Fire represents one of the significant hazards encountered by civil infrastructures, and thus providing appropriate fire safety measures is a major requirement in a building design for ensuring the safety of the occupants. Minimizing fire-induced damage and collapse of structural systems are the primary objectives in the design of concrete structures. An experimental investigation has been carried out to examine the mechanical properties such as compressive, tensile and flexural strengths of concrete exposed to elevated temperature following standard fire curve as per ISO 834. Capacity-based standards have been formulated to predict the residual strength of various grades of concrete exposed to various duration of heating. Stress strain behaviour, elastic modulus, weight loss, spalling and thermal crack pattern of specimens were also investigated. Water–cement ratio and porosity of concrete were found to be the critical factors for strength loss of concrete. A relationship is established between weight loss and strength loss of concrete. Higher grades of concrete were found to have more weight and strength loss than those of lower grades.
AbidMHouXZhengW, et al.(2017) High temperature and residual properties of reactive powder concrete–A review. Construction and Building Materials147: 339–351.
2.
AliMHDinkhaYZHaidoJH (2017) Mechanical properties and spalling at elevated temperature of high performance concrete made with reactive and waste inert powders. Engineering Science and Technology, an International Journal20(2): 536–541.
3.
AnagnostopoulosNSiderisKKGeorgiadisA (2009) Mechanical characteristics of self-compacting concretes with different filler materials, exposed to elevated temperatures. Materials and structures42(10): 1393.
4.
AnandNArulrajGP (2014) Effect of grade of concrete on the performance of self-compacting concrete beams subjected to elevated temperatures. Fire Technology50: 1269–1284.
5.
AnandNGodwinA (2016) Influence of mineral admixtures on mechanical properties of self‐compacting concrete under elevated temperature. Fire and Materials7(40): 940–958.
6.
AnandNArulrajGAravindhanC (2014) Stress-strain behaviour of normal compacting and self compacting concrete under elevated temperatures. Journal of Structural Fire Engineering5(1): 63–76.
7.
AriozO (2007) Effects of elevated temperatures on properties of concrete. Fire Safety Journal42(8): 516–522.
8.
AslaniFSamaliB (2015) Constitutive relationships for self-compacting concrete at elevated temperatures. Materials and Structures48(1–2): 337–356.
9.
AydınSBaradanB (2007) Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars. Cement and Concrete Research37: 988–995.
10.
BastamiMBaghbadraniMAslaniF (2014) Performance of nano-Silica modified high strength concrete at elevated temperatures. Construction and Building Materials68: 402–408.
11.
BuchananAH (2001) Structural design for fire safety, 2nd ed. Chichester, UK: Wiley Publishers.
12.
ChanYNPengGFAnsonM (1999) Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures. Cement and Concrete Composites21(1): 23–27.
13.
ChangYFChenYHSheuMS, et al.(2006) Residual stress–strain relationship for concrete after exposure to high temperatures. Cement and Concrete Research36(10): 1999–2005.
14.
ChenQZhuHJuJW, et al.(2018) Stochastic micromechanical predictions for the effective properties of concrete considering the interfacial transition zone effects. International Journal of Damage Mechanics27(8): 1252–1271.
15.
ChuHYJiangJYSunW, et al.(2016) Mechanical and physicochemical properties of ferro-siliceous concrete subjected to elevated temperatures. Construction and Building Materials122: 743–752.
16.
CorreiaJRLimaJSde BritoJ (2014) Post-fire mechanical performance of concrete made with selected plastic waste aggregates. Cement and Concrete Composites53: 187–199.
17.
CulfikMSOzturanT (2002) Effect of elevated temperatures on the residual mechanical properties of high-performance mortar. Cement and Concrete Research32(5): 809–816.
18.
Daniel PaulTRuskin SamuelGAnandN, et al.(2018) Experimental investigation on stress – strain behavior of concrete subjected to elevated temperature by standard fire. International Journal of Civil Engineering and Technology (IJCIET)9(10): 1676–1685.
19.
Daniel PaulTAnandNPrinceA (2019) Experimental investigation of mechanical properties and physical characteristics of concrete under standard fire exposure. Journal of Engineering, Design and Technology. DOI: 10.1108/JEDT-09-2018-0159.
20.
DemirelBKeleştemurO (2010) Effect of elevated temperature on the mechanical properties of concrete produced with finely ground pumice and silica fume. Fire Safety Journal45(6–8): 385–391.
21.
DiamondS (1972) Identification of hydrated cement constituents using a scanning electron microscope energy dispersive X-ray spectrometer combination. Cement and Concrete Research2(5): 617–632.
22.
DingZLiJ (2018) A physically motivated model for fatigue damage of concrete. International Journal of Damage Mechanics27(8): 1192–1212.
23.
ErgunAKurkluGSerhatBM, et al.(2013) The effect of cement dosage on mechanical properties of concrete exposed to high temperatures. Fire Safety Journal55: 160–167.
24.
ErgünAKürklüGSerhatBM, et al.(2013) The effect of cement dosage on mechanical properties of concrete exposed to high temperatures. Fire Safety Journal55: 160–167.
25.
FletcherIAWelchSToreroJL, et al.(2007) Behaviour of concrete structures in fire. Thermal Science11: 37–52.
26.
FuYFWongYLPoonCS, et al.(2004) Experimental study of micro/macro crack development and stress–strain relations of cement-based composite materials at elevated temperatures. Cement and Concrete Research34: 789–797.
27.
HandooSKAgarwalSAgarwalSK (2002) Physicochemical, mineralogical, and morphological characteristics of concrete exposed to elevated temperatures. Cement and Concrete Research32(7): 1009–1018.
28.
HertzKD (2003) Limits of spalling of fire-exposed concrete. Fire Safety Journal38(2): 103–116.
29.
HusemM (2006) The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete. Fire Safety Journal41: 155–163.
30.
IS 12269:2013. Indian Standard Ordinary Portland Cement, 53 Grade – Specification.
31.
IS 383:1970. Indian Standard Specification for Coarse and Fine Aggregates from Natural Sources for Concrete.
32.
ISO 834-1:1999. Fire resistance tests — elements of building construction — Part 1: General requirements. London: British Standards Institution.
33.
JinLDingZLiDDuX (2018) Experimental and numerical investigations on the size effect of moderate high-strength reinforced concrete columns under small-eccentric compression. International Journal of Damage Mechanics27(5): 657–685.
34.
JinLZhangRDouG, et al.(2018) Experimental and numerical study of reinforced concrete beams with steel fibers subjected to impact loading. International Journal of Damage Mechanics27(7): 1058–1083.
35.
JonaitisBPapinigisV (2005) Effect of long‐term loading and fire temperatures on mechanical properties of concrete. Journal of Civil Engineering and Management11: 283–288.
36.
KalifaPMenneteauFDQuenardD (2000) Spalling and pore pressure in HPC at high temperatures. Cement and Concrete Research30: 1915–1927.
37.
KhaliqWKodurV (2012) High Temperature Mechanical Properties of High-Strength Fly Ash Concrete with and without Fibers. ACI Materials Journal109: 665–674.
38.
Lee KK (2008) Evaluation of concrete behavior under high temperature, Doctoral dissertation, University of Colorado at Boulder.
39.
LiMQianCSunW (2004) Mechanical properties of high-strength concrete after fire. Cement and Concrete Research34: 1001–1005.
40.
LiWSWuJY (2018) A consistent and efficient localized damage model for concrete. International Journal of Damage Mechanics27(4): 541–567.
41.
LinWMLinTDPowers-CoucheLJ (1996) Microstructures of fire-damaged concrete. Materials Journal93: 199–205.
42.
LiuDHeMCaiM (2018) A damage model for modeling the complete stress–strain relations of brittle rocks under uniaxial compression. International Journal of Damage Mechanics27(7): 1000–1019.
43.
LiuYWangWChenYF, et al.(2016) Residual stress-strain relationship for thermal insulation concrete with recycled aggregate after high temperature exposure. Construction and Building Materials129: 37–47.
44.
MaQGuoRZhaoZ, et al.(2015) Mechanical properties of concrete at high temperature—a review. Construction and Building Materials93: 371–383.
45.
MalhotraHL (1956) The effect of temperature on the compressive strength of concrete. Magazine Concrete Res8: 85–94.
46.
MousaMI (2017) Effect of elevated temperature on the properties of silica fume and recycled rubber-filled high strength concretes (RHSC). HBRC Journal13: 1–7.
47.
NoumoweACarreHDaoudA, et al.(2006) High-strength self-compacting concrete exposed to fire test. Journal of Materials in Civil Engineering18: 754–758.
48.
PengGFYangWWZhaoJ, et al.(2006) Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures. Cement and Concrete Research36(4): 723–727.
49.
PhanLTCarinoNJ (2002) Effects of test conditions and mixture proportions on behavior of high-strength concrete exposed to high temperatures. ACI Materials Journal99(1): 54–66.
50.
PhanLTLawsonJRDavisFL (2001) Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete. Materials and Structures34(2): 83–91.
51.
PiastaJSawiczZRudzinskiL (1984) Changes in the structure of hardened cement paste due to high temperature. Matériaux et Construction17: 291–296.
52.
PineaudAPimientaPRemondS, et al.(2016) Mechanical properties of high performance self-compacting concretes at room and high temperature. Construction and Building Materials112: 747–755.
53.
PoonCSAzharSAnsonM, et al.(2001) Comparison of the strength and durability performance of normal and high-strength pozzolanic concretes at elevated temperatures. Cement and Concrete Research31: 1291–1300.
54.
Potha RajuMShobhaMRambabuK (2004) Flexural strength of fly ash concrete under elevated temperatures. Magazine of Concrete Research56: 83–88.
55.
RashadAMSadekDM (2017) An investigation on Portland cement replaced by high-volume GGBS pastes modified with micro-sized metakaolin subjected to elevated temperatures. International Journal of Sustainable Built Environment6: 91–101.
56.
SakrKEl-HakimE (2005) Effect of high temperature or fire on heavy weight concrete properties. Cement and Concrete Research35: 590–596.
57.
SaridemirMSevercanMHCiflikliM, et al.(2016) The influence of elevated temperature on strength and microstructure of high strength concrete containing ground pumice and metakaolin. Construction and Building Materials124: 244–257.
58.
SavvaAManitaPSiderisKK (2005) Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates. Cement and Concrete Composites27: 239–248.
59.
SiderisKKManitaPChaniotakisE (2009) Performance of thermally damaged fibre reinforced concretes. Construction and Building Materials23(3): 1232–1239.
60.
SumaracDKrasuljaM (1998) Damage of plain concrete due to thermal incompatibility of its phases. International Journal of Damage Mechanics7(2): 129–142.
61.
ThomasJHarilalB (2016) Mechanical properties of cold bonded quarry dust aggregate concrete subjected to elevated temperature. Construction and Building Materials125: 724–730.
62.
VargheseAAnandNArulrajGP, et al.(2019) Influence of fibers on bond strength of concrete exposed to elevated temperature. Journal of Adhesion Science and Technology33(14): 1521–1543.
63.
VargheseAJasper Selva SamuelDAnandN, et al.(2018) Studies on behavior of fire affected fiber reinforced concrete. International Journal of Civil Engineering and Technology (IJCIET)9(10): 1668– 1675.
64.
WardehMAToutanjiHA (2017) Parameter estimation of an anisotropic damage model for concrete using genetic algorithms. International Journal of Damage Mechanics26(6): 801–825.
65.
XiaoJFalknerH (2006) On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures. Fire Safety Journal41: 115–121.
66.
XiaoJKonigG (2004) Study on concrete at high temperature in China—an overview. Fire Safety Journal39: 89–103.
67.
XiaoJLiZXieQ, et al.(2016) Effect of strain rate on compressive behaviour of high-strength concrete after exposure to elevated temperatures. Fire Safety Journal83: 25–37.
68.
XiaoJXieMZhangC (2006) Residual compressive behaviour of pre-heated high-performance concrete with blast–furnace–slag. Fire Safety Journal41(2): 91–98.
69.
XuYWongYLPoonCS, et al.(2003) Influence of PFA on cracking of concrete and cement paste after exposure to high temperatures. Cement and Concrete Research33(12): 2009–2016.
70.
YermakNPliyaPBeaucourAL, et al.(2017) Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature: spalling, transfer and mechanical properties. Construction and Building Materials132: 240–250.
71.
YiSTKimJKOhTK (2003) Effect of strength and age on the stress–strain curves of concrete specimens. Cement and Concrete Research33(8): 1235–1244.
72.
YoussefMAMoftahM (2007) General stress–strain relationship for concrete at elevated temperatures. Engineering Structures29: 2618–2634.
73.
YüzerNAközFÖztürkLD (2004) Compressive strength–color change relation in mortars at high temperature. Cement and Concrete Research34: 1803–1807.
74.
ZhengWLiHWangY (2012) Compressive stress–strain relationship of steel fiber-reinforced reactive powder concrete after exposure to elevated temperatures. Construction and Building Materials35: 931–940.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
