The study of rock damage evolution is of great significance in the field of underground engineering. In this paper, the damage development of deep formation rock was quantitatively evaluated by acoustic emission (AE) test. The Young’s modulus of the test rock specimens under ideal intact state was obtained by assuming a linear relationship between the AE rate parameter and the damage variation based on the rate process theory. Through the multi-stage cyclic loading test, the damage parameters corresponding to the peak stress of the previous stage were calculated by using the tangent modulus at the initial moment. The results showed that there was abrupt transition stage of damage development with the linear increase of stress. The damage parameter curves of rock specimens during loading process were obtained by using the method of cumulative AE energy, and the development trend of the curves was analyzed simply by combining the concepts of crack initiation stress and crack damage stress. Comparing the two methods of obtaining damage parameters by using cyclic loading test and cumulative AE energy, the results of them were highly consistent except for some deviation in the initial and final stages.
ASTM (1994) Standard test method for laboratory determination of pulse velocities and ultrasonic elastic constants of rock. In: Annual book of ASTM standards, America, pp. 2845–2890.
2.
CarpinteriALacidognaGCorradoM, et al.. (2016)
Cracking and crackling in concrete-like materials: A dynamic energy balance. Engineering Fracture Mechanics155: 130–144.
3.
CarpinteriALacidognaGNiccoliniG, et al.. (2009)
Morphological fractal dimension versus power-law exponent in the scaling of damaged media. International Journal of Damage Mechanics18(3): 259–282.
4.
CarpinteriALacidognaGPugnoN (2006)
Richter's laws at the laboratory scale interpreted by acoustic emission. Magazine of Concrete Research58(9): 619–625.
5.
EberhardtESteadDStimpsonB, et al.. (1998)
Identifying crack initiation and propagation thresholds in brittle rock. Canadian Geotechnical Journal35(2): 222–233.
HuMMZhouHZhangYH, et al.. (2019)
Acoustic emission monitoring on damage evolution of surrounding rock during headrace tunnel excavation by TBM. European Journal of Environmental and Civil Engineering23(10): 1248–1264.
8.
Iida T, Watanabe H, Tomoda Y, et al. (2000) Damage estimation of concrete core by AE rate process analysis. Proceeding of Japan Concrete Institute 22: 271–276.
9.
IturriozILacidognaGCarpinteriA (2013)
Acoustic emission detection in concrete specimens: Experimental analysis and lattice model simulations. International Journal of Damage Mechanics23(3): 327–358.
10.
KachanovLM (1958)
Time rupture process under creep conditions. IVZ Akud Nauk S.S.R. Old Tech Nauk12(8): 26–31.
11.
KaiserEJ (1953) A Study of Acoustic Phenomena in Tensile Tests.
Munich, Germany:
Technische Hochschule München.
12.
KimJYiJKimJ, et al.. (2013)
Fatigue life prediction methodology using entropy index of stress interaction and crack severity index of effective stress. International Journal of Damage Mechanics22(3): 375–392.
13.
KimJ-SLeeK -SChoW-J, et al.. (2015)
A comparative evaluation of stress–strain and acoustic emission methods for quantitative damage assessments of brittle rock. Rock Mechanics and Rock Engineering48(2): 495–508.
KrajcinovicDSumaracD (1989)
A mesomechanical model for brittle deformation processes: Part II. Journal of Applied Mechanics56(1): 51–56.
16.
LauJSOChandlerNA (2004)
Innovative laboratory testing. International Journal of Rock Mechanics and Mining Sciences41(8): 1427–1445.
17.
LølandKE (1980)
Continuous damage model for load-response estimation of concrete. Cement and Concrete Research10(3): 395–402.
18.
MogiK (1962)
Magnitude frequency relation for elastic shocks accompanying fracture of various materials and some related problems in earthquakes. Bulletin of the Earthquake Research Institute 40: 831–853.
19.
MurtiVZhangWValliappanS (1991)
Stress invariants in an orthotropic damage space. Engineering Fracture Mechanics40(6): 985–990.
20.
OhtsuMWatanabeH (2001)
Quantitative damage estimation of concrete by acoustic emission. Construction and Building Materials15(5-6): 217–224.
21.
OhtsuMYuyamaSImanakaT (1987)
Theoretical treatment of acoustic emission sources in microfracturing due to disbanding. The Journal of the Acoustical Society of America82(2): 506–512.
22.
SumaracDKrajcinovicD (1989)
A mesomechanical model for brittle deformation processes: Part II. Journal of Applied Mechanics56(1): 57–62.
23.
SuzukiTOhtsuM (2014)
Damage estimation of concrete canal due to earthquake effects by acoustic emission method. Construction and Building Materials67: 186–191.
24.
SuzukiTOhtsuMShigeishiM (2007)
Relative damage evaluation of concrete in a road bridge by AE rate-process analysis. Materials and Structures40(2): 221–227.
25.
SuzukiTShiotaniTOhtsuM (2017)
Evaluation of cracking damage in freeze-thawed concrete using acoustic emission and X-ray CT image. Construction and Building Materials136: 619–626.
26.
TianYYuRGZhangY (2020)
Application of felicity effect in crack stress identification and quantitative damage assessment of limestone. Rock Mechanics and Rock Engineering53(6): 2907–2913.
27.
WangXWenZJJiangYJ, et al.. (2018)
Experimental study on mechanical and acoustic emission characteristics of rock-like material under non-uniformly distributed loads. Rock Mechanics and Rock Engineering51(3): 729–745.
28.
WatanabeTSassaK (1995)
Velocity and amplitude of P-waves transmitted through fractured zones composed of multiple thin low-velocity layers. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts32(4): 313–324.
29.
XuJKZhouRSongDZ, et al.. (2019)
Deformation and damage dynamic characteristics of coal-rock materials in deep coal mines. International Journal of Damage Mechanics28(1): 58–78.
30.
YangWDLiGZRanjithPG, et al.. (2019)
An experimental study of mechanical behavior of brittle rock-like specimens with multi-non-persistent joints under uniaxial compression and damage analysis. International Journal of Damage Mechanics28(10): 1490–1522.
31.
YuJLiuGYCaiYY, et al.. (2020a)
Time-dependent deformation mechanism for swelling soft rock tunnels in coal mines and its mathematical deduction. International Journal of Geomechanics20(3): 04019186.
32.
YuJLiuZHHeZ, et al.. (2020b)
Fluctuation characteristic test of oblique stress waves in infilled jointed rock and study of the analytic method. Advances in Civil Engineering2020: 1–12.
33.
ZhangYChenYLYuRG, et al.. (2017)
Effect of loading rate on the felicity effect of three rock types. Rock Mechanics and Rock Engineering50(6): 1673–1681.
