The Use of Statistical Quality Control Charts to Evaluate Changes in Individual Performance

Abstract

An employee's readiness to perform (RTP) has become an important issue facing today's industries. Some industries have turned to cognitive performance testing to provide answers regarding their employee's abilities to work safely and effectively. Such tests are designed to assess the employee's current state of preparedness for work without identifying specific causes for any noted performance impairment. This paper evaluates performance-based RTP tests with regard to the metrics by which performance change is judged. In addition to evaluating a current commonly used metric, several statistical quality control charts were examined as alternate methods for identifying impaired performance. Traditional Shewhart charts were used as well as exponentially weighted moving average charts and cumulative sum charts. A comparative analysis of the various methods revealed that control chart techniques provided superior effectiveness over the current method. Specifically, exponentially weighted moving average charts were effective in evaluating continuous performance measures and Shewhart p charts were effective in evaluating discrete measure data.

Get full access to this article

View all access options for this article.

References

Breyfogle

F.W.

III (1992). Statistical methods for testing, development, and manufacturing, New York: John Wiley and Sons, Inc.

Gilliland

Schlegel

R.E.

(1993). Readiness-to-Perform Testing: A Critical Analysis of the Concept and Current Practices. Final Report DOT/FAA/AM-93-13, Washington, DC: Office of Aviation Medicine, Federal Aviation Administration.

Gilliland

Schlegel

R.E.

(1994). Development of a laboratory model of readiness-to-perform testing. Paper presented at the Aerospace Medical Association 65th Annual Scientific Meeting, San Antonio, TX.

Kennedy

R.S.

Turnage

J.J.

Dunlap

W.P.

(1992). The use of dose equivalency as a risk assessment index in behavioral neurotoxicology. Neurotoxicology and Teratology, 14, 167–175.

Hays

W.L.

(1988). Statistics (4th edition). Ft. Worth, TX: Holt, Rinehart, and Winston, Inc.

Hines

W.W.

Montgomery

D.C.

(1980). Probability and statistics in engineering and management science (2nd edition). New York: John Wiley and Sons.

Montgomery

D.C.

(1991). Introduction to statistical quality control, 2nd Edition, New York: John Wiley and Sons, Inc.

Shehab

R.L.

Schlegel

R.E.

Gilliland

(1995). The use of statistical quality control techniques in readiness to perform testing. In Proceedings of the Konz-Purswell Occupational Ergonomics Symposium (pp. 109–114), Lubbock, TX: Texas Tech University.

Wheeler

D.J.

Chambers

D.S.

(1992). Understanding statistical process control, Knoxville, TN: SPC Press.