This work deals with the development of a new approach to a high-cycle fatigue lifetime prediction, which is made in the stochastic framework and allows taking into account the natural degradation (aging) of material properties. Degradation of properties has been modeled as a process of the reduction of fatigue (endurance) limit. Kinetics of damage accumulation is introduced in the context of the effective stress concept. Mathematical expectation, correlation function and the continuum damage parameter variance have been obtained as functions of time. Analysis of the influence of natural aging process on statistical parameters of damage accumulation as well as on the lifetime has been carried out.
AyoubGNaït-AbdelazizMZaïriF (2011) A continuum damage model for the high-cycle fatigue life prediction of styrene-butadiene rubber under multiaxial loading. International Journal of Solids and Structures48(18): 2458–2466.
2.
BaldwinJMBauerDREllwoodKR (2007) Rubber aging in tires. Part 1: Field results. Polymer Degradation and Stability92: 104–109.
3.
BotvinaLRPetrovaIMGadolinaIV (2010) High-cycle fatigue failure of low-carbon steel after long-term aging. Inorganic Materials46(14): 134–141.
4.
DunnPF (2005) Measurement and Data Analysis for Engineering and Science, New York: CRC Press.
5.
DurrettR (2004) Probability: Theory and Examples, Cambridge: Cambridge University Press.
6.
FatemiAYangL (1998) Cumulative fatigue damage and life prediction theories: A survey of the state of the art for homogeneous materials. International Journal of Fatigue20(1): 9–34.
7.
GorashYAltenbachHLvovG (2012) Modelling of high-temperature inelastic behaviour of the austenitic steel AISI type 316 using a continuum damage mechanics approach. The Journal of Strain Analysis for Engineering Design47: 229–243.
8.
HanakiSYamashitaMUchidaH (2010) On stochastic evaluation of S-N data based on fatigue strength distribution. International Journal of Fatigue32(3): 605–609.
9.
JakubczakHSobczykiewiczWDudekD (1995) Probabilistic fatigue life prediction of degraded structures. In: BicegoVNittaAViswanathanR (eds) Materials Ageing and Component Life Extension, Warley: EMAS, pp. 1231–1240.
10.
KachanovLM (1986) Introduction to Continuum Damage Mechanics, Dorbrecht: M. Nijhoff Publ.
11.
Kowalewski ZL, Szymczak T, Makowska K, et al. (2013) Damage indicators during fatigue of metal matrix composites. In: Proceedings of the the fourth international conference “Nonlinear Dynamics-2013”, Tochka, 2013, pp. 386–391.
12.
LarinAA (2011) Prediction and Analysis of Reliability of Engineering Structures, Kharkov: NTU KhPI, pp. 128(in Russian).
13.
LemaitreJDesmoratR (2005) Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failure, New York: Springer.
14.
LvovGIMovavgarA (2012) Theoretical and experimental study of fatigue strength of plain woven/epoxy composite. Strojniski vestnik – Journal of mechanical Engineering58(3): 175–182.
15.
MansonSS (2006) Fatigue and Durability of Structural Materials, Haford: ASM International.
16.
Melhem HG and Swartz SE (1993) Inspection of bridges for fatigue and remedial measures using an expert system approach. In: International conference STP4 “Structural failure, product liability and technical insurance”, Vienna, Austria, 1993, pp. 309–317. Amsterdam: Elsevier Science Publ.
17.
Mott PH and Roland CM. Aging of natural rubber in air and seawater. Rubber Chemistry and Technology 74: 79–88.
18.
MurakamiS (2012) Continuum Damage Mechanics “A Continuum Mechanics Approach to the Analysis of Damage and Fracture”, New York: Springer.
19.
Nesterenko GI (1997) Fatigue and damage tolerance of aging aircraft structures. In: Proceedings of the FAA-NASA symposium on the continued airworthiness of aircraft structures, FAA Center of Excellence in Computational Modeling of Aircraft Structures, Atlanta, Georgia, 1997, pp. 279–300.
20.
Petrova IM, Gadolina IV, Botvina LR, et al. (2011) Zavodskaya Laboratoriya [Factory Laboratory]. Diagnostika materialov [Diagnostics of materials] 77(1): 58–61 (in Russian).
21.
PhamH (2003) Hand Book of Reliability Engineering, London: Springer-Verlag Limited, 679 p.
22.
Plumtree A and Lemaitre J (1981) Interaction of damage mechanisms during high temperature fatigue. In: Advances in Fracture Research. ICF5, vol. 5, Oxford: Pergamon Press, pp. 2379–2384.
23.
Rathod V, Yadav OP, Rathore A, et al. (2011) Probabilistic modeling of fatigue damage accumulation for reliability prediction. International Journal of Quality, Statistics, and Reliability 2011: Article ID 718901, 10 pp.
24.
Renowicz D, Hernas A, Cieśla M, et al. (2006) Degradation of the cast steel parts working in power plant pipelines. Journal of Achievements in Materials and Manufacturing Engineering 18(1–2): 219–222.
25.
SchijveJ (2003) Fatigue of structures and materials in the 20th century and the state of the art. International Journal of Fatigue25: 679–702.
26.
SchijveJ (2009) Fatigue of Structures and Materials, New York: Springer Science.
27.
Stacey A, Birkinshaw M and Sharp JV (2008) Life extension issues for ageing offshore installations. In: Proceedings of OMAE2008 27th international conference on offshore mechanics and arctic engineering, Estoril, Portugal, 15–20 June 2008, Paper OMAE2008-57411, New York: ASME.
28.
Sveshnikov AA (1968) Applied Methods of a Random Functions Theory. Moscow: Science, 457 pp. (in Russian).
29.
Valliappan S and Chee C (2009) Ageing degradation of concrete dams based on damage mechanics concepts. Computational Structural Engineering. Netherlands: Springer, pp. 21–35.
30.
VodkaOTrubayevO (2013) The method of predicting lifetime of the runner bolted connections in hydroturbine. Vistnuk NTU KhPI. Series: Energy and Thermal Processes and Equipment13(987): 140–148. in Russian.
31.
YangLFatemiA (1998) Cumulative fatigue damage mechanisms and quantifying parameters: A literature review. ASTM Journal of Testing and Evaluation26(2): 89–100.
32.
ZaleteljHHaesenVDedeneL (2013) High cycle fatigue of welded joints with aging influence. Materials and Design45: 190–197.
33.
ZhengX-LLüBJiangH (1995) Determination of probability distribution of fatigue strength and expressions of P-S-N curves. Engineering Fracture Mechanics50: 483–491.
34.
ZhovdakVATarasovaLF (2007) Predicting the Reliability of Mechanical Systems, Kharkov: NTU «KhPI», pp. 108(in Russian).
