Knowledge-based Geometry Generation for Spur and Helical Gears

Abstract

Numerical analysis and true 3-D solid models of gear pairs are highly desirable to simulate real working conditions and reduce long and expensive test phases. This article presents methods, within a knowledge-based Automated Concurrent Engineering Software (ACES) for gear design and manufacturing system, for defining the gear tooth profile analytically from basic geometric parameters (diametral pitch, pressure and helix angles, number of teeth and tooth thickness) and determining the coordinates of all points on the working and the fillet portions of the tooth for standard and nonstandard gears, in order to generate FEM models for analysis, through automatic mesh generation and boundary condition assignment and produce a suitable gear construction (3-D model). The involute and trochoid curves can then be plotted on a Cartesian coordinate system emanating at the center of the gear. An accurate description of the tooth geometry and the associated mating-gears model for FEM analysis provide an early estimation of the full stress fields during the design phase, where there is still time to make significant changes. This 3-D solid model provides maximal value to a designer for machining the gear on a standard CNC milling machine without form cutters; far defining tool paths for Electric Discharge Machining (EDM); for rapid prototyping systems and for viewing VRML models. The system has a direct interface with a FEM processor (ANSYS) and a CAD tool (Pro/E). A case study is presented to demonstrate the system functionality with spur and helical gears.

Keywords

concurrent engineering knowledge-based system feature-level knowledge 2-D FEM 3-D gear model

Get full access to this article

View all access options for this article.

References

Aziz

and Chassapis

(September 2001). An Intelligent System for Spur Gear Design and Analysis. In: Proceedings of ASME Design Engineering Technical Conferences, Pittsburgh, Pennsylvania.

Prasad

(1997). Concurrent Engineering Fundamentals: Integrated Product Development, Vol. II, Prentice Hall, Upper Saddle River, NJ.

Prasad

(1996). Concurrent Engineering Fundamentals: Integrated Product and Process Organization, Vol. I, Prentice Hall, Upper Saddle River, NJ.

Andrews

G.C.

and Argent

J.D.

(1992). Computer-Aided Optimal Gear Design, International Power Transmission and Gearing Conference, Vol. 1, ASME.

EL-Bahloul

A.M.M.

(1992). CAD for Gears: Spur, Helical and Double Helical Gears, Mansoura University Journal, 17(3).

Jauregui

J.C.

and Sanalvador

R.L.

(1992). Software for Optimum Gear Design, Mechanical Design and Synthesis, DE-Vol. 46, ASME.

Metwalli

S.M.

and El-danaf

E.A.

(August 1996). CAD and Optimization of Spur and Helical Gear Set. In: Proceedings of ASME Design Engineering Technical Conferences and Computer in Engineering Conference, Irvine, California.

Yiu-Wing

and Siang-Kok

(1998). An Expert System for Gearing Design Application, International Journal of Computer Applications in Technology, 11: 11–26.

Abersek

(1996). Expert System for Designing and Manufacturing of a Gear Box, Expert Systems with Applications, 11(3): 397–405.

10.

Pinfold

and Chapman

(2001). The Application of KBE Techniques to the FE Model Creation of an Automotive Body Structures, Computer in Industry Journal, 44: 1–10.

11.

Dudley

D.W.

(1984). Dudley's Handbook of Gear Design, MacMillan, New York.

12.

Buckingham

(1988). Analytical Mechanics of Gears, Buckingham Association and Dover Publications, New York.

13.

Merritt

H.E.

(1992). Gear Engineering, Wheeler Publishing, India.

14.

Xiaogen

and Donald

R.H.

(1999). Characteristic of Trochoids and their Application to Determining Gear Teeth Fillet Shapes, Mechanism and Machine Theory, 35: 291–304.

15.

Litvin

L.F.

(1994). Gear Geometry and Applied Theory, Prentice-Hall, Englewood Cliffs, New Jersey.

16.

Chang

H.L.

and Tsai

Y.C.

(1992). A Mathematical Model of Parametric Tooth Profiles for Spur Gears, Journal of Mechanical Design, 114: 8–16.

17.

Andraws

J.D.

(1991). A Finite Element Analysis of Bending Stresses Induced in External and Internal Involute Spur Gears, Journal of Strain Analysis, 26(3): 153–163.

18.

Allison

I.M.

and Hearn

E.J.

(1980). A New Look at the Bending Strength of Gear Teeth, Expl. Mech.

19.

Filiz

I.H.

and Eyercioglu

(1995). Evaluation of Gear Tooth Stresses by Finite Element Method, Journal of Engineering for Industry, 117.

20.

Kang

and Haghighi

(1995). Intelligent Finite Element Mesh Generation, Engineering with Computer, 70–82.

21.

Esche

S.K.

, Fidan

, Chassapis

and Manoochehri

(1999). Knowledge-Based Part and Process Design for Metal Forging, SAE Transactions - Journal of Materials and Manufacturing, 108(5): 92–99.

22.

Arikan

M.A.

(September 2000). Performance Rating and Optimization of Spur Gear Drives with Small Number of Teeth. In: Proceedings of the Design Engineering Technical Conferences, ASME, Baltimore, Maryland.

23.

Dimarogonas

A.D.

(1989). Computer Aided Machine Design, Prentice-Hall, New York.