In the present work, the total energy equivalence hypothesis was applied in constitutive modeling of engineering materials. The approach originally developed for damaged materials, was extended to modeling not only damage but also other dissipative phenomena, like phase transformation, in a consistent manner. The proposed model was examined by means of parametric studies to show its ability to reflect different experimentally observed features of real materials.
Abu Al-RubRKVoyiadjisGZ (2003) On the coupling of anisotropic damage and plasticity models for ductile materials. International Journal of Solids and Structures40: 2611–2643.
2.
BagARayKKDwarakadasaES (2001) Influence of martensite content and morphology on the toughness and fatigue behavior of high-martensite dual-phase steels. Metallurgical and Materials Transactions A32: 2207–2217.
3.
BasaranCNieS (2004) An irreversible thermodynamics theory for damage mechanics of solids. International Journal of Damage Mechanics13: 205–223.
4.
BasaranCNieS (2007) A thermodynamics based damage mechanics model for particulate composites. International Journal of Solids and Structures44: 1099–1114.
5.
BasaranCYanCY (1998) A thermodynamic framework for damage mechanics of solter joints. Journal of Electronics Packaging120: 379–384.
6.
CauvinATestaRB (1999) Damage mechanics: Basic variables in continuum theories. International Journal of Solids and Structures36: 747–761.
7.
ChabocheJL (1997) Thermodynamic formulation of constitutive equations and application to the viscoplasticity and viscoelasticity of metals and polymers. International Journal of Solids and Structures34(18): 2239–2254.
8.
ChabocheJL (1999) Thermodynamically founded CDM models for creep and other conditions. In: AltenbachHSkrzypekJJ (eds) Creep and Damage in Materials and Structures, New York: Springer-Verlag Wien, pp. 209–278.
9.
ChabocheJ-LKanoutéPRoosA (2005) On the capabilities of mean-field approaches for the description of plasticity in metal matrix composites. International Journal of Plasticity21: 1409–1434.
10.
ChabocheJ-LKruchSMaireJ-F (2001) Towards a micromechanics based inelastic and damage modelling of composites. International Journal of Plasticity17: 411–439.
11.
CherkaouiM (2002) Transformation induced plasticity: Mechanisms and modeling. Journal of Engineering Materials and Technology124: 55–61.
12.
ChowCLLuTJ (1992) An analytical and experimental study of mixed-mode ductile fracture under nonproportional loading. International Journal of Damage Mechanics1: 191–236.
13.
CordeboisJPSidoroffF (1982a) Endommagement anisotrope en élasticité et plasticité. Journal de Mécanique Théorique et Appliquée, Numéro Spécial45–60.
14.
CordeboisJPSidoroffF (1982b) Damage induced elastic anisotropy. In: BoehlerJP (ed.) Mechanical Behavior of Anisotropic Solids, The Hague: Martinus Nijhoff, pp. 761–774.
15.
EgnerH (2012) On the full coupling between thermo-plasticity and thermo-damage in thermodynamic modeling of dissipative materials. International Journal of Solids and Structures49(2): 279–288.
16.
EgnerHEgnerW (2015) Classification of constitutive equations for dissipative materials – general review. In: SkrzypekJJGanczarskiAW (eds) Mechanics of Anisotropic Materials, Switzerland: Springer International Publishing, pp. 247–295.
17.
EgnerHSkoczeńB (2010) Ductile damage development in two-phase materials applied at cryogenic temperatures. International Journal of Plasticity26: 488–506.
18.
EgnerHSkoczeńBRyśM (2015a) Constitutive and numerical modeling of coupled dissipative phenomena in 316L stainless steel at cryogenic temperatures. International Journal of Plasticity64: 113–133.
19.
EgnerHSkoczeńBRyśM (2015b) Constitutive modeling of dissipative phenomena in austenitic metastable steels at cryogenic temperatures. In: AltenbachHBrünigM (eds) Inelastic Behavior of Materials and Structures Under Monotonic and Cyclic Loading. Advanced Structured Materials, 57. Switzerland: Springer International Publishing, pp. 35–49.
20.
EshelbyJD (1957) The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proceedings of the Royal Society A376–396.
21.
FischerFDOberaignerERTanakaK (1997) A micromechanical approach to constitutive equations for phase changing materials. Computational Materials Science9: 56–63.
22.
FischerFDOberaignerERTanakaK (1998) Transformation induced plasticity, revised and updated formulation. International Journal of Solids and Structures35: 2209–2227.
23.
FischerFDReisnerGWernerE (2000) A new view on transformation induced plasticity (TRIP). International Journal of Plasticity16(7–8): 723–748.
FuSHuoYMüllerI (1993) Thermodynamics of pseudoelasticity – An analytical approach. Acta Mechanica99: 1–19.
26.
GanczarskiAWEgnerHMucA (2010) Constitutive models for analysis and design of multifunctional technological materials. In: RustichelliFSkrzypekJ (eds) Innovative Technological Materials: Structural Properties by Neutron Scattering, Synchrotron Radiation and Modeling, Heidelberg, Berlin: Germany: Springer-Verlag, pp. 179–223.
27.
GarionCSkoczeńB (2003) Combined model of strain induced phase transformation and orthotropic damage in ductile materials at cryogenic temperatures. International Journal of Damage Mechanics12(4): 331–356.
28.
GomezJBasaranC (2006) Damage mechanics constitutive model for Pb/Sn solder joints incorporating nonlinear kinematic hardening and rate dependent effects using a return mapping integration algorithm. Mechanics of Materials38: 585–598.
29.
HallbergHHakanssonPRistinmaaM (2007) A constitutive model for the formation of martensite in austenitic steels under large strain plasticity. International Journal of Plasticity23: 1213–1239.
30.
HallbergHHakanssonPRistinmaaM (2010) Thermo-mechanically coupled model of diffusionless phase transformation in austenitic steel. International Journal of Solids and Structures47: 1580–1591.
31.
IwamotoT (2004) Multiscale computational simulation of deformation behavior of TRIP steel with growth of martensitic particles in unit cell by asymptotic homogenization method. International Journal of Plasticity20: 841–869.
32.
KowalskyUAhrensHDinklerD (1999) Distorted yield surfaces-modelling by higher order anisotropic hardening tensors. Computational Materials Science16: 81–88.
33.
KruchSChabocheJ-L (2011) Multi-scale analysis in elasto-viscoplasticity coupled with damage. International Journal of Plasticity27: 2026–2039.
34.
LeblondJBDevauxJDevauxJC (1989) Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases. International Journal of Plasticity5: 551–572.
35.
Lemaitre J (1971) Evaluation of dissipation and damage in metals. In: Proceeding ICM-1 Kyoto, Japan, 15–20 August 1971.
36.
LemaitreJ (1992) A Course on Damage Mechanics, Berlin and New York: Springer-Verlag.
37.
LemaitreJChabocheJL (1978) Aspect phenomenologique de la rapture per endommagement. Journal de Méchanique Applique2: 317–365.
38.
LemaitreJDesmoratR (2005) Engineering Damage Mechanics, Berlin Heidelberg New York: Springer.
39.
LevitasVIOzsoyIB (2009) Micromechanical modeling of stress-induced phase transformations. Part 1. Thermodynamics and kinetics of coupled interface propagation and reorientation. International Journal of Plasticity25: 239–280.
40.
LiSBasaranC (2009) A computational damage mechanics model for thermomigration. Mechanics of Materials41: 271–278.
41.
MahnkenRSchneidtA (2010) A thermodynamics framework and numerical aspects for transformation-induced plasticity at large strains. Archive of Applied Mechanics80: 229–253.
42.
MahnkenRSchneidtAAntretterT (2015) Multi-scale modeling of bainitic phase transformation in multi-variant polycrystalline low alloy steels. International Journal of Solids and Structures54: 156–171.
43.
MahnkenRWolffMSchneidtA (2012) Multi-phase transformations at large strains – Thermodynamic framework and simulation. International Journal of Plasticity39: 1–26.
44.
MurakamiS (2012) Continuum Damage Mechanics: A Continuum Mechanics Approach to the Analysis of Damage and Fracture, Germany: Springer Science+Business Media.
45.
MurakamiSOhnoN (1981) A continuum theory of creep and creep damage. In: PonterARSHayhurstDR (eds) Creep in Structures. Third IUTAM Symposium on Creep in Structures, Berlin: Springer, pp. 422–444.
46.
RyśM (2016) Constitutive modelling of damage evolution and martensitic transformation in 316l stainless steel. Acta Mechanica et Automatica10: 125–133.
47.
SaanouniK (2012) Damage Mechanics in Metal Forming: Advanced Modeling and Numerical Simulation, London: ISTE/Wiley.
48.
SaanouniKForsterCBen HatiraF (1994) On the anelastic flow with damage. International Journal of Damage Mechanics3: 140–169.
49.
SimoJCJuJW (1987) Strain- and stress-based continuum damage models. I –Formulation, II – Computational aspects. International Journal of Solids and Structures23(7): 821–840, 841–869.
50.
SkrzypekJKuna-CiskalH (2003) Anisotropic elastic-brittle-damage and fracture models based on irreversible thermodynamics. In: SkrzypekJGanczarskiA (eds) Anisotropic Behaviour of Damaged Materials, Book Series: Lecture Notes in Applied and Computational Mechanics, vol. 9. Berlin Heidelberg, Berlin, Germany: Springer-Verlag, pp. 143–184.
51.
SosnovskiyLASherbakovSS (2008) Possibility to construct mechanothermodynamics. Nauka i Innovastii60: 24–29.
52.
SosnovskiyLASherbakovSS (2016) Mechanothermodynamics entropy and analysis of damage state of complex systems. Entropy18: 268.
53.
VysotskiyMSVityazPASosnovskiyLA (2011) Mechanothermodynamical system as the new subject of research. Mechanics of Machines, Mechanisms and Materials15: 5–10.
54.
WolffMBöhmMSchmidtA (2006) Modelling of steel phenomena and their interactions – An internal variable approach. Materialwissenschaft und Werkstofftechnik37(1): 147–151.
55.
WolffMBöhmMSuhrB (2009) Comparison of different approaches to transformation-induced plasticity in steel. Materialwissenschaften und Werkstofftechnik40(5–6): 454–459.
56.
YaoWBasaranC (2013) Computational damage mechanics of electromigration and thermomigration. Journal of Applied Physics114: 103708.
