This study addresses cumulative damage and its evolution during the cold dwell fatigue of a near-α titanium alloy. An experimental study was undertaken to examine the evolution of life, strain, strength and damage of 13 titanium IMI 834 samples cut from a single disk forging. The samples were tested in the same dwell-fatigue loading conditions. In the dwell phase, the load is maintained at 80% of ultimate tensile strength (824 MPa, 90% of yield strength) for 30 s. The secant Young’s modulus and inelastic strain at minimum load were measured in order to document the evolution of the irreversible damage against the number of cycles for all specimens. Experimental observations show significant differences in dwell-fatigue life and damage behavior. This mechanical analysis and an analysis of the cumulative Weibull reliability distribution suggest a bimodal dwell-fatigue failure process. Some features of the mechanical behavior can be used to sort the samples according to each of the two failure modes and improve the reliability of the fatigue test campaign.
AnahidMSamalMKGhoshS (2011) Dwell fatigue crack nucleation model based on crystal plasticity finite element simulations of polycrystalline titanium alloys. Journal of the Mechanics and Physics of Solids59: 2157–2176.
2.
Appel F and Oehring M (2003) γ-Titanium aluminide alloys: alloy design and properties. In: Leyens C and Peters M (eds) Titanium and Titanium Alloys: Fundamentals and Applications, pp. 89–152.
3.
BacheM (2003) A review of dwell sensitive fatigue in titanium alloys: The role of microstructure, texture and operating conditions. International Journal of Fatigue25: 1079–1087.
4.
BacheMCopeMDaviesH (1997) Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature. International Journal of Fatigue19: 83–88.
5.
Bocher P, Bridier F, Toubal L, et al. (2009) Dwell-fatigue in near alpha titanium alloys: A multiscale, interdisciplinary challenge. In: 12th international conference on fracture (ICF 12), Ottawa, Canada.
6.
Bompas-SmithJH (1973) Mechanical Survival: The Use of Reliability Data, UK: McGraw-Hill Education.
7.
Boutana MN (2009) Modélisation microstructurale en fatigue/fluage à froid des alliages de titane quasi alpha par le modèle des automates cellulaires. PhD Thesis, École de technologie supérieure, Canada.
8.
BoutanaNBocherPJahaziM (2013) Discrepancy between fatigue and dwell-fatigue behaviour of near alpha titanium alloys simulated by cellular automata. International Journal of Fatigue51: 49–56.
9.
BrandesMCMillsMJWilliamsJC (2010) The influence of slip character on the creep and fatigue fracture of an α Ti-Al alloy. Metallurgical and Materials Transactions A42(13): 3463–3472.
10.
Bridier F (2006) Analyse expérimentale des modes de déformation et d'endommagement par fatigue à 20℃ d'alliage de titane. PhD Thesis, Université de Poitiers, France.
11.
Davies HM (1997) Low temperature dwell sensitive fatigue in near-alpha titanium alloy. PhD Thesis, Swansea University College, UK.
12.
EvansW (1987) Dwell-sensitive fatigue in a near alpha-titanium alloy. Journal of Materials Science Letters6: 571–574.
13.
FatemiAYangL (1998) Cumulative fatigue damage and life prediction theories: A survey of the state of the art for homogeneous materials. International Journal of Fatigue20: 9–34.
14.
GermainLGeyNHumbertM (2005) Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet. Acta Materialia53: 3535–3543.
15.
Jha S and Chandran KSR (2003) An unusual fatigue phenomenon: Duality of the S-N fatigue curve in the -titanium alloy Ti-10V-2Fe-3Al. Scripta Materialia 48: 1207–1212.
16.
Jha S, Caton M and Larsen J (2007) A new paradigm of fatigue variability behavior and implications for life prediction. Materials Science and Engineering: A 468: 23–32.
17.
Jha S and Larsen J (2007) Random heterogeneity scales and probabilistic description of the long-lifetime regime of fatigue. In: Allison JE, Jones JW, Larsen JM, Ritchie RO (eds) Fourth International Conference on Very High Cycle Fatigue (VHCF-4). Ann Arbor, MI: The Minerals, Metals and Materials Society (TMS), pp. 385–396.
18.
JhaSLarsenJRosenbergerA (2005) The role of competing mechanisms in the fatigue-life variability of a titanium and gamma-TiAl alloy. JOM57: 50–54.
19.
JhaSLarsenJRosenbergerA (2009) Towards a physics-based description of fatigue variability behavior in probabilistic life-prediction. Engineering Fracture Mechanics76: 681–694.
20.
JhaSLarsenJRosenbergerA (2003) Dual fatigue failure modes in Ti-6Al-2Sn-4Zr-Wo and consequences on probabilistic life prediction. Scripta Materialia48: 1637–1642.
21.
Le Biavant-Guerrier K (2000) Etude de l'amorçage de fissures de fatigue dans le Ti-6A1-4V. PhD Thesis, Ecole Centrale de Paris, France.
22.
Le Biavant-GuerrierKPommierSPrioulC (2002) Local texture and fatigue crack initiation in a Ti-6Al-4V titanium alloy. Fracture of Engineering Materials & Structures25(6): 527–545.
23.
MoreauAToubalLBocherP (2013) Evaluation of macrozone dimensions by ultrasound and EBSD techniques. Materials Characterization75: 115–128.
24.
Neal DF, Lutjering G, Zwicker U, et al. (1985) Titanium—Science and Technology: Proceeding of the Fifth International Conference on Titanium Congress-Centre, Oberursel, Munich, West Germany, FRG, p.2419. Deutsche Gesellschaft für Metallkunde.
25.
NyahumwaC (2005) Multiple defect distributions on weibull statistical analysis of fatigue life of cast aluminium alloys. African Journal of Science and Technology6(2): 43–54.
26.
PilchakALWilliamsJC (2011) Observations of facet formation in near-α titanium and comments on the role of hydrogen. Metallurgical and Materials Transactions A42(4): 1000–1027.
27.
Reed RC, Green KA, Caron P, et al. (2008) Mean vs. life-limiting fatigue behavior of a nickel-based superalloy. In: Superalloys 2008, Champion, Pennsylvania, 14–18 September 2008.
28.
Ress GS (1995) Crack formation lives and crack propagation bahaviour of a near alpha titanium alloy IMI834. Thesis, Swansea University College.
29.
Toubal L, Bocher P and Moreau A (2009a) Dwell-fatigue life of a near-alpha titanium alloy and ultrasonic measurement correlationI. In: 12th International conference on fracture, Ottawa, Ontario, Canada.
30.
ToubalLBocherPMoreauA (2009b) Dwell-fatigue life dispersion of a near alpha titanium alloy. International Journal of Fatigue31: 601–605.
31.
ToubalLBocherPMoreauA (2010) Macro-regions size measurements in bimodal titanium forgings using 2D autocorrelation method. Metallurgical and Materials Transactions A41: 744–750.
32.
Uta E (2009) Etude des hétérogénéités de texture et de microstructure au sein de disques forgés en IMI834 Influence sur les propriétés en fatigue-dwell. Thesis, Université de Metz.
33.
UtaEGeyNBocherP (2009) Texture heterogeneities in αp/αs titanium forging analysed by EBSD-Relation to fatigue crack propagation. Journal of Microscopy233: 451–459.
34.
Zeng W and Zhou Y (2000) The influence of microstructure on dwell sensitive fatigue in Ti–6.5 Al–3.5 Mo–1.5 Zr–0.3 Si alloy. Materials Science and Engineering: A 290: 33–38.
