The lode angle dependency introduced by anisotropic damage evolution laws is analyzed in detail for initially isotropic materials. Many rupture criteria are obtained, under the proportional loading assumption, by the time integration of different anisotropic damage evolution laws among the three existing families: strain governed, stress governed and plastic strain governed. The cross-analysis of path independent rupture criteria and of anisotropic damage evolution laws finally allows us to improve the Lode angle dependency of (fully coupled) anisotropic damage models.
AsterRCBorchersBThurberC H (2005) Parameter estimation and inverse problems.
Boston:
Elsevier.
2.
BadelPGodardVLeblondJ (2007)
Application of some anisotropic damage model to the prediction of the failure of some complex industrial concrete structure. International Journal of Solids and Structures44(18–19): 5848–5874.
3.
BadreddineHSaanouniKNguyenTD (2015)
Damage anisotropy and its effect on the plastic anisotropy evolution under finite strains. International Journal of Solids and Structures63: 11–31.
4.
BaiYWierzbickiT (2010)
Application of extended Mohr-Coulomb criterion to ductile fracture. International Journal of Fracture161(1): 1–20.
5.
BaiYWierzbickiT (2015)
A comparative study of three groups of ductile fracture loci in the 3D space. Engineering Fracture Mechanics135: 147–167.
6.
BaoYWierzbickiT (2004)
On fracture locus in the equivalent strain and stress triaxiality space. International Journal of Mechanical Sciences46(1): 81–98.
7.
BazantZPGambarovaPG (1984)
Crack shear in concrete: Crack band microplane model. Journal of Structural Engineering110(9): 2015–2036.
8.
BazantZPKimSS (1979)
Plastic fracturing theory for concrete. Journal of Engineeing Mechanics ASCE105: 407–428.
9.
BazantZPPratPC (1988)
Microplane model for brittle-plastic material: I. Theory. Journal of Engineering Mechanics114(10): 1672–1688.
10.
BessonJ (2010)
Continuum models of ductile fracture: A review. International Journal of Damage Mechanics19(1): 3–52.
11.
BillardonRPétryC (2005) Creep damage behaviour of a copper alloy on a large temperature range. In: ASME/ASCE/SES conference on mechanics and materials, 1–3 June, Baton Rouge, Louisiana, USA.
12.
BrobergH (1974)
A new criterion for brittle creep rupture. ASMEJournal of Applied Mechanics41(3): 809–881.
13.
BrünigMGerkeSHagenbrockV (2013)
Micro-mechanical studies on the effect of the stress triaxiality and the lode parameter on ductile damage. International Journal of Plasticity50: 49–65.
14.
CaoT-SGachetJ-MMontmitonnetP, et al. (2014)
A lode-dependent enhanced lemaitre model for ductile fracture prediction at low stress triaxiality. Engineering Fracture Mechanics124–125: 80–96.
15.
CarolIRizziEWillamK (2001)
On the formulation of anisotropic elastic degradation. Part I: Theory based on a pseudo-logarithmic damage tensor rate. International Journal of Solids and Structures38(4): 491–518.
16.
ChabocheJ-L (1978) Description thermodynamique et phénoménologique de la viscoplasticité cyclique avec endommagement. Doctorat d’Etat Université Paris VI and Technical report, Onera 1978-3.
17.
ChabocheJ-L (1979) Le concept de contrainte effective appliqué à l’élasticité et à la viscoplasticité en présence d’un endommagement anisotrope. In Col. Euromech 115, Grenoble, Eds du CNRS 1982.
18.
ChabocheJ-L (1984)
Anisotropic creep damage in the framework of continuum damage mechanics. Nuclear Engineering and Design79(3): 309–319.
19.
ChambartMDesmoratRGatuingtF (2014)
Intrinsic dissipation of a modular anisotropic damage model: Application to concrete under impact. Engineering Fracture Mechanics127: 161–180.
20.
ChuCCNeedlemanA (1980)
Void nucleation effects in biaxially stretched sheets. Journal of Engineering Materials and Technology102(3): 249–256.
21.
CockroftMLathamD (1968)
Ductility and workability of metals. Journal of the Institute of Metals96: 33–39.
22.
CoppolaTCorteseLFolgaraitP (2009)
The effect of stress invariants on ductile fracture limit in steels. Engineering Fracture Mechanics76(9): 1288–1302.
23.
CordeboisJPSidoroffF (1982)
Anisotropic damage in elasticity and plasticity. Journal de Mécanique Théorique et Appliquée, Numéro Spécial45–60.
24.
CoulombCA (1776)
Essai sur une application des règles des maximis et minimis à quelques problèmes de statique relatifs à l’architecture. Mémoires de mathématiques et de physique présentés à l'Académie royale des sciences par divers savants, et lus sans ses assemblées7: 343–387.
25.
DanasKPonte CastañedaP (2012)
Influence of the lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials. International Journal of Solids and Structures49(11–12): 1325–1342.
26.
DefaisseCMazièreMMarcinL, et al. (2018)
Ductile fracture of an ultra-high strength steel under low to moderate stress triaxiality. Engineering Fracture Mechanics194: 301–318.
27.
DenoualCBarbierGHildF (1997)
A probabilistic approach for fragmentation of brittle materials under dynamic loading. Comptes Rendus de L'académie Des Sciences - Series Iib - Mechanics-Physics-Chemistry-Astronomy325(12): 685–691.
28.
DenoualCHildF (2000)
A damage model for the dynamic fragmentation of brittle solids. Computer Methods in Applied Mechanics and Engineering183(3-4): 247–258.
29.
DesmoratR (2004) Modèle d’endommagement anisotrope avec forte dissymétrie traction/compression, 5e journées scientifiques du Regroupement Francophone pour la Recherche et la Formation sur le Béton (RF2B), Liège, Belgique, 5–6 July.
30.
DesmoratR (2006)
Positivity of intrinsic dissipation of a class of nonstandard anisotropic damage models. Comptes Rendus de L’Académie Des Sciences, Paris334(10): 587–592.
31.
DesmoratR (2012) Continuum approach in damage mechanics. In: Summer School Hardening and Damage of Materials Under Finite Deformations, Constitutive Modeling and Numerical Implementation, IBZ TU Dortmund, Germany,
3–7 September. Available at: http://www.lem3.fr/summerschool/00-Files/RD.pdf (accessed 29 July 2020).
32.
DesmoratR (2016)
Anisotropic damage modeling of concrete materials. International Journal of Damage Mechanics25(6): 818–852.
33.
DesmoratRCantournetS (2008)
Modeling micro-defects closure effect with isotropic/anisotropic damage. International Journal of Damage Mechanics17(1): 65–96.
34.
DesmoratRDesmoratBOliveM, et al. (2018)
Micromechanics based framework with second-order damage tensors. European Journal of Mechanics – A Solids69: 88–98.,
35.
DesmoratRGatuingtFRagueneauF (2007)
Nonlocal anisotropic damage model and related computational aspects for quasi-brittle materials. Engineering Fracture Mechanics74(10): 1539–1560.
36.
DesmoratRGatuingFRagueneauF (2010)
Nonstandard thermodynamics framework for robust computations with induced anisotropic damage. International Journal of Damage Mechanics19(1): 53–73.
37.
DesmoratROtinS (2008)
Cross-identification isotropic/anisotropic damage and application to anisothermal structural failure. Engineering Fracture Mechanics75(11): 3446–3463.
38.
Di IorioSBriottetLRauchEF, et al. (2007)
Plastic deformation, damage and rupture of PM Ti-6Al-4V at 20 K under monotonic loading. Acta Mater55(1): 105–118.
39.
DysonBFMcLeanD (1977)
Creep of nimonic 80A in torsion and tension. Metal Science11(2): 37–45.
40.
DougillJW (1976)
On stable progressively fracturing solids. Zeitschrift Für Angewandte Mathematik Und Physik ZAMP27(4): 423–437.
41.
DruckerDCPragerW (1952)
Soil mechanics and plastic analysis for limit design. Quarterly of Applied Mathematics10(2): 157–165.
42.
FichantSPijaudier-CabotGLa BorderieC (1997)
Continuum damage modelling: Approximation of crack induced anisotropy. Mechanics Research Communications24(2): 109–114.
43.
FreudenthalAMGeiringerH (1958) The mathematical theories of the inelastic continuum. In: FluggeS (ed.) Elasticity and plasticity.
Berlin:
Springer, pp.229–433.
44.
GaoXZhangTZhouJ, et al. (2011)
On stress-state dependent plasticity modeling: significance of the hydrostatic stress, the third invariant of stress deviator and the non-associated flow rule. International Journal of Plasticity27(2): 217–231.
45.
GovindjeeSKayG JSimoJ C (1995)
Anisotropic modelling and numerical simulation of brittle damage in con- Crete. International Journal for Numerical Methods in Engineering38(21): 3611–3633.
46.
GursonAL (1977)
Continuum theory of ductile rupture by void nucleation and growth – Part I. Yield criteria and flow rules for porous ductile media. Journal of Engineering Materials and Technology99(1): 2–15.
47.
HalmDDragonA (1998)
An anisotropic model of damage and frictional sliding for brittle materials. European Journal of Mechanics – A Solids17(3): 439–460.
48.
HalphenBNguyenQ (1975)
Sur les matériaux standard géneralisés. Journal de Mécanique14: 39–63.
49.
HayhurstDR (1972)
Creep rupture under multiaxial states of stress. Journal of the Mechanics and Physics of Solids20(6): 381--390.
50.
HayhurstDRLeckieFA (1973)
The effect of creep constitutive and damage relationships upon the rupture time of a solid circular torsion bar. Journal of the Mechanics and Physics of Solids21(6): 431–446.
51.
HildFBouterfARouxS (2015)
Damage measurements via DIC. International Journal of Fracture191(1–2): 77–105.
52.
HersheyAV (1954)
The plasticity of an isotropic aggregate of anisotropic face centred cubic crystals. Journal of Applied Mechanics21: 241–249.
53.
HosfordWF (1972)
A generalized isotropic yield criterion. Journal of Applied Mechanics39(2): 607–609.
54.
JuJ (1989)
On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects. International Journal of Solids and Structures25(7): 803–833.
55.
JohnsonAEHendersonJKhanB (1962)
Creep of a solid metallic bar or thick-walled tube of circular section, at elevated temperatures, when subject to various combinations of uniform bending moment, torque and axial load. International Journal of Mechanical Sciences4(3): 195–203.
56.
JohnsonAEHendersonJMathurVD (1956) Combined stress creep fracture of a commercial copper at 250 C. Engineer (London) 202: 261–265 and 299–301.
57.
JohnsonAEHendersonJMathurYD (1960)
Complex stress creep fracture of an aluminium alloy: An investigation conducted at an elevated temperature. Aircraft Engineering and Aerospace Technology32(6): 161–170.
58.
KachanovLM (1958) Time of the rupture process under creep conditions. Izvestiia Akademii Nauk SSSR, Otdelenie Teckhnicheskikh Nauk 8: 26--31.
59.
KuhlERammE (1998)
On the linearization of the microplane model. Mechanics of Cohesive-Frictional Materials3(4): 343–364.
60.
LadevèzeP (1983) Sur une théorie de l’endommagement anisotrope. Internal report 34 of lmt-cachan. France: ENS-Cachan.
61.
LadevèzeP (1995)
Modeling and simulation of the mechanical behavior of CMCS. High-Temperature Ceramic-Matrix Composites47: 53–63.
62.
LadevèzePLemaitreJ (1984) Damage effective stress in quasi unilateral conditions. In: 16th International Congress on Theoretical and Applied Mechanics, Lyngby, Denmark.
63.
LeckieFAHayhurstDR (1974)
Creep rupture of structures. Proceedings of the Royal Society of London, Series A340: 323–347.
64.
LeckieFAOnatET (1981) Tensorial nature of damage measuring internal variables. In: Physical Non-Linearities in Structural Analysis.
Springer,
Berlin, Heidelberg, pp.140–155.
65.
LemaitreJ (1971) Evaluation of dissipation and damage in metals. In: Proceedings of International Congress of Mathematicians, Kyoto, Japan.
66.
LemaitreJ (1984)
How to use damage mechanics. Nuclear Engineering and Design80(2): 233–245.
67.
LemaitreJ (1985)
A continuous damage mechanics model for ductile fracture. ASMEJournal of Engineering Materials and Technology107(1): 83–89.
68.
LemaitreJ (1992) A Course on Damage Mechanics.
Berlin:
Springer Verlag.
69.
LemaitreJChabocheJL (1991) Mécanique des matériaux solides (Mechanics of solid materials). Oxford: Oxford University Press.
70.
LemaitreJChabocheJ LBenallalA, et al. (2009) Mécanique Des Matériaux Solides. 3rd ed.France:
Dunod.
LemaitreJDesmoratRSauzayM (2000)
Anisotropic damage law of evolution. European Journal of Mechanics – A Solids19(2): 187–208.
73.
LemaitreJDufaillyJ (1977) Modélisation et identification de l’endommagement plastique des métaux. In: 3e Congrès Français de Mécanique, Grenoble, France.
74.
LiHFuMWLuJ, et al. (2011)
Ductile fracture: Experiments and computations. International Journal of Plasticity27(2): 147–180.
75.
LindnerD (2016) Towards the fracture prediction of turbomachinery disks: A contribution of the digital image correlation. PhD, Université Paris-Saclay, France.
76.
LodeW (1926)
Versuche über den einflußder mittleren hauptspannung auf das fließen der metalle eisen. Zeitschrift f�r Physik36(11–12): 913–939.
77.
LouYHuhH (2013)
Extension of a shear-controlled ductile fracture model considering the stress triaxiality and the lode parameter. International Journal of Solids and Structures50(2): 447–455.
78.
MalcherLAndrade PiresFMCésar de SáJMA (2012)
An assessment of isotropic constitutive models for ductile fracture under high and low stress triaxiality. International Journal of Plasticity30–31: 81–115.
79.
MalcherLMamiyaEN (2014)
An improved damage evolution law based on continuum damage mechanics and its dependence on both stress triaxiality and the third invariant. International Journal of Plasticity56: 232–261.
80.
MartinJBLeckieF A (1972)
On the creep rupture of structures. Journal of the Mechanics and Physics of Solids20(4): 223–238.
81.
MazarsJ (1984) Application de la mécanique de l’endommagement au comportement non linéaire et à la rupture du béton de structure. Thèse d’Etat Université Paris 6.
82.
MazarsJ (1986)
A description of micro and micro scale damage of concrete structure. Engineering Fracture Mechanics25(5–6): 729–737.
83.
MazarsJBerthaudYAmtaniS (1990)
The unilateral behaviour of damaged concrete. Engineering Fracture Mechanics35(4–5): 629–635.
84.
MenzelAEkhMSteinmannP, et al. (2002)
Anisotropic damage coupled to plasticity: Modelling based on the effective configuration concept. International Journal for Numerical Methods in Engineering54(10): 1409–1430.,
85.
MenzelASteinmannP (2001)
A theoretical and computational setting for anisotropic continuum damage mechanics at large strains. International Journal of Solids and Structures38(52): 9505–9523.
86.
MeschkeGLacknerRMangA (1998)
An anisotropic elastoplastic-damage model for plain concrete. International Journal for Numerical Methods in Engineering42(4): 703–727.
87.
MisesRV (1928)
Mechanik der plastischen formänderung von kristallen. ZAMM - Zeitschrift Für Angewandte Mathematik Und Mechanik8(3): 161–185.
88.
MohrDMarcadetS (2015)
Micromechanically-motivated phenomenological Hosford-Coulomb model for predicting ductile fracture initiation at low stress triaxialites. International Journal of Solids and Structures67-68: 40–55.
89.
MurakamiS (1988)
Mechanical modeling of material damage. Journal of Applied Mechanics55(2): 280–286.
90.
MurakamiSOhnoN (1978) A constitutive equation of creep damage in polycrystalline metals. In: IUTAM Col. Euromech 111 Constitutive Modelling in Inelasticity, Marienbad, Tchecoslovaquie.
91.
NahshonKHutchinsonJ (2008)
Modification of the Gurson model for shear failure. European Journal of Mechanics – A Solids27(1): 1–17.
92.
NashedZ A (1987) New approach to classification and regularization of ill-posed operator equations. In EngHWGroetschCW (eds.) Inverse and Ill-Posed Problems.
Cambridge, MA:
Academic Press, pp.53–75.
93.
NguyenTDung BadreddineHSaanouniK (2011) Plasticité anisotrope non-associée couplée à un endommagement anisotrope en transformations finies. In: 20ème Congrès Français de Mécanique, Besançon, France, 29 August – 2 September.
94.
OnatET (1984)
Effective properties of elastic materials that contain penny shaped voids. International Journal of Engineering Science22(8–10): 1013–1021.
95.
OrtizM (1985)
A constitutive theory for the inelastic behavior of concrete. Mechanics of Materials4(1): 67–93.
96.
OttosenN (1977) A failure criterion for concrete. Journal of Engineering Mechanics 103: 527–535.
97.
PapaETaliercioA (1996)
Anisotropic damage model for the multi-axial static and fatigue behaviour of plain concrete. Engineering Fracture Mechanics55(2): 163–179.
98.
PapasideroJDoquetVMohrD (2015)
Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao-Wierzbicki results revisited. International Journal of Solids and Structures69-70: 459–474.
99.
PröchtelPHäußler-CombeU (2008)
On the dissipative zone in anisotropic damage models for concrete. International Journal of Solids and Structures45(16): 4384–4406.
100.
RabotnovYN (1969) Creep Problem in Structural Members.
North Holland Publishing Company, Amsterdam.
101.
RamtaniSBerthaudYMazarsJ (1992)
Orthotropic behaviour of concrete with directional aspects: Modelling and experiments. Nuclear Engineering and Design133(1): 97–111.
102.
RiceJRTraceyDM (1969)
On the ductile enlargement of voids in triaxial stress fields. Journal of the Mechanics and Physics of Solids17(3): 201–217.
103.
RousselierG (1987)
Ductile fracture models and their potential in local approach of fracture. Nuclear Engineering and Design105(1): 97–111.
104.
SaanouniKForsterCBen HatiraF (1994)
On the anelastic flow with damage. International Journal of Damage Mechanics3(2): 140–169.
105.
SalariMRSaebS aWillamK J, et al. (2004)
A coupled elastoplastic damage model for geomaterials comput. Computer Methods in Applied Mechanics and Engineering193(27–29): 2625–2643.
106.
SdobyrevVP (1958)
Long term strength of alloy EI-437B under complex stresses. Izvestiia Akademii Nauk SSSR, Otdelenie Teckhnicheskikh Nauk4: 92–97.
107.
SteinmannPCarolI (1998)
A framework for geometrically nonlinear continuum damage mechanics. International Journal of Engineering Science36(15): 1793–1814.
108.
TanakaMBuiHD (eds.) (1993) Inverse problems in engineering mechanics. In: Proceedings of the IUTAM international symposium on inverse problems in engineering mechanics, Tokyo, Japan, 11–15 May, 1992.
109.
TvergaardVNeedlemanA (1984)
Analysis of the cup-cone fracture in a round tensile bar. Acta Metallurgica32(1): 157–169.
110.
WillamKWarnkeEP (1975) Constitutive model for the triaxial behaviour of concrete. IABSE Proc 19: 1–30. (Seminar on Concrete Structures Subjected to Triaxial Stresses, Bergamo, Italy, 17–19 May 1974).
111.
Wulfinghoff S, Fassin M and Reese S (2017) Damage growth criterion for anisotropic damage models motivated from micromechanics. International Journal of Solids and Structures 121: 21--32.
112.
XueL (2007)
Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading. International Journal of Solids and Structures44(16): 5163–5181.
113.
YueZMSoyarslanCBadreddineH, et al. (2015)
Identification of fully coupled anisotropic plasticity and damage constitutive equations using a hybrid experimental-numerical methodology with various triaxialities. International Journal of Damage Mechanics24(5): 683–710.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
