The effects of weak clay particles on the creep response of argillaceous salt have been analyzed by considering the particles as damage initiation sites where local tensile stresses and microcracks are induced under triaxial compression. The thermodynamic driving force for the damage process is formulated in terms of an appropriate power-conjucate equivalent stress measure, and the damage kinetics are described in terms of an evolution equation formulated on the basis of the conjugate equivalent stress and the scalar damage variable from Kachanov (1958). This treatment of clay particle effects is then incorporated into the Multimechanism Deformation Coupled Fracture (MDCF) constitutive model. A summary of the constitutive model is presented with an evaluation of the model calculations against experimental data of clean and argillaceous salt. The results suggest that the higher creep rate observed in argillaceous salt compared to clean salt is the consequence of increased damage growth in argillaceous salt due to the presence of weak clay particles.
Ashby, M. F. and B. F. Dyson. 1984. Advances in Fracture Research (Fracture 84). S. R. Valluri, D. M. R. Taplin, P. Rama Rao, J. F. Knott and R. Dubey, Eds., Oxford, UK: Pergamon Press. 1:3-30.
2.
Asbhy, M. F. and S. D. Hallam. 1986. Acta Metall., 34:497-510.
3.
Aubertin, M. , D. E. Gill and B. Landanyi. 1993. Seventh Symp. on Salt., Amsterdam, Holland: Elsevier Science Publ., 1:93-104.
4.
Aubertin, M. , J. Sgaoula and D. Gill. 1993. Seventh Symposium on Salt, Amsterdam, Holland: Elsevier Science Publications, 1:117-125.
5.
Aubertin, M. , D. E. Gill and B. Ladanyi. 1991. Mech. of Mat., 11:63-82.
6.
Bodner, S. R.1985. in Plasticity Today. A. Sawczuk and G. Bianchi, Eds., London, UK: Elsevier and Applied Science, pp. 471-482.
7.
Bodner, S. R. and K. S. Chan. 1986. Eng. Fract. Mech., 25:705-712.
8.
Brace, W. F. and E. G. Bombolakis. 1963. J. of Geophys. Research, 68:3709-3713.
9.
Brace, W. F. , B. W. Paulding, Jr. and C. Scholz. 1966. J. of Geophys. Research, 71:3939-3953.
10.
Chan, K. S. , S. R. Bodner, A. F. Fossum and D. E. Munson. 1995. Proc. 35th US. Symp. on Rock Mech., J. J. K. Daemen and R. A. Schultz, Eds., Rotterdam: Balkem, pp. 485-490.
11.
Chan, K. S. , S. R. Bodner, A. F. Fossum and D. E. Munson. 1992. Mech. Mat., 14:1-14.
12.
Chan, K. S. , N. S. Brodsky, A. F. Fossum, S. R. Bodner and D. E. Munson. 1994. Int. J. of Plasticity, 10:623-642.
13.
Cristescu, N. and U. Hunsche. 1992. Finite Inelastic Deformation-Theory and Applications, D. Besdo and E. Stein, Eds., Berlin, Germany: Springer-Verlag, pp. 511-523.
14.
Cristescu, N.1993. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 30:125-140.
15.
Cruden, D. M.1974. Int. J. Rock Mech. Min. Sci. and Geomech. Abstr., 11:67-73.
16.
Desai, C. S. and D. Zhang. 1987. Int. J. for Num. & Analy. Methods in Geomechanics, 11:603-620.
17.
Easterling, D. E. and G. A. Gessinger. 1972. Z. Metallkd., 63:237-240.
18.
Fossum, A. F. , G. D. Callahan, L. L. Van Sambeek and P. Senseny. 1988. Key Questions in Rock Mechanics, P. A. Cundall, R. L. Sterling and A. M. Starfield, Eds., Balkema, Rotterdam, pp. 35-41.
19.
Fossum, A. F. , N. S. Brodsky, K. S. Chan and D. E. Munson. 1993. Int. J. of Roch Mech. Mining Science & Geomech. Abs., 30:1341-1344.
20.
Garofalo, R.1963. Transactions of the Metallurgical Society, AIME, 227:351-356.
21.
Henry, J. F. and F. V. Ellis. 1990. Proc. of ASME PVP Conference, New York, NY: ASME, 193:47-55.
22.
Horii, H. and S. Nemat-Nasser. 1986. Phil. Trans. R. Soc. Lond. A., 319:337-374.
23.
Horii, H. and S. Nemat-Nassser. 1985. J. of Geophys. Research, 90:3105-3125.
24.
Jaeger, J. C. and N. G. W. Cook. 1976. Fundamentals of Rock Mechanics, 2nd Ed., London, UK: Champman & Hall, 10:244-254.
25.
Kachanov, L. M.1958. Izv: Akad. Nauk USSR, Otdgel. Tekh, Nauk., 8:26-31 (in Russian).
26.
Langer, M. 1984. Proc. First Conf Mechanical Behavior of Salt, Clausthal, Germany: Trans. Tech. Publications, pp. 201-231.
27.
Munson, D. E.1979. "Preliminary Deformation-Mechanism Map for Salt (With Application to WIPP)."SAND79-0076, Sandia National Laboratories, Albuquerque, NM.
28.
Munson, D. E. and P. R. Dawson. 1984. Proc. First Conf on the Mechanical Behavior of Salt, Clausthal, Germany: Trans. Tech. Publications, pp. 717-737.
29.
Munson, D. E. , A. F. Fossum and P. E. Senseny. 1989. "Advances in Resolution of Discrepancies Between Predicted and Measured In-Situ WIPP Room Closures,"SAND88-2948, Sandia National Laboratories, Albuquerque, NM.
30.
Nemat-Nasser, S. 1983. Proc. ICF Int. Symp. on Fract. Mech., Beijing, China: Beijing Science Press, pp. 185-197.
31.
Nemat-Nasser, S. and H. Horii. 1982. J. of Geophys. Research, 87:6805-6821.
32.
Paris, P. C. and G. C. Sih. 1965. Fracture Toughness Testing and its Applications, Philadelphia, PA: ASTM. ASTM STP 381:30-76.
33.
Prager, W.1945. J. App. Phys.16:837-840.
34.
Rösler, J. and E. Arzt. 1990. Acta Metall. Mater., 38:671-683.
35.
Sammis, C. G. and M. F. Ashby. 1986. Acta Metall., 34:511-526.
36.
Senseny, P. E.1983. "Review of Constitutive Laws Used to Describe the Creep of Salt,"ONWI-295, Office of Nuclear Waste Isolation, Batelle Memorial Institute, Columbus, OH.
37.
Senseny, P. E.1986. "Triaxial Compression Creep Tests on Salt from the Waste Isolation Pilot Plant,"SAND85-7261, Sandia National Laboratories, Albuquerque, NM.
38.
Wallner, M. 1984. Proc. First Conf. Mechanical Behavior of Salt, Clausthal, Germany: Trans Tech. Publications, pp. 738-763.
