This work is a study of bladed-disk vibration control using magnetic bearings. A simulation model consisting of a shaft/bladed-disk assembly supported by two radial magnetic bearings and a thrust bearing is considered. A simplified model is developed and used to identify controllable vibration modes. This information is then used to discuss the potential effectiveness and limitations of bladed-disk vibration control using shaft-based actuators (the magnetic bearings) on symmetric rotors. A control strategy based on using deliberate bladed mistuning is presented for such systems in light of this discussion.
Chang, J.C.I., 1996, "Integrated research approach to attack engine HCF problem," in Proceedings of the American Society of Mechanical Engineers, Aerospace Division (Publication) AD, vol. 52, pp. 313-320.
2.
Coleman, R.P. and Feingold, A.M., 1958, "Theory of self excited mechanical oscillations of helicopter rotors with hinged blades," NACA Report 1351.
3.
Flowers, G.T. and Ryan, S.G., 1993, "Development of a set of equations for incorporating disk flexibility effects in rotordynamical analyses,"ASME Journal of Engineering for Gas Turbines and Power115(2), 227-233.
4.
Flowers, G.T., Szász, G., Trent, V.S., and Greene, M.E., 1997, "Study of integrally augmented state feedback control for an active magnetic bearing supported rotor system," in American Society of Mechanical Engineers, ASME, 97-GT-231, New York.
5.
Gordon, R.W. and Hollkamp, J.J., 1997, "Internal damping treatment for gas turbine blades," in Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, vol. 1, pp. 442-451, AIAA, New York.
6.
Griffin, J.H., Wu, W.-T., and El-Aini, Y., 1996, "Friction damping of hollow airfoils: Part I - theoretical development," in Proceedings of the 1996 International Gas Turbine and Aeroengine Congress & Exhibition , Birmingham, UK, June 10.
7.
Humphris, R.R., Kelm, R.D., Lewis, D.W., and Allaire, P.E., 1986, "Effect of control algorithms on magnetic journal properties,"ASME Journal of Engineering for Gas Turbines and Power108(October), 624-632.
8.
Kailath, T., 1980, Linear Systems, Prentice Hall , Englewood Cliffs, NJ.
9.
Kielb, R.E. and Kaza, K.R.V., 1984, "Effects of structural coupling on mistuned cascade flutter and response,"Journal of Engineering for Gas Turbines and Power106(January), 17-24.
10.
Lamb, H. and Southwell, R.V., 1921, "The vibrations of a spinning disk,"Proceedings of the Royal Society of London, Series A, vol. 99, pp. 272-280.
11.
Meher-Homji, C.B., 1995, "Blading vibration and failures in gas turbines part A: Blading dynamics & the operating environment," ASME Paper Number 95-GT-418.
12.
Pierre, C. and Murthy, D.V., 1992, "Aeroelastic modal characteristics of mistuned blade assemblies: Mode localization and loss of eigenstructure,"AIAA Journal30(10), 2483-2496.
13.
Williams, R.D., Keith, F.J., and Allaire, P.E., 1991, "A comparison of analog and digital controls for rotor dynamic vibration reduction through active magnetic bearings,"Journal of Engineering for Gas Turbines and Power113(October), 535-543.
