Polymer-Carbon nanotube composites (PCNCs) are a new class of composite materials, which is receiving significant attention both in academia and industry. In this paper, the application of Artificial Intelligence (AI) to the measurement of the elastic modulus of PCNCs was investigated. This is the first time that an AI-based modeling algorithm is used as an alternative tool for nano-indentation methods such as depth-sensing indentation (DSI). To build the model, 138 pair input-target data were gathered from the literature, randomly divided into 88 and 50 data sets and then were respectively trained and tested by the proposed AI model. In the set of the models, matrix type, nanofiller type, processing method, nanofiller content and method of analysis were introduced to the AI model as input layers, while the elastic modulus (either quasi-static E or dynamic ) is used as output parameter. Although the modeling process is done with a nanometer sensitivity, the training and testing set results of the explicit formulations obtained by the AI model showed that artificial intelligent methods have strong potential and can be applied for the measurement of the elastic modulus of PCNCs as a non-destructive testing.
AbdellahiM (2013) A new predictive model for calculating the hardness of metal matrix nanocomposites produced by mechanical alloying. Journal of Materials Research28: 3270–3278.
2.
AbdellahiMBahmanpourHBahmanpourM (2014a) The best conditions for minimizing the synthesis time of nanocomposites during high energy ball milling. Ceramic International40: 9675–9692.
3.
Abdellahi M, Heidari J and Bahmanpour M (2014b) A new predictive model to the bond strength of FRP-to-concrete composite joints. Structure Concrete. 15(4): 509–521.
4.
ArinéroRLévêqueGGirardP, (2007) Image processing for resonance frequency mapping in atomic force modulation microscopy. Review of Scientific Instruments78: 1–6.
5.
AyatollahiMRDoagou-RadSShadlouS (2012) Nano-/microscale investigation of tribological and mechanical properties of epoxy/MWNT nanocomposites. Macromolecular Materials and Engineering297: 689–701.
6.
BajiAMaiY-WWongS-C, (2010) Mechanical behavior of self-assembled carbon nanotube reinforced nylon 6,6 fibers. Composites Science and Technology70: 1401–1409.
7.
BakshiSRBalaniKLahaT, (2007) The nanomechanical and nanoscratchproperties of MWNT reinforced ultrahigh-molecular-weight polyethylene coatings. Journal of the Minerals Metals and Materials Society59: 50–53.
8.
BhandariNLLachRGrellmannW, (2012) Depth-dependent indentation microhardness studies of different polymer nanocomposites. Macromolecular Symposia315: 44–51.
9.
CadekMColemanJNBarronV, (2002) Morphological and mechanical properties of carbon-nanotubereinforced semicrystalline and amorphous polymer composites. Applied Physics Letters81: 5123–5125.
10.
CebeciHGuzman de VilloriaRHartAJ, (2009) Multifunctional properties of high volume fraction aligned carbon nanotube polymer composites with controlled morphology. Composites Sciences and Technology69: 2649–2656.
11.
ChenZDaiXJLambPR, (2012) Practical amine functionalization of multi-walled carbon nanotubes for effective interfacial bonding. Plasma Processes and Polymers9: 733–741.
12.
ChenZDaiXJMagniezK, (2013) Improving the mechanical properties of epoxy using multiwalled carbon nanotubes functionalized by a novel plasma treatment. Composites Part A45: 145–152.
13.
DasBPrasadKERamamurtyU, (2009) Nano-indentation studies on polymer matrix composites reinforced by fewlayer graphene. Nanotechnology20: 125705–125710.
Díez-PascualAMGómez-FatouMAAniaF, (2012) Nanoindentation assessment of the interphase in carbon nanotube-based hierarchical composites. Journal of Physical Chemistry C116: 24193–24200.
16.
DoernerMFNixWD (1986) A method for interpreting the data from depth-sensing indentation instruments. Journal of Materials Research1(4): 601–9.
17.
Dos SantosMNOpeltCVLafrattaFH, (2011) Thermal and mechanical properties of a nanocomposite of a photocurable epoxy-acrylate resin and multiwalled carbon nanotubes. Materials Science and Engineering A528: 4318–4324.
18.
DuttaAKPenumaduDFilesB (2004) Nanoindentation testing for evaluating modulus and hardness of single-walled carbon nanotube–reinforced epoxy composites. Journal of Materials Research19: 158–64.
19.
Fischer-CrippsAC (2004) Nanoindentation, 2nd ed. New York: Springer.
20.
Fischer-CrippsAC (2006) Critical review of analysis and interpretation of nanoindentation test data. Surface and Coating Technology200: 4153–4165.
21.
FloresANaffakhMDíez-PascualAM, (2013) Evaluating the reinforcement of inorganic fullerene-like nanoparticles in thermoplastic matrices by depth-sensing indentation. Journal of Physical Chemistry C117: 20936–20943.
22.
Fung PY (2007) Poly(L-Lactide)/multi walled carbon nanotube composites: Mechanical properties and interaction with osteoblast-like cells in vitro. PhD Thesis, Hong Kong: Polytechnic University.
23.
GaoHChiuC-HLeeJ (1992) Elastic contact versus indentation modelling of multi-layered materials. International Journal of Solids and Structures29(20): 2471–2492.
IshikawaHFudetaniSHirohashiM (2001) Mechanical properties of thin films measured by nanoindenters. Applied Surface Science178: 56–62.
26.
JiangLSpearingSMMonclusMA, (2011) Formation and mechanical characterisation of SU8 composite films reinforced with horizontally aligned and high volume fraction CNTs. Composites Science and Technology71: 1301–1308.
27.
KaraIF (2011) Prediction of shear strength of FRP-reinforced concrete beams without stirrups based on genetic programming. Advances in Engineering Software42: 295–304.
28.
KarousisNTagmatarchisNTasisD (2010) Current progress on the chemical modification of carbon nanotubes. Chemical Reviews110: 5366–5397.
29.
KickelbickG (2003) Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale. Progress in Polymer Science28: 83–114.
30.
KozaJR (1992) Genetic Programming: On the Programming of Computers by Means of Natural Selection, Cambridge, MA: MIT Press.
Lagoudas DC, Thakre PR and Benzerga AA (2006) Nanoindentation on CNT reinforced epoxy nanocomposites. In: Proceedings of the 16th European conference on fracture (ECF16), Alexandroupolis, Greece.
LiX-FLauK-TYinY-S (2008) Mechanical properties of epoxy-based composites using coiled carbon nanotubes. Composites Science and Technology68: 2876–2881.
35.
LiYBWeiBQLiangJ, (1999) Transformation of carbon nanotubes to nanoparticles by ball milling process. Carbon37: 493–497.
36.
LiuZHPanCTLinLW, (2013) Piezoelectric properties of PVDF/MWCNT nanofiber using near-field electrospinning. Sens Actuators A193: 13–24.
37.
MaPCSiddiquiNAMaromG, (2010) Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review. Composites Part A41: 1345–1367.
38.
ManiasE (2007) Nanocomposites: Stiffer by design. Nature Materials6: 9–11.
39.
MartinMTroyonM (2002) Fundamental relations used in nanoindentation: critical examination on experimental measurements. Journal of Materials Research17: 2227–2234.
40.
MionicMJiguetSJudelewiczM, (2010) Study of the mechanical response of carbon nanotubes-SU8 composites by nanoindentation. Physica Status Solidi B247: 3072–3075.
41.
NagyPMAranyiDHorváthP, (2006) Nanoindentation investigation of carbon nanotube–polymer composites. Internet Electron Journal of Molecular Design5: 135–143.
OlekMKempaKJurgaS, (2006) Multiwall carbon nanotubes-based composites-mechanical characterization using the nanoindentation technique. International Journal of Materials Research97: 1235–1238.
44.
OliverWCPharrGM (1992) An improved technique for determining hardness and elastic modulus using load displacement sensing indentation experiments. Journal of Materials Research7: 1564–1583.
45.
OliverWCPharrGM (2004) Measurements of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. Journal of Materials Research19: 3–20.
46.
PenumaduDDuttaAPharrGM, (2003) Mechanical properties of blended single-wall carbon nanotube composites. Journal of Materials Research18: 1849–1853.
47.
PethicaJB (1982) Microhardness tests with penetration depths less than ion implanted layer thickness. In: AshworthVGrantWProctorR (eds) Ion Implantation into Metals, Oxford: Pergamon Press, pp. 147–157.
48.
PrasadKEDasBMaitraU, (2009) Extraordinary synergy in the mechanical properties of polymer matrix composites reinforced with 2 nanocarbons. Proceedings of the National Academy of Sciences106: 13186–1319.
49.
QianHKalinkaGChanKL, (2011) Mapping local microstructure and mechanical performance around carbon nanotube grafted silica fibres: Methodologies for hierarchical composites. Nanoscale3: 4759–4767.
50.
SaridemirM (2011) Empirical modeling of splitting tensile strength from cylinder compressive strength of concrete by genetic programming. Expert System with Applications38: 14257–14268.
51.
SatyanarayanaNRajanKSSSinhaSK, (2007) Carbon nanotube reinforced polyimide thin-film for high wear durability. Tribology Letters27: 181–188.
52.
ShenLPhangIYChenL, (2004) Nanoindentation and morphological studies on nylon-66 nanocomposites. Polymer45: 3341–3349.
53.
SreekanthPSRKanagarajS (2013) Assessment of bulk and surface properties of medical grade UHMWPE based nanocomposites using nanoindentation and microtensile testing. Journal of the Mechanical Behavior of Biomedical Materials18: 140–151.
54.
TehraniMSafdariMAl-HaikMS (2011) Nanocharacterization of creep behavior of multiwall carbon nanotubes/epoxy nanocomposite. International Journal of Plasticity27: 887–901.
55.
TranchidaDPiccaroloSSolimanM (2006) Nanoscale mechanical characterization of polymers by AFM nanoindentations: critical approach to the elastic characterization. Macromolecules39: 4547–4556.
56.
Vieregge J (2014) Mechanical Characterization of Pb-Free Solder Bumps. Minneapolis, MN: Hysitron, Inc.
57.
Wahab KhanMAlamA (2012) Survey of application: genomics and genetic programming, a new frontier. Genomics100: 65–71.
WangS-FShenLZhangW-D, (2005) Preparation and mechanical properties of chitosan/carbon nanotubes composites. Biomacromolecules6: 3067–3072.
60.
WangWXuLLiuF, (2013) Synthesis of isocyanate microcapsules and micromechanical behavior improvement of microcapsule shells by oxygen plasma treated carbon nanotubes. Journal of Materials Chemistry A1: 776–782.
61.
WuC-LLinH-CHsuJ-S, (2009) Static and dynamic mechanical properties of polydimethylsiloxane/carbon nanotube nanocomposites. Thin Solid Films517: 4895–4901.
62.
WuTPanYBaoH, (2011) Preparation and properties of chitosan nanocomposite films reinforced by poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) treated carbon nanotubes. Materials Chemistry and Physics129: 932–938.
