Low back pain (LBP) is a common health problem and a major cause of lost productivity in workplaces. Manual materials handling (MMH) jobs have traditionally been regarded as risk factor for LBP. Compared to two-handed lifting, one-handed lifting has received little attention in both epidemiological and biomechanical research. In addition, one frequent complaint of the revised NIOSH lifting equation (RNLE) has been the lack of capability to directly evaluate one-handed lifting. Modifications have been proposed by the European Union, however their efficacy and influence have not yet been evaluated. This cross-sectional study provided objective survey of the MMH jobs, especially the one-handed lifting performed in manufacturing industry and investigated the outcomes of three proposed methods to address one-handed lifting using RNLE approach. Preliminary results suggest that workers with some one-handed lifting are associated with higher physical exposure. However, the increase was more significant among those who perform primarily one-handed lifting.
Get full access to this article
View all access options for this article.
References
1.
AllreadW.MarrasW.S.ParnianpourM. (1996) Trunk kinematics of one- handed lifting, and the effects of asymmetry and load weight. Ergonomics, 39(2), 322-334.
2.
AnderssonG. B. (1981). Epidemiologic aspects on low-back pain in industry. Spine (Phila Pa 1976), 6(1), 53-60.
3.
ArjmandN.PlamondonA.Shirazi-AdlA.ParnianpourM.LarivièreC. (2012, Jul). Predictive equations for lumbar spine loads in load- dependent asymmetric one- and two-handed lifting activities. Clin Biomech (Bristol, Avon), 27(6), 537-44.
4.
BrinckmannP.BiggemannM.HilwegD. (1989). Prediction of the compressive strength of human lumbar vertebrae. Clinical Biomechanics, 4(supplement 2), 1-27.
5.
Bureau of Labor Statistics. (2015). Nonfatal occupational injuries and illnesses requiring days away from work, 2015 (No. USDL-16-2130). Washington, DC: U.S. Department of Labor.
6.
CHSWC. (2011). Selected indicators in health and safety and workers’ compensation: 2011 report card for California (Tech. Rep.). The California Commission on Health and Saftey and Workers’ Compensation, Department of Industrial Relations, Labor and Workplace Development Agency, State of California.
7.
CirielloV. M.SnookS. H. (1999). Survey of manual handling tasks. International Journal of Industrial Ergonomics, 23, 149-56.
8.
CirielloV. M.SnookS. H.HashemiL.CotnamJ. (1999). Distributions of manual materials handling task parameters. International Journal of Industrial Ergonomics, 24, 378-88.
9.
DempseyP. G. (2003). A survey of lifting and lowering tasks. International Journal of Industrial Ergonomics, 31, 11-6.
10.
FergusonS. A.Gaudes-MacLarenL. L.MarrasW. S.WatersT. R.DavisK. G. (2002, May). Spinal loading when lifting from industrial storage bins. Ergonomics, 45(6), 399-414.
11.
GallagherS.MarrasW. S.LitskyA. S.BurrD. (2005). Torso flexion loads and the fatigue failure of human lumbosacral motion segments. Spine (Phila Pa 1976), 30(20), 2265-73.
12.
GargA.BodaS.HegmannK. T.MooreJ. S.KapelluschJ. M.BhoyarP.. . . MalloyE. J. (2014, Feb). The NIOSH lifting equation and low-back pain, part 1: Association with low-back pain in the BackWorks prospective cohort study. Human Factors, 56(1), 6-28.
13.
GargA.HegmannK. T.MooreJ. S.KapelluschJ.ThieseM. S.BodaS. . . . BackWorks Study Team (2013, Mar). Study protocol title: a prospective cohort study of low back pain. BMC Musculoskelet Disord, 14, 84.
14.
GungorC.TangR.SesekR.F.ForemanK.B.GallagherS.DavisG.A. (2015a). Morphological investigation of low back erector spinae muscle: historical data populations. Int J Ind Ergon, 49,108-15
15.
GungorC.TangR.SesekR.F.ForemanK.B.GallagherS.DavisG.A. (2015b). Prediction models for the erector spinae muscle cross-sectional area. J Biomech Eng, 137, 1-8
16.
GungorC.TangR.SesekR.F.ForemanK.B.GallagherS.DavisG.A. (2019). Regression models for the erector spinae muscle mass (ESMM) cross-sectional area: asymptomatic populations. J Biomech Eng, 141, 1-8
17.
HoogendoornW. E.BongersP. M.de VetH. C.DouwesM.KoesB. W.MiedemaM. C.. . . BouterL. M. (2000, Dec). Flexion and rotation of the trunk and lifting at work are risk factors for low back pain: results of a prospective cohort study. Spine (Phila Pa 1976), 25(23), 3087-92.
18.
KatzJ. N. (2006). Lumbar disc disorders and low-back pain: socioeconomic factors and consequences. J Bone Joint Surg Am, 88Suppl 2, 21-4.
19.
KimH. S.ChoiJ. W.ChangS. H.LeeK. S.OhJ. Y. (2005). Treatment duration and cost of work-related low back pain in Korea. J Korean Med Sci, 20(1), 127-31.
20.
KingmaI.FaberG. S.van DieënJ. H. (2016, Apr). Supporting the upper body with the hand on the thigh reduces back loading during lifting. J Biomech, 49(6), 881-889.
21.
MarrasW. S.DavisK. G. (1998, Jun). Spine loading during asymmetric lifting using one versus two hands. Ergonomics, 41(6), 817-34.
22.
MarrasW. S.FergusonS. A.LavenderS. A.SplittstoesserR. E.YangG. (2014, Feb). Cumulative spine loading and clinically meaningful declines in low-back function. Human Factors, 56(1), 29-43.
23.
MitalA., (1985). Preliminary guidelines for designing one-handed material handling tasks. Journal of Occupational Accidents, 7, 33-40.
24.
NIOSH. (1981). Work practices guide for manual lifting (Tech. Rep.). National Institute for Occupational Safety and Health.
25.
NIOSH. (1997). Musculoskeletal disorders and workplace factors (Tech. Rep.). National Institute for Occupational Safety and Health (NIOSH), Centers for Disease Control and Prevention.
26.
RajaeeM. A.ArjmandN.Shirazi-AdlA.PlamondonA.SchmidtH. (2015, May). Comparative evaluation of six quantitative lifting tools to estimate spine loads during static activities. Appl Ergon, 48, 22-32.
27.
RingelbergJ. A.KoukoulakiT. (2003). Risk estimation for musculoskeletal disorders in machinery design. Brussels, Belgium: European Trade Union Technical Bureau for Health and Safety.
28.
TangR.GungorC.SesekR.F.ForemanK.B.GallagherS.DavisG.A. (2016). Morphometry of the lower lumbar intervertebral discs and endplates: comparative analyses of new MRI data with previous findings. Eur Spine J, 25(12), 4116-31
29.
TangR.LuM.L.MerryweatherA.ThieseM.S.HegmannK.T.FergusonS.A.… KapelluschJ.M. (2018). Distributions of job physical exposure data in a pooled study of low back pain prospective cohorts. Proceedings of the Human Factors and Ergonomics Society Annual Meeting62(1), 920-924.
30.
TangR.GungorC.SesekR.F.GallagherS.DavisG.A.ForemanK.B. (2019). Prediction models for the cross-sectional areas of lower lumbar intervertebral discs and vertebral endplates. Int J Ind Ergon, 49, 12-34
31.
ThieseM. S.HegmannK. T.WoodE. M.GargA.MooreJ. S.KapelluschJ. M.. . . BackWords Study Team (2014, Feb). Low-back pain ratings for lifetime, 1-month period, and point prevalences in a large occupational population. Human Factors, 56(1), 86-97.
32.
WatersT. R.Putz-AndersonV.GargA.FineL. J. (1993). Revised NIOSH equation for the design and evaluation of manual lifting tasks. Ergonomics, 36(7), 749-76.
33.
WebsterB. S.SnookS. H. (1994). The cost of 1989 workers’ compensation low back pain claims. Spine (Phila Pa 1976), 19(10), 1111- 5; discussion 1116
