” in Proceedings of IFAC 11th Triennial World Congress, Tallinn, Estonia, Vol. 2, pp. 313-318 .
134.
Sato, K. and Sakawa, Y., 1988, “Modelling and control of a flexible rotary crane,” International Journal of Control48(5), 2085-2105 .
135.
Schellin, T. E., Jiang, T., and Sharma, S. D., 1991, “Crane ship response to wave groups,” Journal of Offshore Mechanics and Arctic Engineering113, 211-218 .
136.
Schellin, T. E., Sharma, S. D., and Jiang, T., 1989, “Crane ship response to regular waves: Linearized frequency domain analysis and nonlinear time domain simulation,” in Proceedings of the 8th International Conference on Offshore Mechanics and Arctic Engineering The Hague, The Netherlands, Vol. 2, pp. 627-635 .
137.
Singhose, W. E., Porter, L. J., and Seering, W. P., 1997, “Input shaped control of a planar crane with hoisting,” in Proceedings of the American Control Conference, Albuquerque, NM, pp. 97-100 .
138.
Souissi, R. and Koivo, A. J., 1992, “Modeling and control of a rotary crane for swing-free transport of payloads,” in Proceedings of the 1st IEEE conference on Control Applications Dayton, OH, Vol. 2, pp. 782-787 .
139.
Starr, G. P., 1985, “Swing-free transport of suspended objects with a path-controlled robot manipulator,” Journal of Dynamic Systems, Measurement, and Control107, 97-100 .
140.
Strip, D. R., 1989, “Swing-free transport of suspended objects: a general treatment,” IEEE Transactions on Robotics and Automation5(2), 234-236 .
141.
Suzuki, Y., Yamada, S.-I., and Fujikawa, H., 1993, “Anti-swing control of the container crane by fuzzy control,” in Proceedings of the International Conference on Industrial Electronics, Control, and Instrumentation: IECON 93, Lahaina, HI, Vol. 1, pp. 230-235 .
142.
Takeuchi, S., Fujikawa, H., and Yamada, S., 1988, “The application of fuzzy theory for a rotary crane control,” in Proceedings of the International Conference on Industrial Electronics: IECON 88, Singapore, Vol. 2, pp. 415-420 .
143.
Todd, M. D., Vohra, S. T., and Leban, F., 1997, “Dynamical measurements of ship crane load pendulation,” in Oceans 97 MTS/IEEE: Conference Proceedings, Halifax, Canada, Vol. 2, pp. 1230-1236 .
144.
Towarek, Z., 1998, “The dynamic stability of a crane standing on soil during the rotation of the boom,” International Journal of Mechanical Sciences40(6), 557-574 .
145.
Vähä, P. and Marttinen, A., 1989, “Conventional and optimal control in swing-free transfer of suspended load,” in Proceedings of the IEEE International Conference on Control Applications: ICCON 89, Jerusalem, Israel, WA-3-5.
146.
van de Ven, H. H., 1983, Time-optimal control of crane operations, Eindhoven University of Technology, Research Report 83-E-135.
147.
van den Boom, H. J. J., Coppens, A., Dallinga, R. P., and Pijfers, J. G. L., 1987, “Motions and forces during heavy lift operations offshore,” in Developments in Marine Technology, Proceedings of a Workshop on Floating Structures and Offshore Operations Wageningen, The Netherlands, Vol. 4, pp. 51-61 .
148.
van den Boom, H. J. J., Dekker, J. N., and Dallinga, R. P., 1988, “Computer analysis of heavy lift operations,” in Proceedings of the 20th Annual Offshore Technology Conference, Houston, TX, OTC 5819.
149.
Virkkunen, J. and Marttinen, A., 1988, “Computer control of a loading bridge,” in Proceedings of the IEE International Conference: Control 88, Oxford, UK, pp. 484-488 .
150.
Virkkunen, J., Marttinen, A., Rintanen, K., Salminen, R., and Seitsonen, J., 1990, “Computer control of over-head and gantry cranes,” in Proceedings of IFAC 11th Triennial World Congress, Tallinn, Estonia, Vol. 4, pp. 401-405 .
151.
Wen, B., Homaifar, A., Bikdash, M., and Kimiaghalam, B., 1999, “Modeling and optimal control design of shipboard crane,” in Proceedings of the American Control Conference San Diego, CA, Vol. 1, pp. 593-597 .
152.
Willemstein, A. P., van den Boom, H. J. J., and van Dijk, A. W., 1986, “Simulation of offshore heavy lift operations,” in CADMO 86: Proceedings of the International Conference on Computer Aided Design Manufacture, and Operation in the Marine and Offshore Industries Washington, DC.
153.
Witz, J. A., 1995, “Parametric excitation of crane loads in moderate sea states,” Ocean Engineering22(4), 411-420 .
154.
Yamada, S., Fujikawa, H., and Matsumoto, K., 1983, “Suboptimal control of the roof crane by using the microcomputer,” in Proceedings of the Conference on Industrial Electronics: IECON 83, San Francisco, CA, pp. 323-328 .
155.
Yamada, S., Fujikawa, H., Takeuchi, O., and Wakasugi, Y, 1989, “Fuzzy control of the roof crane,” in IECON 89 Proceedings of the Conference of Industrial Electronics Society Philadelphia, PA, Vol. 4, pp. 709-714 .
156.
Yasunobu, S. and Hasegawa, T., 1986, “Evaluation of an automatic container crane operation system based on predictive fuzzy control,” Control-Theory and Advanced Technology2(3), 419-432 .
157.
Yasunobu, S. and Hasegawa, T., 1987, “Predictive fuzzy control and its application for automatic container crane operation system,” in Proceedings of the 2nd International Fuzzy Systems Association (IFSA) Congress, Tokyo, Japan, pp. 349-352 .
158.
Yasunobu, S., Sekino, S., and Hasegawa, T., 1987, “Automatic train operation and automatic crane operation systems based on predictive fuzzy control,” in Proceedings of the 2nd International Fuzzy Systems Association (IFSA) Congress, Tokyo, Japan.
159.
Yoon, J. S., Park, B. S., Lee, J. S., and Park, H. S., 1995, “Various control schemes for implementation of the antiswing crane,” in Proceedings of the ANS 6th Topical Meeting on Robotics and Remote Systems, Monterey, CA, pp. 472-479 .
160.
Yoshida K. and Kawabe, H., 1992, “A Design of saturating control with a guaranteed cost and its application to the crane control system,” IEEE Transactions on Automatic Control37(1), 121-127 .
161.
Yu, J., Lewis, F. L., and Huang, T., 1995, “Nonlinear feedback control of a gantry crane,” in Proceedings of the American Control Conference, Seattle, WA, pp. 4310-4315 .
162.
Yuan, G. H., Hunt, B. R., Grebogi, C., Ott, E., Yorke, J. A., and Kostelich, E. J., 1997, “Design and control of shipboard cranes,” in DETC 97 Proceedings of the ASME Design Engineering Technical Conferences, Sacramento, CA, DETC97/VIB-4095.
163.
Zinober, A. S. I., 1979, “The self-adaptive control of overhead crane operations,” in Proceedings of the 5th IFAC Symposium on Identification and System Parameter Estimation, Darmstadt, East Germany, pp. 1161-1167 .
164.
Zinober, A. S. I. and Fuller, A. T., 1973, “The sensitivity of nominally time-optimal control of systems to parameter variation,” International Journal of Control17, 673-703 .
165.
Zinober, A. S. I. and Yang, X. H., 1988, “Continuous self-adaptive control of a time-varying nonlinear crane system,” in Proceedings of the IFAC Symposium on Identification and System Parameter Estimation, Beijing, China.
166.
Zmić, N., Ostrić, D., and Brkić, A., 1997, “Mathematical modeling of gantry cranes,” Bulletins for Applied and Computing MathematicsLXXXI-A(1312), 185-194 .
167.
Zmić, N. D., Petcovic, Z. D., Ostrić, D. Z., and Brkić, A. D., 1998, “On a method for defining horizontal forces of gantry cranes,” in TEHNO 98: Proceedings of the Conference of Manufactoring Engineering, Timisoara, Romania, pp. 573-580 .
