This paper describes an approach to automated fixture design that will enable fixture design to take place concurrently with process planning. Data needs, reasoning models, and functional requirements of automated fixture design systems are first analyzed. A system architecture of three fixture design stages—conceptual, layout, and detail design—is then proposed and its implications on process planning tasks discussed. The focus of this paper is in fixturing of complex parts. Design problems that do not arise in fixturing of simple parts but must be addressed in that of complex parts are described and their solution methodologies outlined. Finally, preliminary results of a software implementation are presented.
H. Asada and M. Kitagawa, "Form Closure Grasping by a Reconfigurable Universal Gnpper", Proceedings of Manufacturing International, 1988 , pp. 85-90.
2.
J.J. Bausch and K. Youcef-Toumi, "Kinematic Methods for Automatic Fixture Reconfiguration Planning", Proceedings of Robotics and Automation, IEEE, 1990 , pp. 1396-1401.
3.
B.M. Bazrov and A.I. Sorokin, "The Effect of Clamping Sequence on Workpiece Mounting Accuracy", Soviet Engineering Research , Vol. 2, No. 10, 1982, pp. 92-95.
4.
B. Bidanda and P.H. Cohen, "Development of A Computer Aided Fixture Selection System for Concentnc, Rotational Parts", Proceedings of the Symposium on Advances in Integrated Product Design and Manufacturing, ASME, 1990, pp. 219-226.
5.
J.R. Boerma and H.J.J. Kals, "Fixture Design with FIXES: the Automatic Selection of Positioning, Clamping and Support Features for Prismatic Parts ", CIRP , 1989, pp. 399-402.
6.
Y.C. Chou, "A Methodology for Automatic Layout of Fixture Elements Based on Machining Forces Considerations", Proceedings of the Symposium on Advances in Integrated Product Design and Manufacturing, ASME, 1990, pp. 181-189.
7.
Y.C. Chou , "A Theoretical Framework for Automatic Layout of Machining Fixtures", Journal of Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 6, No. 2, 1992, pp. 111-121.
8.
A.R. Darvishi and K.F. Gill, "Knowledge Representation Database for the Development of a Fixture Design Expert System", Proceedings of the Institution of Mechanical Engineers, Vol. 202, No. B1, 1988, pp. 37-49.
9.
E.C. De Meter , "Restraint Analysis of Machining Fixtures", Transactions of NAMRI, Vol.20, 1992, pp. 339-345.
10.
P.J. Englert and P.K. Wnght, "Principles for Part Setup and Workholding in Automated Manufacturing", Journal of Manufacturing Systems , Vol. 1, No. 2, 1988, pp. 147-161.
11.
P.M. Ferreira and C.R. Liu, "Generation of Workpiece Orientations for Machining Using a Rule-Based System", Robotics and Computer-Integrated Manufacturing, Vol. 4, No. 3/4, 1988, pp. 545-555.
12.
S.J. Gordon and W.P. Seering, "Reconfigurable Assembly Fixtures", Proceedings of Manufacturing International, 1988, pp. 91-96.
13.
P.M. Grippo , M.V. Gandhi, and B.S. Thompson, "The Computer-Aided Design of Modular Fixturing Systems", International Journal of Advanced Manufacturing Technology, Vol. 2, No. 2, 1987, pp. 75-88.
14.
C.C. Hayes, Machining Planning: A Model of an Expert Level Planning Process, Ph.D. Dissertation, Carnegie-Mellon, 1990.
15.
F. Brack Hazen and P.K. Wright, "Workholding Automation: Innovations in Analysis, Design, and Planning", Manufacturing Review, Vol. 3, No. 4, 1990, pp. 224-237.
16.
L.S.B. King , "The Physics of Automatic Fixturing for Assembly ", Proceedings of the 1992 NSF Design and Manufacturing Systems Conference, 1992, pp. 717-720.
17.
J.D. Lee and L.S. Haynes, "Finite Element Analysis of Flexible Fixturing System", Journal of Engineering for Industry , Vol. 109, 1987, pp. 579-584.
18.
F.W. Liou and D.J. Suen, "The Development of a Feature-Based Fixture Process Planning System for Flexible Assembly", Journal of Manufacturing Systems, Vol. 11, No. 3, 1992, pp. 102-113.
19.
M. Mani and W.R.D. Wilson, "Automated Design of Workholding Fixtures Using Kinematic Constraint Synthesis", Proceedings of the North American Manufacturing Research Conference, 1988, pp. 437-444.
20.
A. Markus, "Strategies for the Automated Generation of Modular Fixtures", Proceedings of Manufacturing International, 1988 , pp. 97-103.
21.
R.J. Menassa and W.R. DeVries, "A Design Synthesis and Optimization Method for Fixtures with Compliant Element", Proceedings, The Symposium on Advances in Integrated Product Design and Manufacturing, ASME, 1990, pp. 203-218.
22.
B.O. Nnaji and P. Lyu, "Rules for an Expert Fixturing System for Face Milling Planar Surfaces on a CAD System using Flexible Fixtures ", International Journal of Intelligent Manufacturing, Vol. 1, 1990, pp. 31-48.
23.
D.T. Pham , M.J. Nategh, and A. de Sam Lazoro, "A Knowledge-Based Jig and Fixture Designers' Assistant", International Journal of Advanced Manufacturing Technology, Vol. 4, No. 4, 1989, pp. 26-45.
24.
A.S. Kumar , A.Y.C. Nee, and S. Prombanpong, "Expert Fixture Design System for an Automated Manufacturing Environment", Computer-Aided Design , Vol. 24, No. 6, 1992, pp. 316-326.
25.
R.H. Sturges , "Towards a Rational Workholding Methodology ", Proceedings, Robotics and Automation, IEEE , 1990, pp. 1738-1743.
26.
J.C.A. Trappey and C.R. Liu, "Automatic Generation of Configuration for Fixturing An Arbitrary Workpiece Using Projective Spatial Occupancy Enumeration Approach", Proceedings of the Symposium on Advances in Integrated Product Design and Manufacturing, ASME, 1990, 191-202.
27.
K. Youcef-Toumi , W.S. Liu, and H. Asada, "Computer-aided Analysis of Reconfigurable Fixtures and Sheet Metal Parts for Robotic Drilling ", Journal of Robotics and Computer-Integrated Manufacturing , Vol. 4, No. 3/4, 1988, pp. 387-393.
